Magyarul
- Sándor Kopácsi, Ph.D., senior research fellow
- Address: 1111 Budapest, Kende u. 13-17.
Room number: K 421
Phone: +36 1 279 6268
Fax: +36 1 466 7503
E-mail: kopacsi.sandor@sztaki.mta.hu
Department: Computer Integrated Manufacturing Laboratory
Dr. Sándor Kopácsi received his M.Sc. degree in Electrical Engineering in 1990, Specialised Engineering Degree in measurement and control technique in 1992, PhD in technical sciences in 1995, and MBA in 2000 at the Technical University of Budapest, as well as, Engineer-Economist Degree in 1996 at the Budapest University of Economical Sciences. He has been working for the Computer and Automation research Institute of the Hungarian Academy of Sciences since 1986, where he has at present senior researcher position. He was a visiting researcher at the Korea Institute of Science and Technology in Seoul for three months in 1991, and at the Technical University of Chemnitz-Zwickau in Germany for several months in 1996, 1997 and 1999. He received János Bolyai Research Grant form the Hungarian Academy of Sciences in 1998 for three years in the field of virtual reality-based simulation for planning and analysing flexible manufacturing systems. In 2002-2003 he worked for 10 months in the Institute for Applied Systems Technology Bremen, Germany, where he returned to for three months in 2005 supported by the Hungarian State Scholarship Eötvös. He has been teaching for several years at different departments of the Budapest University of Technology and Economy, he was a guest lecturer at the International Studies Centre of the Corvinus University of Budapest, as well as at the Business School of the Central European University. Since 2005 he has been a part time college professor at the Dennis Gabor College. He has been member of the Public Body of the Hungarian Academy of Sciences, and of the Association for Logic Programming (ALP), as well as of the International Program Committee of the International Association of Science and Technology for Development (IASTED) conferences for several years. He has more than 70 scientific publications in national and international periodicals and conferences, mostly in English. His professional interest includes knowledge-based simulation, animation, artificial intelligence, graphics systems, virtual reality and 3D visualisation.
Publications
[order by time] [order by categories ]ICT
- A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére
- Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter
Date: 2007.
Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 9)
- Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s
- Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter
Date: 2007.
Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 1)
Publication without a category
- INT-MANUS: revolutionary controlling of production processes
- Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F.
Date: 2006.
Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH)
- Knowledge representation and case-based reasoning in a knowledge management system for ambient intelligence products
- Authors: Urosevic, L.; Kopácsi, Sándor; Stokic, D.; Campos, AR; Bognár, G.
Editor: Devedzic, V
Date: 2006.
Published by: AIA 2006. Proceedings of the 24th IASTED international multi-conference on artificial intelligence and applications. Innsbruck, 2006. (Page: 3)
- Some aspects of ambient intelligence
- Authors: Kovács, György; Kopácsi, Sándor
Date: 2006.
Published by: Acta Polytechnica Hungarica (Page: 3)
- Ambient intelligence in product life-cycle management
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R.
Date: 2006.
Published by: Engineering Applications of Artificial Intelligence (Page: 9)
- Service engineering and extended artefact delivery
- Authors: Accacia, G. M.; Kopácsi, Sándor; Kovács, György; Michelini, R. C.; Razzoli, R. P.
Editor: Putnik, G. D.; Cunha, M. M.
Date: 2007.
Published by: Knowledge and technology management in virtual organisations. (Page: 2)
- Intelligens hálózatú gyártórendszerek
- Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 1)
- Multi-agent approach for managing production SME networks for optimising estimated costs/benefits
- Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M.
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 3)
- Use of agents for predictive maintenance and diagnostics of machine tools
- Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T.
Date: 2006.
Published by: CIRP ICME-5. 5th international seminar on intelligent computation in manufacturing engineering. Ischia, 2006. (Volume no.: 5, Page: 6)
- A survey on some aspects of ambient intelligence
- Authors: Kovács, György; Kopácsi, Sándor
Editor: Dolgui, A.; Morel, G.; Pereira, C.
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 2. (Page: 5)
- Application of virtual reality tools for planning, analysing and control of flexible manufacturing systems
- Authors: Kopácsi, Sándor; Haidegger, Géza
Editor: Hamza, MH
Date: 2000.
