Alpek, F

Investigation of machined surfaces using artificial intelligence methods.

Authors: Szalay, T; Alpek, F; Monostori, L; Markos, S; Viharos, ZJ
Date: 1996.
Published by: Proceedings of the IXth international conference on cutting tools. IX. nemzetközi szerszámkonferencia. Miskolc, 1996. (Page: 635-640)

Fertigungsparameter schätzung zur vorgeschriebenen Oberflächenqualität mittels neuronaler Netze..

Authors: Osanna, PH; Monostori, L; Alpek, F; Viharos, ZJ
Date: 1996.
Published by: Proceedings of the 7th International DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 311-312)

Arai, T

Emergent synthesis methodologies for manufacturing.

Authors: Ueda, K; Márkus, A; Monostori, L; Kals, HJJ; Arai, T
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 50, Issue no.: 2, Page: 535-551)

Aron, R

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)

Authors: Barschdorff, D; Monostori, L; Aron, R; Bothe, A; Kottenstede, T; Wöstenkühler, W
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.) (Page: 21)

Barschdorff, D

Approaches to coupling connectionist and expert systems in intelligent manufacturing.

Authors: Barschdorff, D; Monostori, L; Wöstenkühler, GW; Egresits, CS; Kádár, B
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 5-15)

Approaches to coupling connectionist and expert systems in intelligent manufacturing

Authors: Barschdorff, D; Monostori, L; Wörstenkühler, GW; Egresits, CS; Kádár, B
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 591-608)

Wear estimation and state classification of cutting tools in turning via artificial neural networks

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1993.
Published by: International conference on fault diagnosis (TOOLDIAG'93) Toulouse 1993. Proceedings (Page: 669-677)

Cutting tool monitoring in turning under varying cutting conditions; an artificial neural network approach

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1993.
Published by: Industrial and engineering applications of artificial intelligence and expert systems (IEA/AIE 93) Proceedings of the sixth international conference, Edinburgh, 1993 (Page: 353-359)

Symbolicism and connectionism: rivals or allies in intelligent manufacturing?

Authors: Barschdorff, D; Monostori, L
Date: 1992.
Published by: MANUFACTURING SYSTEMS (Volume no.: 21, Issue no.: 3, Page: 193-199)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik (Page: 100)

Artificial neural networks in intelligent manufacturing

Authors: Monostori, L; Barschdorff, D
Date: 1992.
Published by: ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (Volume no.: 9, Issue no.: 6, Page: 421-437)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)

Authors: Barschdorff, D; Monostori, L; Aron, R; Bothe, A; Kottenstede, T; Wöstenkühler, W
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.) (Page: 21)

Bongaerts, L

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlaine, D; Kádár, B
Date: 2000.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 43, Issue no.: 2, Page: 123-137)

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlane, D; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems, Lausanne, 1998. (Page: 97-113)

Shop floor control architectures for the extended enterprise.

Authors: Janusz, B; Bongaerts, L; Gullander, P; Klingstam, P; Monostori, L; Jordan, P
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-2)

Bothe, A

Convergence behaviour of connectionist models in large scale diagnostic problems

Authors: Monostori, L; Bothe, A
Date: 1992.
Published by: Industrial engineering applications of artificial intelligence and expert systems. Proceedings of the 5th international conference, IEA/AIE-92. Paderborn, 1992(Lecture notes in artificial intelligence 604) (Page: 113-122)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)

Authors: Barschdorff, D; Monostori, L; Aron, R; Bothe, A; Kottenstede, T; Wöstenkühler, W
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.) (Page: 21)

Campi, A

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

Cavalieri, S

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

Cieminski, G

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

Collina, F

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Colorni, A

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Csempesz, János

WindMT: An integrated system for failure detection and maintenance scheduling at wind farms.

Authors: Kovács, András; Csempesz, János; Erdős, Gábor Ferenc; Karnok, Dávid; Kemény, Lőrinc; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: ICAPS 2011. 21st international conference on automated planning and scheduling. Proceedings of system demonstrations. Freiburg, 2011. (Page: 46-49.)

Csongrádi, Z

Realizing the digital factory: monitoring of complex production systems

Authors: Viharos, ZSJ; Monostori, L; Csongrádi, Z
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 29-34)

Realizing the digital factory: monitoring of complex production systems

Authors: Viharos, ZSJ; Monostori, L; Csongrádi, Z
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 31-36)

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

An important aspect of a digital factory: monitoring of complex production systems

Authors: Viharos, ZSJ; Monostori, L; Csongrádi, Z
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration. WESIC 2003. Miskolc, Vol. 2. (Page: 363-370)

Monitoring parameter based determination of production tolerances.

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Kenderesy, T; Csongrádi, Z; Koródi, T
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 574-578)

Csáji , Balázs Csanád

Modeling networks of collaborating enterprises as complex systems.

Authors: Csáji , Balázs Csanád; Monostori, László
Editor: Monostori, László
Date: 2007. 11. 14.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 7-12.)

Csáji, Balázs Csanád

Production structures as complex adaptive systems.

Authors: Monostori, László; Csáji, Balázs Csanád
Date: 2007.
Published by: 40th CIRP international seminar on manufacturing systems. Liverpool, 2007. (Page: 1-8. (CD))

Csáji, B

Simulation supported analysis of a dynamic rescheduling system

Authors: Pfeiffer, A; Kádár, B; Csáji, B; Monostori, L
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 25-30)

Adaptive approaches to increasing the performance of production control systems

Authors: Kádár, B; Csáji, B; Monostori, L
Date: 2005.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 34, Issue no.: 1, Page: 33-43)

Stochastic reactive production scheduling by multi-agent based asynchronous approximate dynamic programming

Authors: Csáji, B; Monostori, L
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3690, Page: 388-397)

Stochastic approximate scheduling by neurodynamic learning

Authors: Csáji, B; Monostori, L
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-6)

Simulation supported analysis of a dynamic rescheduling system

Authors: Pfeiffer, A; Kádár, B; Csáji, B; Monostori, L
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 24-29)

Adaptation and learning in distributed production control

Authors: Monostori, L; Csáji, B; Kádár, B
Date: 2004.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 53, Issue no.: 1, Page: 349-352)

Simulation supported agent-based adaptive production scheduling

Authors: Csáji, B; Kádár, B; Monostori, L; Pfeiffer, A
Date: 2004.
Published by: Global Challenges in Manufacturing. Proceedings of the International IMS Forum 2004. Cernobbio, Part 1. (Page: 658-665)

Learning and cooperation in a distributed market-based production control system

Authors: Csáji, B; Monostori, L; Kádár, B
Date: 2004.
Published by: Emergent Synthesis. Proceedings of the 5th international workshop IWES'04, Budapest (Page: 109-116)

The role of adaptive agents in distributed manufacturing.

Authors: Monostori, L; Kádár, B; Csáji, B
Date: 2002.
Published by: Proceedings of the 4th international workshop on emergent synthesis. IWES'02. Kobe (Page: 135-142)

Csáji, Balázs Csanád

Towards adaptive and digital manufacturing.

Authors: Monostori, László; Csáji, Balázs Csanád; Kádár, Botond; Pfeiffer, András; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2010. 04.
Published by: Annual Reviews in Control (Volume no.: 34, Issue no.: 1, Page: 118-128.)
Download article: [007], [html]

Adaptive approaches to distributed resource allocation.

Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2009.
Published by: Production Systems and Information Engineering (Volume no.: 5, Page: 3-18.)

A complexity model for networks of collaborating enterprises.

Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 13833-13838.)

Complexity-based modeling of reconfigurable collaborations in production industry.

