Magyarul
- Géza Haidegger, Ph.D., senior research fellow
- Address: 1111 Budapest, Kende u. 13-17.
Room number: K 423
Phone: +36 1 279 6207, +36 1 279 6224
Fax: +36 1 4667503
E-mail: haidegger.geza@sztaki.mta.hu
Homepage: http://www.sztaki.hu/munkatars/008001106/
Department: Computer Integrated Manufacturing Laboratory
Graduated at the Technical University of Budapest in 1978, begun to work at the Hungarian Academy of Sciences, Computer and Automation Institute, Mechanical Engineering Automation Department. Obtained his second Diploma in 1982 at the Electrical Faculty, Department of Metrology. He got his Ph.D. in 2002. He has been in charge of the design of industrial control systems, such as CNC, distributed PLC systems, industrial cell-controllers. His attention was directed towards standardized communication methods, and focused on MAP networking. He has initiated the East-European MAP/TOP Interest Group, has been elected as Steering Committee member of EMUG and EEMIG, has directed the operation of the MAP Training Center at CAI. Member in Scientific Societies, author and co-author in numerous publications. Main field of interest: communications in CIM systems, networking and recently multimedia in networked architectures. Car recycling, production technologies for micro- and nano-products, robotics are the presently related R&D topics. Project leader of several Hungarian and joint European projects. 100 ++ publications.
Publications
[order by time] [order by categories ]2011.
- Some interactive multimedia applications in manufacturing
- Authors: Kovács, György; Haidegger, Géza
Date: 2011.
Published by: Abstract book of MURPHYS’2010 Conference
- Interactive multimedia and tele-presence in production
- Authors: Kovács, György; Haidegger, Géza
Date: 2011.
Published by: Journal of Physics: Conference Series (Page: 1)
- The global priorities for sustainable, high added value manufacturing, joint European efforts
- Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 2)
- PRO-FACTORY production technologies and EUREKA
- Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 1)
- Application of TYPUS metrics and KILT modell, recycling and resource-efficient REMAKE solutions
- Authors: Kovács, György; Haidegger, Géza
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 1)
2010.
- ManuFuture konferencia a gyártás jövőjéről a Mach-Tech kiállításon
- Authors: HAJDÚ, György; Haidegger, Géza
Editor: HAJDÚ, György
Date: 2010. 05.
Published by: GÉPGYÁRTÁS L- évfolyam, 2010. GTE Industria szám, HU-ISSN 0016-8580 (Volume no.: L, Page: 3)
- Positioning the MANUFUTURE National Technology Platform to be the driving tool for our surviving national manufacturing
- Authors: Haidegger, Géza; Igaz, Jenő; Borbás, Lajos
Date: 2010. 04.
Published by: Factory automation 2010. Proceedings. Kecskemét, 2010. (Page: 1)
- Some iteractive multimedia applications in manufacturing
- Authors: Kovács, György; Haidegger, Géza
Date: 2010. 09.
Published by: CSIT 2010. Proceedings of the 12th international workshop on computer science and information technologies. Vol. 1. Moscow - St. Petersburg, 2010. (Page: 1)
- A Robotika jövője, ROAD-MAPs for Robotics. in: MANUFACTURING 2010 Conference
- Authors: Perity, Gábor; Haidegger, Géza
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: X)
- Factory of the Future with recycling and resource-efficiency in Manufacturing
- Authors: Bárdos, ZOltánné; Borbás, Lajos; Igaz, Jenő; Haidegger, Géza
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: X)
- Part inspections in 3D; CIS3D, development of a completeness inspection system in 3D for industrial analysis
- Authors: Báthor, Miklós; Wögerer, Ch.; Haidegger, Géza
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Page: 1)
- Prepalnned Recycling as a key element for the Factories of the Future
- Authors: Haidegger, Géza; Dobó, József; Nagy, László
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: X)
- EUREKA and FP7-NMP,
- Authors: Wögerer, Christian; Sebő, Gábor; Csuzdi, Szonja; Haidegger, Géza
Editor: Haidegger, Géza
Date: 2010. 11.
Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: X)
2009.
- Role of maintenance in life-cycle engineering
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Date: 2009.
Published by: Journal of Machine Manufacturing (Issue no.: E, Page: 1)
- Technology platform MINAM - an instrument for micro- and nanomanufacturing in Europe
- Authors: Wögerer, Christian; Dickerhoff, Markus; Haidegger, Géza; Szalay, Tibor
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 5)
- A karbantartás szerepe az élettartamra tervezésben
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Date: 2009.
Published by: Gépgyártás (Issue no.: 4, Page: 2)
- Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs
- Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G.
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 1)
- Ontology-based safety and reliability issues at the factory control operations
- Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 1)
- MANUFUTURE-HU nemzeti technológiai platform, és a magyar gépgyártás jövőképe
- Authors: Igaz, Jenő; Haidegger, Géza
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 1)
- Managing maintenance in life-cycle engineering
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Editor: Haidegger, Géza
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 7)
- Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s
- Authors: Kovács, György; Haidegger, Géza; Stokic, D.
Date: 2009.
Published by: Journal of Machine Manufacturing (Issue no.: E, Page: 1)
2008.
- SME networks for car recycling in Hungary: an agent-based approach
- Authors: Kovács, György; Haidegger, Géza
Editor: Villa, A.; Antonelli, D.
Date: 2008.
Published by: A road map to the development of European SME networks: towards collaborative innovation. (Page: 1)
- Technology platform MINAM - an instrument for micro-and nanomanufacturing in Europe
- Authors: Wögerer, C.; Dickerhoff, M.; Haidegger, Géza; Szalay, T.
Editor: Haidegger, Géza
Date: 2008.
Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 4)
- Ontology-based safety and reliability issues at the factory control operations
- Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre
Editor: Haidegger, Géza
Date: 2008.
Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 1)
- Intelligence management of product life-cycle - a maintenance view
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza
Date: 2008.
Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Page: 1)
- Smart Connected and Interactive Production Control in a Distributed Environment
- Authors: Schlegel, T.; Foursa, M.; Meo, F.; Agirre, J.; Haidegger, Géza
Date: 2008. 06.
Published by: Proceedings of the 4th Intelligent Production Machines and Systems (IPROMS) Virtual Conference
2007.
- National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs
- Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György
Date: 2007.
Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 3)
- Multi-agent approach for managing production SME networks for optimising estimated costs/benefits
- Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M.
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 3)
- Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s
- Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter
Date: 2007.
Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 1)
- Recycling technologies for end-of-life vehicles based on multi-agent software solutions
- Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S.
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 9)
- A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére
- Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter
Date: 2007.
Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 9)
- Tooling for novel ISF-incremental sheet forming
- Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János
Editor: Dudás, I.; Szabó, O.; Varga, Gy.
Date: 2007.
Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 2)
- Micro- and nano-manufacturing technologies managed as an EU technology platform named: MINAM
- Authors: Haidegger, Géza
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 5)
- Car recycling - supported by agent-based solutions
- Authors: Kovács, György; Haidegger, Géza
Date: 2007.
Published by: CSIT'2007. Proceedings of the 9th international workshop on computer science and iformation technologies. Krasnousolsk, Ufa, 2007. Vol. 1. (Page: 1)
- Agent-based Predictive Maintenance of Machine Tools
- Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János
Date: 2007.
Published by: Proceedings of the Manufacturing 2006 Conference (Page: 1)
- Control development for mechatronic sheet metal forming processes
- Authors: Paniti, Imre; Haidegger, Géza
Date: 2007.
Published by: microCAD 2007. International scientific conference. Miskolc, 2007. (Page: 2)
- INT-MANUS: interactive production control in a distributed environment
- Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A.
Editor: Jacko, J. A.
Date: 2007.
Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1)
- Mechatronic systems in sheet metal froming
- Authors: Lammers, E.; Paniti, Imre; Haidegger, Géza; Nacsa, János
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 3)
- Intelligens hálózatú gyártórendszerek
- Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György
Editor: Haidegger, Géza
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 1)
- INT-MANUS: interactive production control in a distributed environment
- Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A.