Published by: Applied informatics (AI'2000). Proceedings of IASTED international conference. Innsbruck, 2000. (Page: 1)
- Synchronized robot control for incremental sheet forming in the cyberspace
- Authors: Kopácsi, Sándor; Nacsa, János; Kisari, Ádám
Date: 2012.
Published by: Informatika, a Gábor Dénes Főiskola Közleményei (Volume no.: X, Page: 8)
- Virtual reality in flexible manufacturing
- Authors: Kopácsi, Sándor; Sárközy, F.; Kovács, György
Editor: Tar, JK
Date: 2002.
Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 2)
- Interactive multimedia test scenarios in digital factory projects
- Authors: Haidegger, Géza; Drozdik, Szilveszter; Bámer, B.; Kovács, György; Sárközy, F.; Nacsa, János; Biró, Zsolt; Kopácsi, Sándor; Boril, ZS; Szalay, T.; Anufriev, A.
Editor: Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 4)
- Some aspects of ambient intelligence
- Authors: Kovács, György; Kopácsi, Sándor
Date: 2005.
Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 9)
- Classification of ideas in an industrial innovation management system
- Authors: Kopácsi, Sándor; Kovács, György; Stokic, D.; Campos, AR
Editor: Mercier-Laurent, E; Debenham, J
Date: 2004.
Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 2)
- Ambient intelligence as enabling technology for modern business paradigms
- Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R.
Date: 2007.
Published by: Robotics and Computer Integrated Manufacturing (Page: 2)
- A survey on some aspects of ambient intelligence
- Authors: Kovács, György; Kopácsi, Sándor
Editor: Dolgui, A; Morel, G; Pereira, CE
Date: 2006.
Published by: INCOM 2006. 12th IFAC/IFIP/IFORS/IEEE/IMS symposium on control problems in manufacturing. Saint-Etienne, 2006. (Page: 5)
- PRO-FACTORY production technologies and EUREKA
- Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 1)
- Requirement engineering for automated production of living cells
- Authors: Nacsa, János; Kopácsi, Sándor
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Page: 1)
- Hot incremental sheet forming of polymers in 3D internet collaboration
- Authors: Paniti, Imre; Nacsa, János; Kopácsi, Sándor; Kisari, Ádám
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 2)
- Incremental sheet forming in cyberspace - a process oriented cognitive robotics application
- Authors: Nacsa, János; Paniti, Imre; Kopácsi, Sándor
Date: 2011. 07. 07.
Published by: CogInfoCom 2011. 2nd international conference on cognitive infocommunications. Budapest, 2011. (Page: 1)
- Robotszimuláció és vezérlés virtuális és valós térben
- Authors: Kopácsi, Sándor; Tusz, Bettina; Molnár, Zsolt; Zatroch, Zoltán
Editor: Istenes, Zoltán; Szabó, Richárd
Date: 2011. 12. 03.
Published by: Robotnap 2011, Neumann János Számítógéptudományi Társaság, Robotika Szakosztály, az ELTE Informatika Karával közös szervezésben, Robotika szakosztály évkönyv 2011
- Agent-based Predictive Maintenance of Machine Tools
- Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János
Date: 2007.
Published by: Proceedings of the Manufacturing 2006 Conference (Page: 1)
- Electronic exam system for students ability in programming
- Authors: Kaczur, Sándor; Kopácsi, Sándor
Date: 2009. 06. 10.
Published by: EDEN 2009. Innovation in learning communities. What did you invent for tomorrow? Conference proceedings. Gdansk, 2009. (Page: 1)
- The global priorities for sustainable, high added value manufacturing, joint European efforts
- Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 2)
- A karbantartás szerepe az élettartamra tervezésben
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Date: 2009.
Published by: Gépgyártás (Issue no.: 4, Page: 2)
- Intelligence management of product life-cycle - a maintenance view
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza
Date: 2008.
Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Page: 1)
- Predictive maintenance and diagnostics of machine tools
- Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T.
Date: 2008.