Authors: Schuh, G.; Monostori, László; Csáji, Balázs Csanád; Döring, S.
Date: 2008.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 57, Issue no.: 1, Page: 445-450.)

Complex adaptive systems (CAS) approach to production systems and organisations.

Authors: Monostori, László; Csáji, Balázs Csanád
Editor: Mitsuishi, Mamoru; Ueda, Kanji; Kimura, Fumihiko
Date: 2008.
Published by: 41st CIRP conference on manufacturing systems and technologies for the new frontier. Tokyo, 2008. (Page: 19-24.)

Value function based reinforcement learning in changing Markovian environments.

Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2008.
Published by: Journal of Machine Learning Research (Volume no.: 9, Page: 1679-1709.)

Adaptive stochastic resource control: a machine learning approach.

Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2008.
Published by: Journal of Artificial Intelligence Research (Volume no.: 32, Page: 453-486.)

Komplexität der Bedarfsprognosen und ihre Wirkungen in kooperativen Logistiknetzwerken.

Authors: Egri, Péter; Csáji, Balázs Csanád; Kemény, Zsolt; Monostori, László; Váncza, József
Editor: Dangelmaier, W.; Aufenanger, M.; Klöpper, B.
Date: 2008.
Published by: 10. Paderborner Frühjahrstagung. Reagible Unternehmen in dynamischen Märkten. Paderborn, 2008. (Page: 455-469.)

Reinforcement learning in a distributed market-based production control system

Authors: Csáji, Balázs Csanád; Monostori, László; Kádár, Botond
Date: 2006.
Published by: Advanced Engineering Informatics (Volume no.: 20, Issue no.: 3, Page: 279-288)

Integration of production-, quality- and process monitoring for agile manufacturing

Authors: Viharos, Zsolt János; Kádár, Botond; Monostori, László; Kemény, Zsolt; Csáji, Balázs Csanád; Pfeiffer, András; Karnok, Dávid
Date: 2006.
Published by: XVIII IMEKO world congress. Metrology for a sustainable development. Proceedings. Rio de Janeiro, 2006. (Page: 1-6)

Adaptive algorithms in distributed resource allocation

Authors: Csáji, Balázs Csanád; Monostori, László
Editor: Ueda, K
Date: 2006.
Published by: IWES 2006. 6th international workshop on emergent synthesis. Tokyo, 2006. (Page: 69-75)

Stochastic dynamic production control by neurodynamic programming

Authors: Monostori, László; Csáji, Balázs Csanád
Date: 2006.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 55, Issue no.: 1, Page: 473-478)

Adaptive sampling based large-scale stochastic resource control

Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2006.
Published by: AAAI 2006 - IAAI 2006. 21st national conference on artificial intelligence. 18th conference on innovative applications of artificial intelligence. Boston, 2006. (Page: 815-820)

Csáji, BCS

Adaptive approaches to increasing the performance of production control systems

Authors: Kádár, B; Monostori, L; Csáji, BCS
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 305-312)

Improving multi-agent based scheduling by neurodynamic programming

Authors: Csáji, BCS; Kádár, B; Monostori, L
Date: 2003.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 2744, Page: 110-123)

Di Mascolo, M

An international platform for education and research in the area of modelling of industrial manufacturing systems.

Authors: Ilie-Zudor, E; Monostori, L; Wiendahl, HP; Macchi, M; Longeri, T; Di Mascolo, M
Date: 2002.
Published by: Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium. Intelligent Manufacturing and Automation: Learning from Nature. Vienna (Page: 221-222)

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

Dolinsek, S

An intelligent AE sensor for the monitoring of finish machining process.

Authors: Dolinsek, S; Kopac, J; Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 2. (Page: 847-853)

Dorronsoro, Pablo

Market power analysis for varied concentration in a first-price auction based multiagent supply chain.

Authors: Dorronsoro, Pablo; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 392-402.)

Drótos, Márton

Real-time, cooperative enterprises: Results of an industry - academia project.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 8-12.)

Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 11-15.)

Döring, S.

Complexity-based modeling of reconfigurable collaborations in production industry.

Authors: Schuh, G.; Monostori, László; Csáji, Balázs Csanád; Döring, S.
Date: 2008.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 57, Issue no.: 1, Page: 445-450.)

Egresits, C

Knowledge-based hybrid techniques combined with simulation: application to robust manufacturing systems. (Computer techniques.)

Authors: Mezgár, I; Monostori, L; Kádár, B; Egresits, C
Date: 2000.
Published by: Knowledge-based systems. Techniques and Applications. Vol. 3. (Page: 755-790)

On the application of hybrid AI techniques in manufacturing

Authors: Monostori, L; Egresits, C; Zsoldos, L
Date: 1994.
Published by: microCAD'94. International computer science conference. Miskolc, 1994 (Page: 15-22)

Modelling and monitoring of milling through neuro-fuzzy techniques

Authors: Monostori, L; Egresits, C
Date: 1994.
Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 381-386)

NEURECA: an object oriented system under Windows for ANN based monitoring and control of industrial processes

Authors: Egresits, C; Monostori, L
Date: 1994.
Published by: 5th international DAAAM symposium. Maribor, 1994 (Page: 113-114)

Egresits, CS

Mesterséges intelligencia alkalmazások a gépipari folyamat felügyeletben. (Artificial intelligence applications in monitoring of manufacturing processes.)

Authors: Monostori, L; Egresits, CS
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 53-75)

Alapvető mesterséges intelligencia technikák. (Fundamental artificial intelligence techniques.)

Authors: Váncza, J; Monostori, L; Egresits, CS
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 1-27)

Soft computing and hybrid AI approaches to intelligent manufacturing.

Authors: Monostori, L; Hornyák, J; Egresits, CS; Viharos, ZSJ
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applications of artificial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol. 2. (Lecture) (Page: 765-774)

Multistrategy learning approaches to generate and tune fuzzy control structures and their application in manufacturing.

Authors: Egresits, CS; Monostori, L; Hornyák, J
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 4, Page: 323-329)

ANN and hybrid AI approaches to financial and business problems.

Authors: Monostori, L; Hornyák, J; Egresits, CS
Date: 1997.
Published by: NEURAL NETWORK WORLD (Volume no.: 7, Issue no.: 4-5, Page: 495-506)

On hybrid learning and its application in intelligent manufacturing.

Authors: Monostori, L; Egresits, CS
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 111-117)

Felügyeleti és diagnosztikai rendszerek.

Authors: Monostori, L; Egresits, CS
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 316-348)

Multistrategy learning approaches to generate and tune fuzzy control structures and their applications in manufacturing.

Authors: Egresits, CS; Monostori, L; Hornyák, J
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 88-94)

Genetic algorithms for automatic design of fuzzy decision systems for intelligent manufacturing.

Authors: Egresits, CS; Monostori, L
Date: 1997.
Published by: 3rd IFAC symposium on intelligent components and instruments for control applications. SICICA '97. Preprints. Annecy, 1997. (Page: 603-608)

Approaches to coupling connectionist and expert systems in intelligent manufacturing.

Authors: Barschdorff, D; Monostori, L; Wöstenkühler, GW; Egresits, CS; Kádár, B
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 5-15)

Design and real-time reconfiguration of robust manufacturing systems by using design of experiments and artificial neural networks.

Authors: Mezgár, I; Egresits, CS; Monostori, L
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 61-70)

Mesterséges intelligencia módszerek.

Authors: Váncza, J; Monostori, L; Egresits, CS
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 162-237)

Hybrid AI solutions and their application in manufacturing.

