SZTAKI: Personal information

Magyar
SZTAKIWeb English Search Phonebook Kopácsi Sándor
Sándor Kopácsi, Ph.D., senior research fellow Address: 1111 Budapest, Kende u. 13-17. Room number: K 421 Phone: +36 1 279 6268 Fax: +36 1 466 7503 E-mail: kopacsiEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.hu Department: Computer Integrated Manufacturing Laboratory Dr. Sándor Kopácsi received his M.Sc. degree in Electrical Engineering in 1990, Specialised Engineering Degree in measurement and control technique in 1992, PhD in technical sciences in 1995, and MBA in 2000 at the Technical University of Budapest, as well as, Engineer-Economist Degree in 1996 at the Budapest University of Economical Sciences. He has been working for the Computer and Automation research Institute of the Hungarian Academy of Sciences since 1986, where he has at present senior researcher position. He was a visiting researcher at the Korea Institute of Science and Technology in Seoul for three months in 1991, and at the Technical University of Chemnitz-Zwickau in Germany for several months in 1996, 1997 and 1999. He received János Bolyai Research Grant form the Hungarian Academy of Sciences in 1998 for three years in the field of virtual reality-based simulation for planning and analysing flexible manufacturing systems. In 2002-2003 he worked for 10 months in the Institute for Applied Systems Technology Bremen, Germany, where he returned to for three months in 2005 supported by the Hungarian State Scholarship Eötvös. He has been teaching for several years at different departments of the Budapest University of Technology and Economy, he is a guest lecturer in the International Studies Centre of the Corvinus University of Budapest, and full time professor at the Dennis Gabor College. He has been member of the Public Body of the Hungarian Academy of Sciences, and of the Association for Logic Programming (ALP), as well as of the International Program Committee of the International Association of Science and Technology for Development (IASTED) conferences for several years. He has more than 50 scientific publications in national and international periodicals and conferences, mostly in English. His professional interest includes knowledge-based simulation, animation, artificial intelligence, graphics systems and virtual reality. Publications [order by time] [order by categories ] [order by authors] Accacia, G.M. Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Anufriev, A. Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) Anufriev, A Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Bakos, B Possibilities of creating real-time Java environment. Authors: Kopácsi, S; Boros, A; Bakos, B Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the 16th IASTED International conference. Applied informatics. Garmishc-Partenkirchen, 1998. (Page: 220-222-) Biró, Zsolt Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Bognár, G Knowledge representation and case-based reasoning in a knowledge management system for ambient intelligence products Authors: Urosevic, L; Kopácsi, Sándor; Stokic, D; Campos, AR; Bognár, G Editor: Devedzic, V Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: AIA 2006. Proceedings of the 24th IASTED international multi-conference on artificial intelligence and applications. Innsbruck, 2006. (Page: 329-334) Boril, ZS Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Boros, A Possibilities of creating real-time Java environment. Authors: Kopácsi, S; Boros, A; Bakos, B Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the 16th IASTED International conference. Applied informatics. Garmishc-Partenkirchen, 1998. (Page: 220-222-) Bámer, B Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Campos, AR Knowledge representation and case-based reasoning in a knowledge management system for ambient intelligence products Authors: Urosevic, L; Kopácsi, Sándor; Stokic, D; Campos, AR; Bognár, G Editor: Devedzic, V Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: AIA 2006. Proceedings of the 24th IASTED international multi-conference on artificial intelligence and applications. Innsbruck, 2006. (Page: 329-334) Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Drozdik, SZ Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Drozdik, Szilveszter A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Drozdik, Szilveszter Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Efstathiou, J Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Efstathiou, J Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied informatics. Proceedings of the seventeenth IASTED international conference. Innsbruck, 1999. (Page: 272-274) Foursa, M. Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: IPROMS 2008. 4th IPROMS virtual international conference. Innovative production machines and systems. 2008. (Length: 1-6. page) Download article: [html] Use of agents for predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: CIRP ICME-5. 