Date: 2007. 07.
Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1)
2006.
- Ambient intelligence in product life-cycle management
- Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R.
Date: 2006.
Published by: Engineering Applications of Artificial Intelligence (Page: 9)
- Agent-based solutions to support car recycling
- Authors: Kovács, György; Haidegger, Géza
Date: 2006.
Published by: ICM 2006. 3rd IEEE international conference on mechatronics. Budapest, 2006. (Page: 2)
2005.
- Some interactive multimedia applications in production engineering
- Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter
Editor: Rudas, IJ
Date: 2005.
Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 1)
- East-West cooperation
- Authors: Terk, E.; Varblene, U.; Birchall, D.; Haidegger, Géza; Viia, A.
Date: 2005.
Published by: Enterprises in technology-intensive business. Toolkit for coping with international environment and developing management competences. Module 2. (Page: 2)
- Appropriate information processing for telemonitoring of manufacturing processes
- Authors: Szalay, T.; Repcsényi, Z.; Haidegger, Géza
Editor: Monostori, L; Viharos, ZsJ
Date: 2005.
Published by: Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005. (Page: 5)
2004.
- Multimedia technologies provide test scenarios in a national research project
- Authors: Kovács, György; Haidegger, Géza; Popa, A.
Editor: Rudas, I
Date: 2004.
Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 2)
- Interactive multimedia test scenarios in digital factory projects
- Authors: Haidegger, Géza; Drozdik, Szilveszter; Bámer, B.; Kovács, György; Sárközy, F.; Nacsa, János; Biró, Zsolt; Kopácsi, Sándor; Boril, ZS; Szalay, T.; Anufriev, A.
Editor: Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 4)
2003.
- Technology and science for the information society. HUN-TING
- Authors: Haidegger, Géza
Date: 2003.
Published by: Projects of the Centres of Excellence in candidate countries. Cyprus, 2003 (Page: 1)
- Recycling technology implementation by the integration of SME operations
- Authors: Haidegger, Géza; Kovács, György; Bámer, B.
Editor: Tóth, T; Bikfalvi, P; Göndri Nagy, J
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 6)
- Clustering individual truck owners - the implementation of novel ICT solutions
- Authors: Haidegger, Géza; Keul, ZS; Kovács, György; Peredi, Z.
Editor: Tóth, T; Bikfalvi, P; Göndri Nagy, J
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 2)
- Az EU 5. és 6. K+F keretprogramja, EUREKA. Tapasztalatok, lehetőségek, kihívások
- Authors: Haidegger, Géza
Date: 2003.
Published by: Gyorsan megtérülő gépipari technológiai eljárások. Esztergom, 2003 (Page: 9)
2002.
- Intelligent, open architecture controller using knowledge server
- Authors: Nacsa, János; Kovács, György; Haidegger, Géza
Editor: Orbán, PE
Date: 2002.
Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 2)
- Digital factories, production networks
- Authors: Monostori, László; Haidegger, Géza; Váncza, József; Viharos, Zsolt János
Date: 2002.
Published by: ERCIM NEWS (Page: 5)
- Digital enterprises: A national R&D project in Hungary
- Authors: Monostori, László; Haidegger, Géza; Váncza, József; Viharos, Zsolt János
Editor: Maropoulos, PG
Date: 2002.
Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 2)
- Assessment of multimedia technologies for use in digital factory projects
- Authors: Haidegger, Géza; Popa, A.
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 4)
- Are present multimedia technologies good enough for applications in idustrial environment?
- Authors: Popa, A.; Kovács, György; Haidegger, Géza; Stanescu, A.
Editor: Grgic, M
Date: 2002.
Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 1)
2001.
2000.
- Some problems of intelligent control of open CNCs and manufacturing cells
- Authors: Kovács, György; Nacsa, János; Haidegger, Géza
Editor: Rudas, IJ; Tar, JK
Date: 2000.
Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 2)
- Interactive multimedia as an affordable tool in factory environment
- Authors: Haidegger, Géza; Kovács, György
Date: 2000.