Published by: IPROMS 2008. 4th IPROMS virtual international conference. Innovative production machines and systems. 2008. (Page: 1)
- Role of maintenance in life-cycle engineering
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Date: 2009.
Published by: Journal of Machine Manufacturing (Issue no.: E, Page: 1)
- Ontology-based safety and reliability issues at the factory control operations
- Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre
Editor: Haidegger, Géza
Date: 2008.
Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 1)
- Ontology-based safety and reliability issues at the factory control operations
- Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 1)
- Managing maintenance in life-cycle engineering
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 7)
- A hybrid simulation-scheduler-quality control system
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor
Date: 1994.
Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 5)
- A knowledge based and a hybrid simulation-scheduling system
- Authors: Kovács, György; Mezgár, István; Nacsa, János; Kopácsi, Sándor; Gavalcová, D.
Date: 1994.
Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 7)
- A knowledge based hybrid system to evaluate flexible manufacturing systems
- Authors: Kopácsi, Sándor; Nacsa, János; Kovács, György
Date: 1994.
Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 2)
- Application of expert and traditional program systems for FMS simulation, scheduling and control
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Gavalcová, D.; Nacsa, János
Date: 1993.
Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 3)
- A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems
- Authors: Kovács, György; Mezgár, István; Nacsa, János; Kopácsi, Sándor; Gavalcová, D.
Editor: Brunnstein, K; Raubold, E
Date: 1994.
Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 9)
- A hybrid simulation-scheduler-quality control system for FMS
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Nacsa, János; Groumpos, P.
Editor: Acar, M; Makra, J; Penney, E
Date: 1994.
Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 6)
- Possibilities of knowledge based simulation for FMS
- Authors: Kopácsi, Sándor
Editor: Kuehn, W; Nagarur, NN
Date: 1994.
Published by: Simulation in manufacturing systems. Proceedings of the 1st international workshop. WORKSIMS '94. Bangkok, 1994 (Page: 1)
- Integrated application of real-time expert systems for FMS evaluation and control
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Gavalcová, D.; Nacsa, János
Editor: Rzevski, G; Pastor, J; Adey, RA
Date: 1993.
Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 8)
- Application of artificial intelligence to problems in advanced manufacturing systems
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Gavalcová, D.
Date: 1994.
Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Page: 1)
- Implementation of a knowledge based simulation system of manufacturing cells
- Authors: Kopácsi, Sándor; Létray, Z.
Date: 1992.
Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 3. (Page: 5)
- A Prolog based manufacturing cell design system
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor
Editor: Hencsey, G; Renner, G
Date: 1992.
Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 9)
- Off-line quality control in manufacturing system design
- Authors: Mezgár, István; Kopácsi, Sándor; Gavalcová, D.
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 6)
- Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems
- Authors: Létray, Z.; Kopácsi, Sándor; Kovács, György
Editor: De Meer, J; Heymer, V; Roth, R
Date: 1992.
Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 4)
- A knowledge based simulation system for flexible manufacturing
- Authors: Kopácsi, Sándor; Kovács, György
Date: 1993.
Published by: Robotics and Automation, 1993. Vol. 1. Proceedings of the IEEE International Conference, Atlanta, 1993 (Page: 8)
- Knowledge based modelling, simulation and evaluation of flexible manufacturing systems
- Authors: Kopácsi, Sándor; Koussoulas, NT; Gavalcová, D.
Editor: Mezgár, I; Bertók, P
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 2)
- Knowledge based modelling, simulation and evaluation of flexible manufacturing systems
- Authors: Kopácsi, Sándor; Koussoulas, NT; Gavalcová, D.
Editor: Mezgár, I; Bertók, P
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 1)
- Tudásalapú gyártórendszer-szimuláció és -termelésütemezés
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor; Gavalcová, D.
Date: 1993.
Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 2)
- Knowledge based hybrid simulation of FMS
- Authors: Kopácsi, Sándor; Kovács, György
Date: 1993.
Published by: Proceedings of IMACS/IFAC second international conference on mathematical and intelligent models in system simulation, MIM-SS'93 Brussels, 1993 (Page: 8)
- Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant
- Authors: Kovács, György; Nacsa, János; Kopácsi, Sándor
Editor: Rudas, IJ
Date: 1999.
Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 4)
- Possibilities of creating real-time Java environment
- Authors: Kopácsi, Sándor; Boros, A.; Bakos, B.
Editor: Hamza, MH
Date: 1998.
Published by: Proceedings of the 16th IASTED International conference. Applied informatics. Garmishc-Partenkirchen, 1998. (Page: 2)
- Virtual reality in flexible manufacturing
- Authors: Kopácsi, Sándor
Editor: Haidegger, G
Date: 1998.
Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1)
- Application of software reuse and object oriented methodologies for the modeling of manufacturing systems
- Authors: Kopácsi, Sándor; Kovács, György; Kmecs, I.; Groumpos, PP
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1)
- Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems
- Authors: Kopácsi, Sándor; Kovács, György; Kmecs, I.; Groumpos, M.
Date: 1997.
Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 9)
- Interactive multimedia applications at the shop floor
- Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor
Date: 1998.
Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 1)
- Virtual reality in flexible manufacturing
- Authors: Kopácsi, Sándor; Efstathiou, J.
Editor: Hamza, MH
Date: 1999.
Published by: Applied informatics. Proceedings of the seventeenth IASTED international conference. Innsbruck, 1999. (Page: 2)
- Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems
- Authors: Kovács, György; Kopácsi, Sándor; Nacsa, János; Haidegger, Géza; Groumpos, P.
Date: 1999.
Published by: COMPUTERS IN INDUSTRY (Page: 1)
- Distributed processing of complex logistics flows
- Authors: Kovács, György; Kopácsi, Sándor; Paganelli, P.
Editor: Hamza, MH
Date: 1999.
Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 1)
- Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant
- Authors: Nacsa, János; Kovács, György; Kopácsi, Sándor
Date: 1999.
Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: S)
- Design of flexible manufacturing systems with reuse in a KB simulation environment
- Authors: Kovács, György; Kopácsi, Sándor; Kmecs, I.
Editor: Kopacek, P
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 3)
- Design of flexible manufacturing systems with reuse in a KB simulation environment
- Authors: Kovács, György; Kopácsi, Sándor; Kmecs, I.
Editor: Esat, II
Date: 1996.
Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 3)
- Design of flexible manufacturing systems with reuse in a KB simulation environment
- Authors: Kovács, György; Kopácsi, Sándor; Kmecs, I.
Editor: Esat, II
Date: 1996.
Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 3)
- Reuse in a simulation environment for flexible manufacturing systems
- Authors: Kopácsi, Sándor; Kovács, György; Gavalcová, D.; Kmecs, I.
Date: 1996.
Published by: APPLIED COMPUTING REVIEW (Page: 2)
- Creating reusable assets from simulation models of flexible manufacturing systems
- Authors: Kopácsi, Sándor; Kovács, György; Gavalcová, D.; Kmecs, I.
Editor: Mayorga, RV
Date: 1996.
Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 3)
- An intelligent design network for manufacturing systems' cooperation
- Authors: Kovács, György; Mezgár, István; Kopácsi, Sándor
Editor: Rudas, IJ
Date: 1997.
Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 5)
- Guidelines on interactive multimedia for use in distance education: the results of EU ACTS projects in interactive multimedia
- Authors: Haidegger, Géza; Kopácsi, Sándor
Editor: Melton, J
Date: 1997.
Published by: 1997 European Distance Education Network (EDEN) conference. Budapest, 1997. (Page: 1)
- Interaktiv multimedia (ipari) alkalmazásai
- Authors: Haidegger, Géza; Kopácsi, Sándor
Date: 1997.
Published by: XXXII. ipari informatika, elektronika, mérés és szabályozás szimpózium előadásai. IEMSZSZ '97. Budapest, 1997. (Page: 1)
- Simulation of FMS with application of reuse and object-oriented technology
- Authors: Kovács, György; Kopácsi, Sándor; Kmecs, I.
Date: 1997.
Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 5)
- Telepresence with remote vision in robotic applications
- Authors: Haidegger, Géza; Kopácsi, Sándor
Editor: Rudas, IJ
Date: 1996.
Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD '96. Budapest, 1996. Vol. 1. (Page: 5)