5th international seminar on intelligent computation in manufacturing engineering. Ischia, 2006. (Volume no.: 5., Page: 679-683.) Gavalcová, D Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) Off-line quality control in manufacturing system design Authors: Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 61-70) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Knowledge based modelling, simulation and evaluation of flexible manufacturing systems Authors: Kopácsi, S; Koussoulas, NT; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 203-212) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) Knowledge based modelling, simulation and evaluation of flexible manufacturing systems Authors: Kopácsi, S; Koussoulas, NT; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 196-205) Groumpos, M Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) Groumpos, P Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) Groumpos, PP Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Haidegger, G Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Application of virtual reality tools for planning, analysing and control of flexible manufacturing systems. Authors: Kopácsi, S; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Applied informatics (AI'2000). Proceedings of IASTED international conference. Innsbruck, 2000. (Page: 198-202) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) Interaktiv multimedia (ipari) alkalmazásai. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: XXXII. ipari informatika, elektronika, mérés és szabályozás szimpózium előadásai. IEMSZSZ '97. Budapest, 1997. (Page: 1-2) Guidelines on interactive multimedia for use in distance education: the results of EU ACTS projects in interactive multimedia. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: 1997 European Distance Education Network (EDEN) conference. Budapest, 1997. (Page: 166-169) Telepresence with remote vision in robotic applications. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD '96. Budapest, 1996. Vol. 1. (Page: 557-562) Haidegger, Géza The global priorities for sustainable, high added value manufacturing, joint European efforts. Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 232-236.) PRO-FACTORY production technologies and EUREKA. Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 123-129.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Hasenbrink, F. INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Herrmann Praturlon, A. INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Ibarbia, J. INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Kaczur, Sándor Electronic exam system for students ability in programming. Authors: Kaczur, Sándor; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2009. 06. 10. Published by: EDEN 2009. Innovation in learning communities. What did you invent for tomorrow? Conference proceedings. Gdansk, 2009. (Page: 1-6. (CD)) Kisari, Ádám Hot incremental sheet forming of polymers in 3D internet collaboration. Authors: Paniti, Imre; Nacsa, János; Kopácsi, Sándor; Kisari, Ádám Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 237-240.) Kmecs, I Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) Simulation of FMS with application of reuse and object-oriented technology. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396) Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) Kopácsi, S Some aspects of ambient intelligence Authors: Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 96-116) Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Sárközy, F; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259) Application of virtual reality tools for planning, analysing and control of flexible manufacturing systems. Authors: Kopácsi, S; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Applied informatics (AI'2000). Proceedings of IASTED international conference. Innsbruck, 2000. (Page: 198-202) Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2) Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Kovács, GL; Nacsa, J; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484) Distributed processing of complex logistics flows. Authors: Kovács, GL; Kopácsi, S; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Efstathiou, J Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied informatics. Proceedings of the seventeenth IASTED international conference. Innsbruck, 1999. (Page: 272-274) Virtual reality in flexible manufacturing. Authors: Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-3) Possibilities of creating real-time Java environment. Authors: Kopácsi, S; Boros, A; Bakos, B Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the 16th IASTED International conference. Applied informatics. Garmishc-Partenkirchen, 1998. (Page: 220-222-) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) An intelligent design network for manufacturing systems' cooperation. Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516) Simulation of FMS with application of reuse and object-oriented technology. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396) Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Co-operative knowledge processing in software reuse. Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: APPLIED COMPUTING REVIEW (Volume no.: 5, Issue no.: 1, Page: 21-26) Interaktiv multimedia (ipari) alkalmazásai. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: XXXII. ipari informatika, elektronika, mérés és szabályozás szimpózium előadásai. IEMSZSZ '97. Budapest, 1997. (Page: 1-2) Guidelines on interactive multimedia for use in distance education: the results of EU ACTS projects in interactive multimedia. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: 1997 European Distance Education Network (EDEN) conference. Budapest, 1997. (Page: 166-169) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) Telepresence with remote vision in robotic applications. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD '96. Budapest, 1996. Vol. 1. (Page: 557-562) Off-line quality control in manufacturing system design Authors: Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 61-70) Using knowledge based simulation for planning and analysing flexible manufacturing systems. PhD Thesis Authors: Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: (Page: 108) Possibilities of knowledge based simulation for FMS Authors: Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Simulation in manufacturing systems. Proceedings of the 1st international workshop. WORKSIMS '94. Bangkok, 1994 (Page: 127-132) A knowledge based hybrid system to evaluate flexible manufacturing systems Authors: Kopácsi, S; Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) A hybrid simulation-scheduler-quality control system Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Knowledge based modelling, simulation and evaluation of flexible manufacturing systems Authors: Kopácsi, S; Koussoulas, NT; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 203-212) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) A knowledge based simulation system for flexible manufacturing Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Vol. 1. Proceedings of the IEEE International Conference, Atlanta, 1993 (Page: 858-863) Knowledge based modelling, simulation and evaluation of flexible manufacturing systems Authors: Kopácsi, S; Koussoulas, NT; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 196-205) Knowledge based hybrid simulation of FMS Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of IMACS/IFAC second international conference on mathematical and intelligent models in system simulation, MIM-SS'93 Brussels, 1993 (Page: 89-92) Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems Authors: Létray, Z; Kopácsi, S; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420) A Prolog based manufacturing cell design system Authors: Kovács, G; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97) Implementation of a knowledge based simulation system of manufacturing cells Authors: Kopácsi, S; Létray, Z Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 29-32) Implementation of a knowledge based simulation system of manufacturing cells Authors: Kopácsi, S; Létray, Z Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 3. (Page: 553-562) Kopácsi, Sándor Hot incremental sheet forming of polymers in 3D internet collaboration. Authors: Paniti, Imre; Nacsa, János; Kopácsi, Sándor; Kisari, Ádám Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 237-240.) The global priorities for sustainable, high added value manufacturing, joint European efforts. Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 232-236.) PRO-FACTORY production technologies and EUREKA. Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 123-129.) Robotszimuláció és vezérlés virtuális és valós térben Authors: Kopácsi, Sándor; Tusz, Bettina; Molnár, Zsolt; Zatroch, Zoltán Department: Computer Integrated Manufacturing Laboratory Date: 2011. 12. 03. Published by: Robotnap 2011, Neumann János Számítógéptudományi Társaság, Robotika Szakosztály, az ELTE Informatika Karával közös szervezésben, Robotika szakosztály évkönyv 2011 Incremental sheet forming in cyberspace - a process oriented cognitive robotics application. Authors: Nacsa, János; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 07. 07. Published by: CogInfoCom 2011. 2nd international conference on cognitive infocommunications. Budapest, 2011. (Length: 1-5. page) Requirement engineering for automated production of living cells. Authors: Nacsa, János; Kopácsi, Sándor Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Length: 1-3. page) Az európai gyártás stratégiai kutatási terve. Authors: Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2010. 05. Published by: Gépgyártás (Volume no.: 50, Issue no.: Industria, Page: 18-21.) Electronic exam system for students ability in programming. Authors: Kaczur, Sándor; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2009. 06. 10. Published by: EDEN 2009. Innovation in learning communities. What did you invent for tomorrow? Conference proceedings. Gdansk, 2009. (Page: 1-6. (CD)) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: IPROMS 2008. 4th IPROMS virtual international conference. Innovative production machines and systems. 2008. (Length: 1-6. page) Download article: [html] Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Use of agents for predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: CIRP ICME-5. 5th international seminar on intelligent computation in manufacturing engineering. Ischia, 2006. (Volume no.: 5., Page: 679-683.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) A survey on some aspects of ambient intelligence. Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A.; Morel, G.; Pereira, C. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 2. (Page: 529-540.) Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Knowledge representation and case-based reasoning in a knowledge management system for ambient intelligence products Authors: Urosevic, L; Kopácsi, Sándor; Stokic, D; Campos, AR; Bognár, G Editor: Devedzic, V Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: AIA 2006. Proceedings of the 24th IASTED international multi-conference on artificial intelligence and applications. Innsbruck, 2006. (Page: 329-334) A survey on some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC/IFIP/IFORS/IEEE/IMS symposium on control problems in manufacturing. Saint-Etienne, 2006. (Page: 541-552) Some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Acta Polytechnica Hungarica (Volume no.: 3, Issue no.: 1, Page: 35-60) Koussoulas, NT Knowledge based modelling, simulation and evaluation of flexible manufacturing systems Authors: Kopácsi, S; Koussoulas, NT; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 203-212) Knowledge based modelling, simulation and evaluation of flexible manufacturing systems Authors: Kopácsi, S; Koussoulas, NT; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 196-205) Kovács, G Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems Authors: Létray, Z; Kopácsi, S; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420) A Prolog based manufacturing cell design system Authors: Kovács, G; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97) Kovács, GL Some aspects of ambient intelligence Authors: Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 96-116) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Sárközy, F; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259) Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2) Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Kovács, GL; Nacsa, J; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484) Distributed processing of complex logistics flows. Authors: Kovács, GL; Kopácsi, S; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) An intelligent design network for manufacturing systems' cooperation. Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516) Simulation of FMS with application of reuse and object-oriented technology. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396) Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Co-operative knowledge processing in software reuse. Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: APPLIED COMPUTING REVIEW (Volume no.: 5, Issue no.: 1, Page: 21-26) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) A knowledge based hybrid system to evaluate flexible manufacturing systems Authors: Kopácsi, S; Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) A hybrid simulation-scheduler-quality control system Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) A knowledge based simulation system for flexible manufacturing Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Vol. 1. Proceedings of the IEEE International Conference, Atlanta, 1993 (Page: 858-863) Knowledge based hybrid simulation of FMS Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of IMACS/IFAC second international conference on mathematical and intelligent models in system simulation, MIM-SS'93 Brussels, 1993 (Page: 89-92) Kovács, GY Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Kovács, György Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) A survey on some aspects of ambient intelligence. Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A.; Morel, G.; Pereira, C. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 2. (Page: 529-540.) Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) A survey on some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC/IFIP/IFORS/IEEE/IMS symposium on control problems in manufacturing. Saint-Etienne, 2006. (Page: 541-552) Some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Acta Polytechnica Hungarica (Volume no.: 3, Issue no.: 1, Page: 35-60) Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Lichodziejewski, C. Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Létray, Z Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems Authors: Létray, Z; Kopácsi, S; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420) Implementation of a knowledge based simulation system of manufacturing cells Authors: Kopácsi, S; Létray, Z Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 29-32) Implementation of a knowledge based simulation system of manufacturing cells Authors: Kopácsi, S; Létray, Z Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 3. (Page: 553-562) Meo, F. INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: IPROMS 2008. 4th IPROMS virtual international conference. Innovative production machines and systems. 2008. (Length: 1-6. page) Download article: [html] Use of agents for predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: CIRP ICME-5. 5th international seminar on intelligent computation in manufacturing engineering. Ischia, 2006. (Volume no.: 5., Page: 679-683.) Mezgár, I An intelligent design network for manufacturing systems' cooperation. Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516) Off-line quality control in manufacturing system design Authors: Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 61-70) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) A hybrid simulation-scheduler-quality control system Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) A Prolog based manufacturing cell design system Authors: Kovács, G; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97) Mezgár, István Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Michelini, R Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Michelini, R. Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) Michelini, R.C. Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Molnár, Zsolt Robotszimuláció és vezérlés virtuális és valós térben Authors: Kopácsi, Sándor; Tusz, Bettina; Molnár, Zsolt; Zatroch, Zoltán Department: Computer Integrated Manufacturing Laboratory Date: 2011. 12. 