Published by: ASI'2000. The annual conference of ICIMS-NOE. Workshop on integration in manufacturing and beyond. IIMB'2000. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Bordeaux, 2000. (Page: 6)
- Application of virtual reality tools for planning, analysing and control of flexible manufacturing systems
- Authors: Kopácsi, Sándor; Haidegger, Géza
Editor: Hamza, MH
Date: 2000.
Published by: Applied informatics (AI'2000). Proceedings of IASTED international conference. Innsbruck, 2000. (Page: 1)
1999.
- Trends in industrial data networks
- Authors: Haidegger, Géza
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 7)
- A vállalat egészét átfogó informatikai rendszer koncepciója
- Authors: Haidegger, Géza; Kovács, György; Mezgár, István
Editor: Tóth, T
Date: 1999.
Published by: Minőségmenedzsment és informatika. (Page: 8)
- Next-generation open controllers needed in the factories of the future
- Authors: Drozdik, Szilveszter; Haidegger, Géza; Herrera, G.
Editor: Herrera Ruiz, G
Date: 1999.
Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 7)
- Műszaki-társadalmi célkitűzések az EU 5. Keretprogramjában
- Authors: Haidegger, Géza
Date: 1999.
Published by: 37. ipari elektronikus mérés és szabályozás szimpózium előadásai. Székesfehérvár, 1999. (Page: C)
- Kutatási-fejlesztési irányok az európai unió 5. keretprogramja tükrében: a GTE pályázati információs központ működése és szolgáltatásai
- Authors: Haidegger, Géza
Editor: Dunai Kovács, B; Róta, E
Date: 1999.
Published by: X. (jubileumi) országos tűzvédelmi konferencia-szeminárium '99. előadásainak gyűjteménye. Gyula, 1999. (Page: 2)
- Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems
- Authors: Kovács, György; Kopácsi, Sándor; Nacsa, János; Haidegger, Géza; Groumpos, P.
Date: 1999.
Published by: COMPUTERS IN INDUSTRY (Page: 1)
1998.
- Interactive multimedia applications at the shop floor
- Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor
Date: 1998.
Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 1)
- International trends on factory data networks. Comments on the 2nd IEEE international workshop on factory communication systems. WFCS'97. Barcelona, 1997
- Authors: Fuertes, JM; Haidegger, Géza
Editor: Benyó, Z; Ivanyos, L
Date: 1998.
Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of the INCO COPERNICUS project. Budapest, 1998. (Page: 6)
- Multimedia applications in a virtual enterprise of SME-s
- Authors: Kovács, György; Mezgár, István; Haidegger, Géza
Editor: Dumitrache, I; Stanescu, AM; Pallot, M
Date: 1998.
Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 2)
- Nyílt ipari vezérlőrendszerek
- Authors: Haidegger, Géza
Date: 1998.
Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Budapest, 1998. (Page: 1)
- Intelligent control applications of open CNCs using G2
- Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Date: 1998.
Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1)
- Intelligent control applications of open CNCs using G2
- Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Editor: Haidegger, G
Date: 1998.
Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1)
- Applying SERCOS industrial control network for OSACA based CNC-s
- Authors: Haidegger, Géza; Nacsa, János; Bausz, I.
Editor: Benyó, Z; Ivanyos, L
Date: 1998.
Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of th INCO COPERNICUS project. Budapest, 1998. (Page: 8)
- Az interaktív multimédia
- Authors: Haidegger, Géza
Date: 1998.
Published by: Mérés-automatizálás "98 konferencia az "alkalmazott informatika" jegyében. (Page: 3)
- Hálózatok és interaktív multimédia lehetőségek
- Authors: Haidegger, Géza
Editor: Benyó, Z; Várady, P; Komornik, F
Date: 1998.
Published by: Kárpát-medencei műszaki konferencia. Információs technológiák és technológia transzfer nemzetközi konferencia. Székesfehérvár, 1998. (Page: 5)
- Advanced communication technologies in the factories of the future
- Authors: Haidegger, Géza
Editor: Haidegger, G
Date: 1998.
Published by: Mexican-Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998.
1997.