Authors: Monostori, L; Egresits, CS; Kádár, B
Date: 1996.
Published by: Industrial and engineering applications of artificial intelligence end expert systems. IEA/AIE 96. Proceedings of the ninth international conference. Fukuoka, 1996. (Page: 469-478)

Generation and tuning of fuzzy control structures using genetic algorithms and neural learning.

Authors: Egresits, CS; Hornyák, J; Monostori, L
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 115-116)

A coupled system for re-engineering of robust manufacturing system configurations.

Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL
Date: 1996.
Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64)

Virtual manufacturing using a hierarchically coupled hybrid AI system

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 369-374)

Virtual manufacturing by coupling connectionist and expert systems

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: 6th international DAAAM symposium. Proceedings. Krakow, 1995. Krakow, Politechnika Krakowska, 1995 (Page: 231-232)

On hybrid learning and its application in intelligent manufacturing

Authors: Monostori, L; Egresits, CS
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 655-670)

Coupling expert systems and artificial neural networks: a hybrid AI solution and its application in manufacturing

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: microCAD' 95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 69-72)

Application of hybrid AI techniques in manufacturing

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: CAMP '95. CAD/CAM and multimedia. 5th international conference and trade show. Budapest, 1995 (Page: 52-62)

HYBEXP: a hierarchically coupled hybrid AI approach to production control

Authors: Kádár, B; Egresits, CS; Monostori, L
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 94-101)

Neuro-fuzzy systems as hybrid AI solutions to diagnostic problems

Authors: Egresits, CS; Monostori, L
Date: 1995.
Published by: Acoustical and vibratory surveillance methods and diagnostic techniques. 2nd international conference. Senlies, 1995 (Page: 817-825)

NEURECA: an ANN based system for monitoring and control of industrial processes

Authors: Egresits, CS; Monostori, L
Date: 1995.
Published by: microCAD'95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 65-68)

Combined structure and parameter learning for control applications

Authors: Egresits, CS; Monostori, L
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 73-80)

Approaches to coupling connectionist and expert systems in intelligent manufacturing

Authors: Barschdorff, D; Monostori, L; Wörstenkühler, GW; Egresits, CS; Kádár, B
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 591-608)

Re-engineering of robust manufacturing system configurations

Authors: Mezgár, I; Egresits, CS; Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 261-280)

Egri, Péter

Real-time, cooperative enterprises: Results of an industry - academia project.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 8-12.)

Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Gábor Ferenc; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 724-731.)

Real-time, cooperative enterprises for customized mass production; challenges and solution approaches.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 13851-13856.)

Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 11-15.)

A coordination mechanism for rolling horizon planning in supply networks.

Authors: Váncza, József; Egri, Péter; Monostori, László
Date: 2008.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 57, Issue no.: 1, Page: 455-458.)

Komplexität der Bedarfsprognosen und ihre Wirkungen in kooperativen Logistiknetzwerken.

Authors: Egri, Péter; Csáji, Balázs Csanád; Kemény, Zsolt; Monostori, László; Váncza, József
Editor: Dangelmaier, W.; Aufenanger, M.; Klöpper, B.
Date: 2008.
Published by: 10. Paderborner Frühjahrstagung. Reagible Unternehmen in dynamischen Märkten. Paderborn, 2008. (Page: 455-469.)

The RFID technology and its current applications

Authors: Ilie-Zudor Angyalka, Elisabeth; Kemény, Zsolt; Egri, Péter; Monostori, László
Editor: Monostori, László; Ilie-Zudor Angyalka, Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 29-36)
Download article: [html], [pdf]

Erdélyi, F

Reinforcement learning for solving shortest-path and dynamic scheduling problems.

Authors: Stefán, P; Monostori, L; Erdélyi, F
Date: 2001.
Published by: Proceedings of the 3rd international workshop on emergent synthesis. IWES'01 Bled, 2001. (Page: 83-88)

Számítástechnika, informatika a gépgyártás-technológiában. (Informatics in manufacturing technology.)

Authors: Erdélyi, F; Horváth, M; Kulcsár, B; Monostori, L; Renner, G; Tóth, T
Department: Geometric Modelling and Computer Vision Laboratory
Date: 2001.
Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 157-186)

Using symbolic and sub-symbolic methods in solving problems difficult to analyze.

Authors: Stefán, P; Monostori, L; Erdélyi, F
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 195-200)

A termelés-informatika fejlődési tendenciái.

Authors: Monostori, L; Kádár, B; Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 505-527)

Erdős , Ferenc Gábor

Real-time, cooperative enterprises for customised mass production.

Authors: Monostori, László; Kis, Tamás; Kádár, Botond; Váncza, József; Erdős , Ferenc Gábor
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Page: 1067-1076. (CD))

Real-time, cooperative enterprises: management of changes and disturbances in different levels of production.

Authors: Monostori, László; Váncza, József; Márkus, András; Kis, Tamás; Kovács, András; Erdős , Ferenc Gábor; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 4, Page: 351-359.)

Erdős, Ferenc Gábor

AI supported maintenance and reliability system in wind energy production.

Authors: Viharos, Zsolt János; Monostori, László; Erdős, Ferenc Gábor; Kovács, András
Date: 2010. 04. 20.
Published by: EWEC 2010. European wind energy conference and exhibition. Warsaw, 2010. (Length: 1-12. page)
Download article: [pdf]

Real-time, cooperative enterprises for customized mass production; challenges and solution approaches.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 13851-13856.)

Erdős, Gábor Ferenc

Scheduling the maintenance of wind farms for minimizing production loss.

Authors: Kovács, András; Erdős, Gábor Ferenc; Monostori, László; Viharos, Zsolt ános
Date: 2011.
Published by: Preprints of the 18th IFAC World Congress. Milano, 2011. (Page: 14802-14807.)

WindMT: An integrated system for failure detection and maintenance scheduling at wind farms.

Authors: Kovács, András; Csempesz, János; Erdős, Gábor Ferenc; Karnok, Dávid; Kemény, Lőrinc; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: ICAPS 2011. 21st international conference on automated planning and scheduling. Proceedings of system demonstrations. Freiburg, 2011. (Page: 46-49.)

Artificial intelligence applications for maintenance oriented health monitoring of wind turbines.

Authors: Viharos, Zsolt János; Erdős, Gábor Ferenc; Kovács, András; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 403-413.)

Digital enterprise solution for integrated production planning and control.

Authors: Monostori, László; Erdős, Gábor Ferenc; Kádár, Botond; Kis, Tamás; Kovács, András; Pfeiffer, András; Váncza, József
Date: 2010.
Published by: Computers in Industry (Volume no.: 61, Issue no.: 2, Page: 112-126.)
Download article: [008]

AI supported maintenance and reliability system in wind energy production.

Authors: Monostori, László; Viharos, Zsolt János; Erdős, Gábor Ferenc; Kovács, András
Editor: Burczynski, T.; Cholewa, W.; Moczulski, W.
Date: 2009.
Published by: AI-METH 2009. Artificial intelligence methods. Symposium proceedings. Gliwice, 2009. (AI-METH series.)

Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Gábor Ferenc; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 724-731.)

Real-time, cooperative enterprises for customised mass production.

Authors: Monostori, László; Kis, Tamás; Váncza, József; Kádár, Botond; Erdős, Gábor Ferenc
Date: 2009.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 22, Issue no.: 1, Page: 55-68.)

Erdős, Gábor

A system for the detailed scheduling of wind farm maintenance.