03. Published by: Robotnap 2011, Neumann János Számítógéptudományi Társaság, Robotika Szakosztály, az ELTE Informatika Karával közös szervezésben, Robotika szakosztály évkönyv 2011 Nacsa, J Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2) Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Kovács, GL; Nacsa, J; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) A knowledge based hybrid system to evaluate flexible manufacturing systems Authors: Kopácsi, S; Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) Nacsa, János Hot incremental sheet forming of polymers in 3D internet collaboration. Authors: Paniti, Imre; Nacsa, János; Kopácsi, Sándor; Kisari, Ádám Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 237-240.) Incremental sheet forming in cyberspace - a process oriented cognitive robotics application. Authors: Nacsa, János; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 07. 07. Published by: CogInfoCom 2011. 2nd international conference on cognitive infocommunications. Budapest, 2011. (Length: 1-5. page) Requirement engineering for automated production of living cells. Authors: Nacsa, János; Kopácsi, Sándor Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Length: 1-3. page) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Paganelli, P Distributed processing of complex logistics flows. Authors: Kovács, GL; Kopácsi, S; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184) Paniti, Imre Hot incremental sheet forming of polymers in 3D internet collaboration. Authors: Paniti, Imre; Nacsa, János; Kopácsi, Sándor; Kisari, Ádám Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 237-240.) The global priorities for sustainable, high added value manufacturing, joint European efforts. Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 232-236.) Incremental sheet forming in cyberspace - a process oriented cognitive robotics application. Authors: Nacsa, János; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 07. 07. Published by: CogInfoCom 2011. 2nd international conference on cognitive infocommunications. Budapest, 2011. (Length: 1-5. page) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) Puchalski, S. Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Razzoli, R.P. Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Salle, D. INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Schlegel, T. Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) INT-MANUS: revolutionary controlling of production processes Authors: Foursa, M.; Schlegel, T.; Meo, F.; Herrmann Praturlon, A.; Ibarbia, J.; Kopácsi, Sándor; Mezgár, István; Salle, D.; Hasenbrink, F. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Proceedings of the 33d International Conference on Computer Graphics and Interactive Techniques (SIGGRAPH) (Issue no.: 161, Length: 1 page) Download article: [html] Predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: IPROMS 2008. 4th IPROMS virtual international conference. Innovative production machines and systems. 2008. (Length: 1-6. page) Download article: [html] Use of agents for predictive maintenance and diagnostics of machine tools. Authors: Meo, F.; Foursa, M.; Kopácsi, Sándor; Schlegel, T. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: CIRP ICME-5. 5th international seminar on intelligent computation in manufacturing engineering. Ischia, 2006. (Volume no.: 5., Page: 679-683.) Schlegel, Thomas Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Smater, M. Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Stokic, D Knowledge representation and case-based reasoning in a knowledge management system for ambient intelligence products Authors: Urosevic, L; Kopácsi, Sándor; Stokic, D; Campos, AR; Bognár, G Editor: Devedzic, V Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: AIA 2006. Proceedings of the 24th IASTED international multi-conference on artificial intelligence and applications. Innsbruck, 2006. (Page: 329-334) Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Szalay, T Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Sárközy, F Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Sárközy, F; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259) Tusz, Bettina Robotszimuláció és vezérlés virtuális és valós térben Authors: Kopácsi, Sándor; Tusz, Bettina; Molnár, Zsolt; Zatroch, Zoltán Department: Computer Integrated Manufacturing Laboratory Date: 2011. 12. 03. Published by: Robotnap 2011, Neumann János Számítógéptudományi Társaság, Robotika Szakosztály, az ELTE Informatika Karával közös szervezésben, Robotika szakosztály évkönyv 2011 Urosevic, L Knowledge representation and case-based reasoning in a knowledge management system for ambient intelligence products Authors: Urosevic, L; Kopácsi, Sándor; Stokic, D; Campos, AR; Bognár, G Editor: Devedzic, V Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: AIA 2006. Proceedings of the 24th IASTED international multi-conference on artificial intelligence and applications. Innsbruck, 2006. (Page: 329-334) Wögerer, Christian PRO-FACTORY production technologies and EUREKA. Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 123-129.) Zatroch, Zoltán Robotszimuláció és vezérlés virtuális és valós térben Authors: Kopácsi, Sándor; Tusz, Bettina; Molnár, Zsolt; Zatroch, Zoltán Department: Computer Integrated Manufacturing Laboratory Date: 2011. 12. 03. Published by: Robotnap 2011, Neumann János Számítógéptudományi Társaság, Robotika Szakosztály, az ELTE Informatika Karával közös szervezésben, Robotika szakosztály évkönyv 2011 New search