- Shop-floor communication with OSACA-compliant controllers
- Authors: Haidegger, Géza; Nacsa, János
Editor: Fuertes, JM; Juanole, G
Date: 1997.
Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 3)
- Multimedia requirements for management and control of manufacturing systems
- Authors: Haidegger, Géza; Kovács, György
Editor: Kopacek, P
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 1)
- Számítógépes gyártásirányítás
- Authors: Erdélyi, F.; Kovács, György; Haidegger, Géza; Hermann, GY
Editor: Erdélyi, F
Date: 1997.
Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 2)
- A multimedia design network for manufacturing systems' management
- Authors: Kovács, György; Mezgár, István; Haidegger, Géza
Editor: Callaos, N; Khoong, CM; Cohen, E
Date: 1997.
Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 3)
- A vállalat egészét átfogó informatikai rendszer koncepciója
- Authors: Haidegger, Géza; Kovács, György; Mezgár, István; Tóth, T.
Editor: Tóth, T
Date: 1997.
Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 8)
- Multimedia design network for manufacturing systems management
- Authors: Kovács, György; Mezgár, István; Haidegger, Géza
Editor: Bacon, C
Date: 1997.
Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 4)
- Interaktiv multimedia (ipari) alkalmazásai
- Authors: Haidegger, Géza; Kopácsi, Sándor
Date: 1997.
Published by: XXXII. ipari informatika, elektronika, mérés és szabályozás szimpózium előadásai. IEMSZSZ '97. Budapest, 1997. (Page: 1)
- Dissemination by guidelines on interactive multimedia, the results of EU ACTS projects
- Authors: Haidegger, Géza
Editor: Fazekas, K; Erényi,
Date: 1997.
Published by: ICOMT '97. 2nd international conference of multimedia technology and digital telecommunication services. Proceedings. Budapest, 1997. (Page: 9)
- Factory communication systems to meet multi-media requirements
- Authors: Haidegger, Géza; Nacsa, János
Editor: Fuertes, JM; Juanole, G
Date: 1997.
Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 3)
- Guidelines on interactive multimedia for use in distance education: the results of EU ACTS projects in interactive multimedia
- Authors: Haidegger, Géza; Kopácsi, Sándor
Editor: Melton, J
Date: 1997.
Published by: 1997 European Distance Education Network (EDEN) conference. Budapest, 1997. (Page: 1)
- Informatika a gazdaságban
- Authors: Erdélyi, F.; Szakál, L.; Haidegger, Géza; Vadász, D.
Editor: Erdélyi, F
Date: 1997.
Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 3)
- Built-in intelligent control applications of open CNCs
- Authors: Nacsa, János; Haidegger, Géza
Editor: Monostori, L
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 3)
1996.
- Telepresence with remote vision in robotic applications
- Authors: Haidegger, Géza; Kopácsi, Sándor
Editor: Rudas, IJ
Date: 1996.
Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD '96. Budapest, 1996. Vol. 1. (Page: 5)
- Látórendszerek a mechatronikában
- Authors: Haidegger, Géza
Date: 1996.
Published by: Mechatronika '96. 7. Mechatroninfo konferencia előadásainak anyaga. Budapest, 1996. (Page: 7)
- Linking remote intelligent vision systems
- Authors: Haidegger, Géza
Editor: King, TG; Lima, M; Parkin, RM
Date: 1996.
Published by: MECHATRONICS '96 - MMVIP '96. The 5th UK mechatronics forum international conference. The 3rd international conference on mechatronics and machine vision in practice. Proceedings. Guimaraes, 1996. Vol. 1. (Page: 1)
- Intelligent control of manufacturing systems using open communications
- Authors: Kovács, György; Nacsa, János; Haidegger, Géza
Editor: Gertler, JJ; Cruz, JB[JR]; Peshkin, M
Date: 1996.
Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 1)
1995.
- Open systems in manufacturing
- Authors: Haidegger, Géza; Kovács, György
Editor: Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 2)
- Open systems in manufacturing, European and world-wide harmonized initiatives
- Authors: Haidegger, Géza
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 5)
- Highly automated flexible assembly system
- Authors: Haidegger, Géza; Kuba, R.