Authors: Kovács, András; Erdős, Gábor; Viharos, Zsolt János; Monostori, László
Date: 2011.
Published by: CIRP Annals - Manufacturing Technology (Volume no.: 60, Issue no.: 1, Page: 497-501. )

Erdős, P

Real-time, cooperative enterprises: management of changes and disturbances on different levels of production

Authors: Monostori, L; Váncza, J; Márkus, A; Kis, T; Kovács, A; Erdős, P; Kádár, B; Viharos, ZsJ
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Farkas, Zoltán

Real-time, cooperative enterprises: challenges and results of an industry-academia project.

Authors: Monostori, László; Salekovics, István; Váncza, József; Kis, Tamás; Kádár, Botond; Farkas, Zoltán
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 95-100.)

Fazekas, F

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

Filip, F

From plant and logistics control to multi-enterprise collaboration

Authors: Nof, SY; Morel, G; Monostori, László; Molina, A; Filip, F
Date: 2006.
Published by: Annual Reviews in Control (Volume no.: 30, Issue no.: 1, Page: 55-68)

From plant and logistics control to multi-enterprise collaboration

Authors: Nof, SY; Morel, G; Monostori, L; Molina, A; Filip, F
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-14)

Filip, F. G.

Advances in e-manufacturing, e-logistics, and e-service systems.

Authors: Nof, S. Y.; Filip, F. G.; Molina, A.; Monostori, László; Pereira, C. E.
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 5742-5750.)

Fornasiero, R

Organizing and running real-time, cooperative enterprises

Authors: Monostori, L; Fornasiero, R; Váncza, J
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 144-157)

Fornasiero, R.

Organizing and running real-time, co-operative enterprises.

Authors: Monostori, László; Fornasiero, R.; Váncza, József
Editor: Taisch, M.; Thoben, K-D.; Montorio, M.
Date: 2007.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 133-144.)

Fraemling, K

Identity-based tracking of products and product data in changing networks

Authors: Ilie-Zudor, Angyalka Elisabeth; Fraemling, K; Holstrom, J; Monostori, László
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 15-22)
Download article: [pdf]

Frein, Y

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Garetti, M

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Glöckner, H.

Quantifiable closed quality control (QC2).

Authors: Viharos, Zsolt János; Monostori, László; Schmitt, R.; Glöckner, H.; Stiller, S.; Markos, S.
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 25-33.)

Designing closed quality control loops for stable production systems

Authors: Schmitt, R.; Glöckner, H.; Stiller, S.; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: 55th EOQ Congress as World Quality Congress "Navigating Global Quality in a New Era". Budapest, 2011. (Length: paper nr.: 11.1.3. page)

Gullander, P

Shop floor control architectures for the extended enterprise.

Authors: Janusz, B; Bongaerts, L; Gullander, P; Klingstam, P; Monostori, L; Jordan, P
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-2)

Gödri, I

Simulation and novel control techniques for re-engineering purposes.

Authors: Gödri, I; Monostori, L
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 403-408)

An integrated approach to design, manufacturing and assembly/disassembly.

Authors: Gödri, I; Monostori, L
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 125-126)

Haidegger, G

Digital factories, production networks.

Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ
Date: 2002.
Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54)

Digital enterprises: A national R&D project in Hungary.

Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ
Date: 2002.
Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272)

Holstrom, J

Identity-based tracking of products and product data in changing networks

Authors: Ilie-Zudor, Angyalka Elisabeth; Fraemling, K; Holstrom, J; Monostori, László
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 15-22)
Download article: [pdf]

Hornyák, J

Genetic programming for feature extraction in financial forecasting.

Authors: Hornyák, J; Monostori, L
Date: 1999.
Published by: ERCIM NEWS (Volume no.: 38, Page: 10-11)

Management of changes and disturbances in production systems.

Authors: Monostori, L; Kádár, B; Hornyák, J
Date: 1998.
Published by: LSS '98 Large scale systems: theory and applications. 8th IFAC/IFORS/IMACS/IFIP symposium. Preprints. Rio Patras, 1998. Vol. 1. (Page: 313-318)

Approaches to managing changes and uncertainties in manufacturing.

Authors: Monostori, L; Kádár, B; Hornyák, J
Date: 1998.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 47, Issue no.: 1, Page: 365-368)

Novel approaches to production planning and control.

Authors: Monostori, L; Hornyák, J; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems. Lausanne, 1998 (Page: 115-132)

Soft computing and hybrid AI approaches to intelligent manufacturing.

Authors: Monostori, L; Hornyák, J; Egresits, CS; Viharos, ZSJ
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applications of artificial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol. 2. (Lecture) (Page: 765-774)

Genetic algorithms for predictive and reactive scheduling in manufacturing systems.

Authors: Hornyák, J; Monostori, L
Date: 1998.
Published by: ICME 98. CIRP international seminar on intelligent computation in manufacturing engineering. Proceedings. Capri, 1998. (Page: 213-220)

Multistrategy learning approaches to generate and tune fuzzy control structures and their application in manufacturing.

Authors: Egresits, CS; Monostori, L; Hornyák, J
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 4, Page: 323-329)

ANN and hybrid AI approaches to financial and business problems.

Authors: Monostori, L; Hornyák, J; Egresits, CS
Date: 1997.
Published by: NEURAL NETWORK WORLD (Volume no.: 7, Issue no.: 4-5, Page: 495-506)

A feature extraction technique for ANN-based financial forecasting.

Authors: Hornyák, J; Monostori, L
Date: 1997.
Published by: NEURAL NETWORK WORLD (Volume no.: 7, Issue no.: 4-5, Page: 543-552)

Multistrategy learning approaches to generate and tune fuzzy control structures and their applications in manufacturing.

Authors: Egresits, CS; Monostori, L; Hornyák, J
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 88-94)

Generation and tuning of fuzzy control structures using genetic algorithms and neural learning.

Authors: Egresits, CS; Hornyák, J; Monostori, L
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 115-116)

Horváth, M

Számítástechnika, informatika a gépgyártás-technológiában. (Informatics in manufacturing technology.)

Authors: Erdélyi, F; Horváth, M; Kulcsár, B; Monostori, L; Renner, G; Tóth, T
Department: Geometric Modelling and Computer Vision Laboratory
Date: 2001.
Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 157-186)

Ilie Zudor, E

Constraint programming based support for production networks management

Authors: Ilie Zudor, E; Monostori, L; Kuzmina, E
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 13-18)

Constraint programming based support for production networks management

Authors: Ilie Zudor, E; Monostori, L; Kuzmina, E
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 11-16)

Environmental and life cycle issues in holonic manufacturing

Authors: Monostori, L; Ilie Zudor, E
Date: 2002.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 31, Issue no.: 3, Page: 209-214)

New manufacturing paradigms.

Authors: Ilie Zudor, E; Monostori, L
Date: 2000.
Published by: Analele Universitatii din Oradea. Fasc. Mecanica. Sect. Technologii in Constructia de Masini. (Page: 357-362)

Environmental and life cycle issues in holonic manufacturing.

Authors: Monostori, L; Ilie Zudor, E
Date: 2000.
Published by: The 33rd CIRP international seminar on manufacturing systems. Proceedings. Stockholm, 2000. (Page: 176-181)

Environmental and life cycle issues in agent-based manufacturing.

Authors: Ilie Zudor, E; Monostori, L
Date: 2000.
Published by: ERCIM NEWS (Issue no.: 42, Page: 33-34)

Ilie-Zudor Angyalka, Elisabeth

The RFID technology and its current applications

Authors: Ilie-Zudor Angyalka, Elisabeth; Kemény, Zsolt; Egri, Péter; Monostori, László
Editor: Monostori, László; Ilie-Zudor Angyalka, Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 29-36)
Download article: [html], [pdf]

Ilie-Zudor, A

Extended enterprise - Basic concepts, enabling information technologies, open questions.

Authors: Liszka, L; Kádár, B; Monostori, L; Ilie-Zudor, A
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 41-46)

Incorporation of environmental issues in production control.

Authors: Ilie-Zudor, A; Monostori, L
Date: 1999.
Published by: Annals of DAAAM for 1999 and proceedings of the 10th international DAAAM symposium "intelligent manufacturing and automation: past - present - future". Vienna, 1999. (Page: 209-210)

An environmentally benign approach to agent-based manufacturing.

Authors: Ilie-Zudor, A; Monostori, L
Date: 1999.
Published by: MAS'99. 1st IFAC workshop on multi-agent-systems in production. Preprints. Vienna, 1999. (Page: 191-195)

Evaluation and compare of novel production paradigms and their control architectures.

Authors: Ilie-Zudor, A; Monostori, L; Kádár, B; Liszka, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 151-156)

Ilie-Zudor, A

Agent-based product life cycle data support

Authors: Niemann, J; Ilie-Zudor, A; Monostori, L; Westkämper, E
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 105-110)
Download article: [pdf]

Web-based education on graduate level within corporations in the field of supply-chain management

Authors: Ilie-Zudor, A; Kimmich, J; Monostori, L
Date: 2005.
Published by: Proceedings of the 5th WSEAS international conference on distance learning and web engineering. Corfu, 2005. (Page: 65-70)

eSCM: education on supply-chain management on graduate level and within corporations

Authors: Ilie-Zudor, A; Pinto, R; Macchi, M; Monostori, L
Date: 2005.
Published by: WSEAS TRANSACTIONS ON ADVANCES IN ENGINEERING EDUCATION (Volume no.: 2, Issue no.: 2, Page: 66-73)
Download article: [pdf]

E-learning in the field of supply-chain management on graduate level and within corporations

Authors: Ilie-Zudor, A; Monostori, L
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Ilie-Zudor, Angyalka Elisabeth

Novel IT solutions for increasing transparency in production and in supply chains.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kádár, Botond; Karnok, Dávid; Pfeiffer, András; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2011. 07. 31.
Published by: ICPR 21. 1st international conference on production research. Innovation in product and production. Stuttgart, 2011. (Length: 1-6. page)

Engineering education on supply-chain management for students and for employees in industry.

Authors: Ilie-Zudor, Angyalka Elisabeth; Macchi, M.; Monostori, László; Scotti, S.; Kemény, Zsolt
Date: 2011.
Published by: Computer Applications in Engineering Education (Volume no.: 19, Issue no.: 1, Page: 81-88.)
Download article: [html]

A survey of applications and requirements of unique identification systems and RFID techniques.

Authors: Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; van Blommestein, F.; Monostori, László; van der Meulen, A.
Date: 2011.
Published by: Computers in Industry (Volume no.: 62, Issue no.: 3, Page: 227-252.)

Towards adaptive and digital manufacturing.

Authors: Monostori, László; Csáji, Balázs Csanád; Kádár, Botond; Pfeiffer, András; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2010. 04.
Published by: Annual Reviews in Control (Volume no.: 34, Issue no.: 1, Page: 118-128.)
Download article: [007], [html]

Increased transparency within and beyond organizational borders by novel identifier-based services for enterprises of different size.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc; Karnok, Dávid
Date: 2009.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 58, Issue no.: 1, Page: 417-420.)
Download article: [pdf]

From tracking operations to IOT - The small business perspective.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Editor: Grau, A.; Campos, J.; Oliver, G.
Date: 2009.
Published by: ETFA 2009. 14th IEEE international conference on emerging technologies and factory automation. Palma de Mallorca, 2009. (Page: 1-8. (CD))
Download article: [pdf]

Agent-based framework for pre-contractual evaluation of participants in project-delivery supply-chains.

Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2009.
Published by: Assembly Automation (Volume no.: 29, Issue no.: 2, Page: 137-153.)

A low-cost perspective in identifier-based services of supply chains.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László; Langius, Erik A. F.
Date: 2008.
Published by: EFTA 2008. 13th IEEE international conference on emerging technologies and factory automation. Hamburg, 2008. (Page: 1338-1345.)

Identity-based, item-centric tracking platform for logistics applications.

Authors: Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Kemény, Zsolt; Karnok, Dávid; Monostori, László
Date: 2008.
Published by: HMS 2008. International workshop on harbour, martime and multimodal logistics modeling and simulation. Campora S. Giovanni, 2008. (Page: 10-19. (CD))
Download article: [pdf]

TraSer: an open-source solution platform for cross-company transparency in tracking and tracing.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 4493-4498.)

Identity-based tracking and Web services for SMEs.

Authors: Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Monostori, László
Editor: Blecker, Thorsten; Huang, George Q.
Date: 2008.
Published by: RFID in operations and supply chain management. Research and applications. (Operations and technology management 6.) (Page: 119-147.)

Agent-based approach for building-up efficient value chain networks

Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 3, Page: 243-256)

Identity-based tracking of products and product data in changing networks

Authors: Ilie-Zudor, Angyalka Elisabeth; Fraemling, K; Holstrom, J; Monostori, László
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 15-22)
Download article: [pdf]

Agent-based approach for building-up efficient value chain networks

Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Editor: Butala, P
Date: 2006.
Published by: 39th CIRP international seminar on manufacturing systems. The morphology of innovative manufacturing systems. Ljubljana, 2006. (Page: 45-54)

Ilie-Zudor, E

Agent-based product life cycle data support

Authors: Niemann, J; Ilie-Zudor, E; Monostori, L; Westkamper, E
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 103-108)

An international platform for education and research in the area of modelling of industrial manufacturing systems.

Authors: Ilie-Zudor, E; Monostori, L; Wiendahl, HP; Macchi, M; Longeri, T; Di Mascolo, M
Date: 2002.
Published by: Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium. Intelligent Manufacturing and Automation: Learning from Nature. Vienna (Page: 221-222)

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Teaching manufacturing systems modelling through simulation in an international platform for education and research.

Authors: Ilie-Zudor, E; Monostori, L; Macchi, M; Kádár, B; Kuzmina, E
Date: 2002.
Published by: Proceedings of the 4th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises. MITIP 2002. Savona (Page: 41-46)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

An agent-based approach for production control incorporating environmental and life-cycle issues, together with sensitivity analysis.

Authors: Ilie-Zudor, E; Monostori, L
Date: 2002.
Published by: Developments in Applied Artificial Intelligence. 15th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems. IEA/AIE 2002. Cairns, 2002. (Lecture notes in computer science 2358) (Page: 157-167)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

Modelling and management of production networks.

Authors: Ilie-Zudor, E; Monostori, L
Date: 2001.
Published by: Digital enterprise challenges. Life-cycle approach to management and production. (Page: 60-71)

Agent-based support for handling environmental and life-cycle issues.

Authors: Ilie-Zudor, E; Monostori, L
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence 2070.) (Page: 812-820)

Ilie-Zudor, Elisabeth

AutoID-based track and trace applications in supply-chains - state-of-the-art and envisaged developments.

Authors: Kemény, Zsolt; Ilie-Zudor, Elisabeth; Monostori, László; Szathmári , Marcell Ferenc
Date: 2007.
Published by: 40th CIRP international seminar on manufacturing systems. Liverpool, 2007. (Page: 1-8. (CD))

Iung, B

Production scheduling and control

Authors: Iung, B; Monostori, L
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 127-128)

Manufacturing scheduling and control in the extended enterprise

Authors: Iung, B; Monostori, L
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 129-143)

Iung, B.

Manufacturing scheduling and control in the extended enterprise.