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 3)
- Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában
- Authors: Kovács, György; Haidegger, Géza
Date: 1995.
Published by: GEPGYARTASTECHNOLOGIA (Issue no.: 3, Page: 1)
- EMUG, EMTUG, EUROSMIG és AIT. Kapcsolódási lehetőségeink európai közösségi projektekhez
- Authors: Haidegger, Géza
Date: 1995.
Published by: MicroCAD '95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 8)
- Distributed multimedia for advanced applications
- Authors: Haidegger, Géza; Bisztray, F.
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 2)
1994.
- Nyílt rendszerek a gyártás-automatizálásban
- Authors: Haidegger, Géza; Nagy, G.
Date: 1994.
Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 4)
- The applicability of MMS in the future manufacturing systems
- Authors: Haidegger, Géza; Nagy, G.
Date: 1994.
Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 2)
- Ivhegesztő robotos CAD/CAM munkaállomás specifikálása
- Authors: Haidegger, Géza; Nacsa, János; Vass, J.; Pepper, S.
Date: 1994.
Published by: IX. hegesztési szeminárium. Siófok, 1994 (Page: 1)
- Intelligens lézer szenzor MAP interfészének kifejlesztése
- Authors: Haidegger, Géza; Nagy, G.; Kuba, R.; Löffler, T.
Date: 1994.
Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 1)
- Distributed control of assembly cells based on virtual manufacturing device model
- Authors: Nagy, G.; Haidegger, Géza
Editor: De la Puente, JA; Rodd, MG
Date: 1994.
Published by: DCCS'94. Distruted computer control systems. Preprints of the 12th IFAC workshop. Toledo, 1994 (Page: 7)
- Cell-controller design for a flexible PCB drilling station
- Authors: Haidegger, Géza; Nagy, G.
Editor: Acar, M; Makra, J; Penney, E
Date: 1994.
Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 4)
1993.
- Plans of the MAP training centre in Budapest
- Authors: Kovács, György; Haidegger, Géza; Nacsa, János; Nagy, G.
Date: 1993.
Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 8)
- Object oriented approach for analyzing, designing and controlling manufacturing cells
- Authors: Nagy, G.; Haidegger, Géza
Date: 1993.
Published by: AUTOFACT '93 Conference proceedings. Chicago, 1993 (Page: 1)
- MMS/MAP based and object oriented software approach for controlling shop-floor devices in a CIM enviroment
- Authors: Nagy, G.; Haidegger, Géza
Date: 1993.
Published by: 9th international conference on control systems and computer science. CSCS 9. Conference preprints. Bucharest, 1993. Vol. 1. (Page: 3)
- East-European requirements for open systems solutions
- Authors: Harangozó, J.; Haidegger, Géza
Date: 1993.
Published by: European MAP/TOP users group international conference working with open systems. Paris, 1993 (Page: 1)
1992.
- Nyíl rendszerek a mechatronikában
- Authors: Haidegger, Géza; Nacsa, János; Nagy, G.
Date: 1992.
Published by: MECHATRONINFO'92 nemzetközi részvételű konferencia előadásainak anyaga (Page: 1)
- OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban
- Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Date: 1992.
Published by: MERES ES AUTOMATIKA (Page: 1)
- MAP activities in Hungary - setting up a "MAP Training Center
- Authors: Nacsa, János; Haidegger, Géza
Date: 1992.
Published by: The enterprise networking event 1992. ENE'92. conference. Training others in OSI forum. Washington, 1992 (Page: 1)
- MAP Training Center as a test-bed for OSI products in manufacturing
- Authors: Nacsa, János; Haidegger, Géza; Kovács, György
Date: 1992.
Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 3)
- First experiences with a MAP-networked CIM pilot plant
- Authors: Kovács, György; Haidegger, Géza; Nacsa, János
Editor: Hencsey, G; Renner, G
Date: 1992.
Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 1)
- Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria
- Authors: Ruiz, GH; Mazzotti, CG; Kovács, György; Haidegger, Géza
Date: 1992.
Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 4)