Authors: Monostori, László; Iung, B.
Editor: Taisch, M.
Date: 2007.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 119-132.)

Janusz, B

Shop floor control architectures for the extended enterprise.

Authors: Janusz, B; Bongaerts, L; Gullander, P; Klingstam, P; Monostori, L; Jordan, P
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-2)

Jordan, P

Shop floor control architectures for the extended enterprise.

Authors: Janusz, B; Bongaerts, L; Gullander, P; Klingstam, P; Monostori, L; Jordan, P
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-2)

Kals, HJJ

Emergent synthesis methodologies for manufacturing.

Authors: Ueda, K; Márkus, A; Monostori, L; Kals, HJJ; Arai, T
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 50, Issue no.: 2, Page: 535-551)

Karnok, Dávid

Novel IT solutions for increasing transparency in production and in supply chains.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kádár, Botond; Karnok, Dávid; Pfeiffer, András; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2011. 07. 31.
Published by: ICPR 21. 1st international conference on production research. Innovation in product and production. Stuttgart, 2011. (Length: 1-6. page)

WindMT: An integrated system for failure detection and maintenance scheduling at wind farms.

Authors: Kovács, András; Csempesz, János; Erdős, Gábor Ferenc; Karnok, Dávid; Kemény, Lőrinc; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: ICAPS 2011. 21st international conference on automated planning and scheduling. Proceedings of system demonstrations. Freiburg, 2011. (Page: 46-49.)

Extracting process time information from large-scale noisy manufacturing event logs.

Authors: Karnok, Dávid; Monostori, László
Date: 2011.
Published by: 44th CIRP conference on manufacturing systems. Madison, 2011. (Length: Paper No. 37., 1-6. page)

Determination of routings and process time information from event logs.

Authors: Karnok, Dávid; Monostori, László
Date: 2011. 08. 29.
Published by: Preprints of the 18th IFAC World Congress. Milano, 2011. (Page: 14055-14060.)

Routing model refinement in large-scale manufacturing environment by using data mining.

Authors: Karnok, Dávid; Monostori, László
Editor: Sihn, W.; Kuhlang, P.
Date: 2010. 05. 26.
Published by: 43rd CIRP international conference on manufacturing systems. Sustainable production and logistics in global networks. Proceedings. Vienna, 2010. (Page: 725-734.)

Novel approaches for better transparency in large-scale manufacturing environment by using process mining.

Authors: Karnok, Dávid; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 97-106.)

Real-time, cooperative enterprises: Results of an industry - academia project.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 8-12.)

Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Gábor Ferenc; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 724-731.)

Increased transparency within and beyond organizational borders by novel identifier-based services for enterprises of different size.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc; Karnok, Dávid
Date: 2009.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 58, Issue no.: 1, Page: 417-420.)
Download article: [pdf]

Novel approaches for better transparency in production and supply chains.

Authors: Karnok, Dávid; Monostori, László
Date: 2009.
Published by: 42nd CIRP conference on manufacturing systems. Sustainable development of manufacturing systems. Grenoble, 2009. (Page: 1-8. (CD))

Identity-based, item-centric tracking platform for logistics applications.

Authors: Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Kemény, Zsolt; Karnok, Dávid; Monostori, László
Date: 2008.
Published by: HMS 2008. International workshop on harbour, martime and multimodal logistics modeling and simulation. Campora S. Giovanni, 2008. (Page: 10-19. (CD))
Download article: [pdf]

Logistics platform: developing a distributed, cooperative production and logistics system.

Authors: Karnok, Dávid; Monostori, László
Date: 2008.
Published by: Gépészet 2008. Proceedings of 6th conference on mechanical engineering. Budapest, 2008. (Length: 1-12. (CD) page)

Digital manager: developing a support system for real-time production evaluation.

Authors: Karnok, Dávid; Monostori, László
Date: 2008.
Published by: Gépészet 2008. Proceedings of 6th conference on mechanical engineering. Budapest, 2008. (Length: 1-12. (CD) page)

Real-time, cooperative enterprises for customized mass production; challenges and solution approaches.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 13851-13856.)

Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 11-15.)

Simulation as one of the core technologies for digital enterprises: assessment of hybrid rescheduling methods.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Date: 2008.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 21, Issue no.: 2, Page: 206-214.)
Download article: [html]

Solution approaches to real-time control of customized mass production.

Authors: Monostori, László; Kádár, Botond; Pfeiffer, András; Karnok, Dávid
Date: 2007.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 56, Issue no.: 1, Page: 431-434.)
Download article: [103]

Simulating the manufacturing execution system: interactions with the workers and managers.

Authors: Karnok, Dávid; Kádár, Botond; Monostori, László
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Length: 313-321. (CD) page)

Integration of production-, quality- and process monitoring for agile manufacturing

Authors: Viharos, Zsolt János; Kádár, Botond; Monostori, László; Kemény, Zsolt; Csáji, Balázs Csanád; Pfeiffer, András; Karnok, Dávid
Date: 2006.
Published by: XVIII IMEKO world congress. Metrology for a sustainable development. Proceedings. Rio de Janeiro, 2006. (Page: 1-6)

Simulation-based control strategy optimization by using genetic algorithms

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 469-474)

Simulating the interaction between the shop floor personnel and the manufacturing execution system

Authors: Karnok, Dávid; Monostori, László; Kádár, Botond
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 457-462)

Simulation as one of the core technologies for digital enterprises; assessment of hybrid rescheduling methods

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Editor: Cunha, PF
Date: 2006.
Published by: DET 2006. Proceedings of the 3rd CIRP sponsored conference in digital enterprise technology. Setúbal, 2006. (Page: 1-8)

Kemény, Lőrinc

WindMT: An integrated system for failure detection and maintenance scheduling at wind farms.

Authors: Kovács, András; Csempesz, János; Erdős, Gábor Ferenc; Karnok, Dávid; Kemény, Lőrinc; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: ICAPS 2011. 21st international conference on automated planning and scheduling. Proceedings of system demonstrations. Freiburg, 2011. (Page: 46-49.)

Kemény, Zsolt

Novel IT solutions for increasing transparency in production and in supply chains.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kádár, Botond; Karnok, Dávid; Pfeiffer, András; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2011. 07. 31.
Published by: ICPR 21. 1st international conference on production research. Innovation in product and production. Stuttgart, 2011. (Length: 1-6. page)

Engineering education on supply-chain management for students and for employees in industry.

Authors: Ilie-Zudor, Angyalka Elisabeth; Macchi, M.; Monostori, László; Scotti, S.; Kemény, Zsolt
Date: 2011.
Published by: Computer Applications in Engineering Education (Volume no.: 19, Issue no.: 1, Page: 81-88.)
Download article: [html]

A survey of applications and requirements of unique identification systems and RFID techniques.

Authors: Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; van Blommestein, F.; Monostori, László; van der Meulen, A.
Date: 2011.
Published by: Computers in Industry (Volume no.: 62, Issue no.: 3, Page: 227-252.)

Towards adaptive and digital manufacturing.

Authors: Monostori, László; Csáji, Balázs Csanád; Kádár, Botond; Pfeiffer, András; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2010. 04.
Published by: Annual Reviews in Control (Volume no.: 34, Issue no.: 1, Page: 118-128.)
Download article: [007], [html]

Increased transparency within and beyond organizational borders by novel identifier-based services for enterprises of different size.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc; Karnok, Dávid
Date: 2009.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 58, Issue no.: 1, Page: 417-420.)
Download article: [pdf]

From tracking operations to IOT - The small business perspective.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Editor: Grau, A.; Campos, J.; Oliver, G.
Date: 2009.
Published by: ETFA 2009. 14th IEEE international conference on emerging technologies and factory automation. Palma de Mallorca, 2009. (Page: 1-8. (CD))
Download article: [pdf]

A low-cost perspective in identifier-based services of supply chains.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László; Langius, Erik A. F.
Date: 2008.
Published by: EFTA 2008. 13th IEEE international conference on emerging technologies and factory automation. Hamburg, 2008. (Page: 1338-1345.)

Identity-based, item-centric tracking platform for logistics applications.

Authors: Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Kemény, Zsolt; Karnok, Dávid; Monostori, László
Date: 2008.
Published by: HMS 2008. International workshop on harbour, martime and multimodal logistics modeling and simulation. Campora S. Giovanni, 2008. (Page: 10-19. (CD))
Download article: [pdf]

TraSer: an open-source solution platform for cross-company transparency in tracking and tracing.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 4493-4498.)

Komplexität der Bedarfsprognosen und ihre Wirkungen in kooperativen Logistiknetzwerken.

Authors: Egri, Péter; Csáji, Balázs Csanád; Kemény, Zsolt; Monostori, László; Váncza, József
Editor: Dangelmaier, W.; Aufenanger, M.; Klöpper, B.
Date: 2008.
Published by: 10. Paderborner Frühjahrstagung. Reagible Unternehmen in dynamischen Märkten. Paderborn, 2008. (Page: 455-469.)

Automatic partitioning of problems through submodel decomposition - a promising technique of digital enterprise technology.

Authors: Viharos, Zsolt János; Monostori, László; Kemény, Zsolt
Editor: Cunha, P.F.; Maropoulos, P.G.
Date: 2007.
Published by: Digital enterprise technology. Perspective and future challenges. (Page: 165-173.)

Identity-based tracking and Web services for SMEs.

Authors: Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Monostori, László
Editor: Blecker, Thorsten; Huang, George Q.
Date: 2008.
Published by: RFID in operations and supply chain management. Research and applications. (Operations and technology management 6.) (Page: 119-147.)

AutoID-based track and trace applications in supply-chains - state-of-the-art and envisaged developments.

Authors: Kemény, Zsolt; Ilie-Zudor, Elisabeth; Monostori, László; Szathmári , Marcell Ferenc
Date: 2007.
Published by: 40th CIRP international seminar on manufacturing systems. Liverpool, 2007. (Page: 1-8. (CD))

Automatic partitioning of problems through submodel decomposition - a promising technique of digital enterprise technology

Authors: Viharos, Zsolt János; Monostori, László; Kemény, Zsolt
Editor: Cunha, PF
Date: 2006.
Published by: DET 2006. Proceedings of the 3rd CIRP sponsored conference in digital enterprise technology. Setúbal, 2006. (Page: 1-9)

Integration of production-, quality- and process monitoring for agile manufacturing

Authors: Viharos, Zsolt János; Kádár, Botond; Monostori, László; Kemény, Zsolt; Csáji, Balázs Csanád; Pfeiffer, András; Karnok, Dávid
Date: 2006.
Published by: XVIII IMEKO world congress. Metrology for a sustainable development. Proceedings. Rio de Janeiro, 2006. (Page: 1-6)

The RFID technology and its current applications

Authors: Ilie-Zudor Angyalka, Elisabeth; Kemény, Zsolt; Egri, Péter; Monostori, László
Editor: Monostori, László; Ilie-Zudor Angyalka, Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 29-36)
Download article: [html], [pdf]

Kenderesy, T

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

Monitoring parameter based determination of production tolerances.

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Kenderesy, T; Csongrádi, Z; Koródi, T
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 574-578)

Kimmich, J

Web-based education on graduate level within corporations in the field of supply-chain management

Authors: Ilie-Zudor, A; Kimmich, J; Monostori, L
Date: 2005.
Published by: Proceedings of the 5th WSEAS international conference on distance learning and web engineering. Corfu, 2005. (Page: 65-70)

Kis, T

A market approach to holonic manufacturing.

Authors: Márkus, A; Kis, T; Váncza, J; Monostori, L
Date: 1996.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 45, Issue no.: 1, Page: 433-436)

Kis, T

Real-time, cooperative enterprises: management of changes and disturbances on different levels of production

Authors: Monostori, L; Váncza, J; Márkus, A; Kis, T; Kovács, A; Erdős, P; Kádár, B; Viharos, ZsJ
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Kis, Tamás

Digital enterprise solution for integrated production planning and control.

Authors: Monostori, László; Erdős, Gábor Ferenc; Kádár, Botond; Kis, Tamás; Kovács, András; Pfeiffer, András; Váncza, József
Date: 2010.
Published by: Computers in Industry (Volume no.: 61, Issue no.: 2, Page: 112-126.)
Download article: [008]

Real-time, cooperative enterprises: Results of an industry - academia project.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 8-12.)

Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Gábor Ferenc; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 724-731.)

Real-time, cooperative enterprises for customised mass production.

Authors: Monostori, László; Kis, Tamás; Váncza, József; Kádár, Botond; Erdős, Gábor Ferenc
Date: 2009.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 22, Issue no.: 1, Page: 55-68.)

Real-time, cooperative enterprises for customized mass production; challenges and solution approaches.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 13851-13856.)

Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 11-15.)

Real-time, cooperative enterprises: challenges and results of an industry-academia project.

Authors: Monostori, László; Salekovics, István; Váncza, József; Kis, Tamás; Kádár, Botond; Farkas, Zoltán
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 95-100.)

Real-time, cooperative enterprises for customised mass production.

Authors: Monostori, László; Kis, Tamás; Kádár, Botond; Váncza, József; Erdős , Ferenc Gábor
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Page: 1067-1076. (CD))

Real-time, cooperative enterprises: requirements and solution approaches

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Dolgui, A
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 1. (Page: 561-566)

Real-time, cooperative enterprises: requirements and solution approaches

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Preprints. Vol. 1. Saint-Etienne, 2006. (Page: 591-596)

Real-time, cooperative enterprises

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 1-8)

Real-time, cooperative enterprises: management of changes and disturbances in different levels of production.

Authors: Monostori, László; Váncza, József; Márkus, András; Kis, Tamás; Kovács, András; Erdős , Ferenc Gábor; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 4, Page: 351-359.)

Klingstam, P

Shop floor control architectures for the extended enterprise.

Authors: Janusz, B; Bongaerts, L; Gullander, P; Klingstam, P; Monostori, L; Jordan, P
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-2)

Kopac, J

An intelligent AE sensor for the monitoring of finish machining process.

Authors: Dolinsek, S; Kopac, J; Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 2. (Page: 847-853)

Koródi, T

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

Monitoring parameter based determination of production tolerances.

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Kenderesy, T; Csongrádi, Z; Koródi, T
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 574-578)

Kottenstede, T

Wear estimation and state classification of cutting tools in turning via artificial neural networks

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1993.
Published by: International conference on fault diagnosis (TOOLDIAG'93) Toulouse 1993. Proceedings (Page: 669-677)

Cutting tool monitoring in turning under varying cutting conditions; an artificial neural network approach

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1993.
Published by: Industrial and engineering applications of artificial intelligence and expert systems (IEA/AIE 93) Proceedings of the sixth international conference, Edinburgh, 1993 (Page: 353-359)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik

Authors: Kottenstede, T; Monostori, L; Müller, M; Rosenberger, U
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik (Page: 34)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik (Page: 100)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)

Authors: Barschdorff, D; Monostori, L; Aron, R; Bothe, A; Kottenstede, T; Wöstenkühler, W
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.) (Page: 21)

Kovács, A

Real-life scheduling using constraint programming and simulation

Authors: Kovács, A; Váncza, J; Kádár, B; Monostori, L; Pfeifer, A
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 213-218)

Kovács, A

Real-time, cooperative enterprises: management of changes and disturbances on different levels of production

Authors: Monostori, L; Váncza, J; Márkus, A; Kis, T; Kovács, A; Erdős, P; Kádár, B; Viharos, ZsJ
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Kovács, András

Scheduling the maintenance of wind farms for minimizing production loss.

Authors: Kovács, András; Erdős, Gábor Ferenc; Monostori, László; Viharos, Zsolt ános
Date: 2011.
Published by: Preprints of the 18th IFAC World Congress. Milano, 2011. (Page: 14802-14807.)

WindMT: An integrated system for failure detection and maintenance scheduling at wind farms.

Authors: Kovács, András; Csempesz, János; Erdős, Gábor Ferenc; Karnok, Dávid; Kemény, Lőrinc; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: ICAPS 2011. 21st international conference on automated planning and scheduling. Proceedings of system demonstrations. Freiburg, 2011. (Page: 46-49.)

A system for the detailed scheduling of wind farm maintenance.

Authors: Kovács, András; Erdős, Gábor; Viharos, Zsolt János; Monostori, László
Date: 2011.
Published by: CIRP Annals - Manufacturing Technology (Volume no.: 60, Issue no.: 1, Page: 497-501. )

Artificial intelligence applications for maintenance oriented health monitoring of wind turbines.

Authors: Viharos, Zsolt János; Erdős, Gábor Ferenc; Kovács, András; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 403-413.)

AI supported maintenance and reliability system in wind energy production.

Authors: Viharos, Zsolt János; Monostori, László; Erdős, Ferenc Gábor; Kovács, András
Date: 2010. 04. 20.
Published by: EWEC 2010. European wind energy conference and exhibition. Warsaw, 2010. (Length: 1-12. page)
Download article: [pdf]

Digital enterprise solution for integrated production planning and control.

Authors: Monostori, László; Erdős, Gábor Ferenc; Kádár, Botond; Kis, Tamás; Kovács, András; Pfeiffer, András; Váncza, József
Date: 2010.
Published by: Computers in Industry (Volume no.: 61, Issue no.: 2, Page: 112-126.)
Download article: [008]

AI supported maintenance and reliability system in wind energy production.

Authors: Monostori, László; Viharos, Zsolt János; Erdős, Gábor Ferenc; Kovács, András
Editor: Burczynski, T.; Cholewa, W.; Moczulski, W.
Date: 2009.
Published by: AI-METH 2009. Artificial intelligence methods. Symposium proceedings. Gliwice, 2009. (AI-METH series.)

Real-time, cooperative enterprises: management of changes and disturbances in different levels of production.

Authors: Monostori, László; Váncza, József; Márkus, András; Kis, Tamás; Kovács, András; Erdős , Ferenc Gábor; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 4, Page: 351-359.)

Kovács, GL

A coupled system for re-engineering of robust manufacturing system configurations.

Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL
Date: 1996.
Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64)

Krämer, S

Neural networks for modelling and monitoring of manufacturing processes; milling

Authors: Monostori, L; Markos, S; Krämer, S; Nacsa, J; Szöllősi, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Proceedings of the 8th IMEKO Symposium on Technical Diagnostics Dresden, 1992 (Page: 502-512)

Kulcsár, B

Számítástechnika, informatika a gépgyártás-technológiában. (Informatics in manufacturing technology.)

Authors: Erdélyi, F; Horváth, M; Kulcsár, B; Monostori, L; Renner, G; Tóth, T
Department: Geometric Modelling and Computer Vision Laboratory
Date: 2001.
Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 157-186)

Kumara, S.R.

Cooperative and responsive manufacturing enterprises.

Authors: Váncza, József; Monostori, László; Lutters, D.; Kumara, S.R.; Tseng, M.; Valckenaers, P.; Van Brussel, H.
Date: 2011.
Published by: CIRP Annals - Manufacturing Technology (Volume no.: 60, Issue no.: 2, Page: 797-820. )

Kumara, SRT

Agent-based systems for manufacturing

Authors: Monostori, László; Váncza, József; Kumara, SRT
Date: 2006.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 55, Issue no.: 2, Page: 697-720)

Kuzmina, E

Constraint programming based support for production networks management

Authors: Ilie Zudor, E; Monostori, L; Kuzmina, E
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 13-18)

Constraint programming based support for production networks management

Authors: Ilie Zudor, E; Monostori, L; Kuzmina, E
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 11-16)

Teaching manufacturing systems modelling through simulation in an international platform for education and research.

Authors: Ilie-Zudor, E; Monostori, L; Macchi, M; Kádár, B; Kuzmina, E
Date: 2002.
Published by: Proceedings of the 4th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises. MITIP 2002. Savona (Page: 41-46)

Kádár, B

Simulation supported analysis of a dynamic rescheduling system

Authors: Pfeiffer, A; Kádár, B; Csáji, B; Monostori, L
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 25-30)

Real-time, cooperative enterprises: management of changes and disturbances on different levels of production

Authors: Monostori, L; Váncza, J; Márkus, A; Kis, T; Kovács, A; Erdős, P; Kádár, B; Viharos, ZsJ
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Building agent-based systems in a discrete-event simulation environment

Authors: Kádár, B; Pfeiffer, A; Monostori, L
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3690, Page: 595-599)

Adaptive approaches to increasing the performance of production control systems

Authors: Kádár, B; Csáji, B; Monostori, L
Date: 2005.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 34, Issue no.: 1, Page: 33-43)

Simulation support for rescheduling

Authors: Pfeiffer, A; Kádár, B; Monostori, L
Date: 2004.
Published by: Simulation in Industry. Proceedings of the 16th European Simulation Symposium (ESS 2004) Budapest (Page: 41-46)

Simulation supported analysis of a dynamic rescheduling system

Authors: Pfeiffer, A; Kádár, B; Csáji, B; Monostori, L
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 24-29)

Adaptation and learning in distributed production control

Authors: Monostori, L; Csáji, B; Kádár, B
Date: 2004.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 53, Issue no.: 1, Page: 349-352)

Testing and validation of deterministic schedules in a simulated stochastic environment

Authors: Kádár, B; Pfeiffer, A; Monostori, L
Date: 2004.
Published by: Information Control Problems in Manufacturing. Proceedings of the 11th IFAC symposium INCOM 2004, Salvador (Page: 6 pages)

Discrete event simulation for supporting production planning and scheduling decisions in digital factories

Authors: Kádár, B; Pfeiffer, A; Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 441-448)

Simulation supported agent-based adaptive production scheduling

Authors: Csáji, B; Kádár, B; Monostori, L; Pfeiffer, A
Date: 2004.
Published by: Global Challenges in Manufacturing. Proceedings of the International IMS Forum 2004. Cernobbio, Part 1. (Page: 658-665)

Learning and cooperation in a distributed market-based production control system

Authors: Csáji, B; Monostori, L; Kádár, B
Date: 2004.
Published by: Emergent Synthesis. Proceedings of the 5th international workshop IWES'04, Budapest (Page: 109-116)

Evaluating and improving production control systems by using emulation

Authors: Pheiffer, A; Kádár, B; Monostori, L
Date: 2003.
Published by: Applied Simulation and Modelling. Proceedings of the twelfth IASTED international conference, Marbella, 2003 (Page: 261-266)

Towards the realisation of digital enterprises

Authors: Monostori, L; Váncza, J; Márkus, A; Kádár, B; Viharos, ZSJ
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 99-106)

Digital enterprises: first results of a national R&D project

Authors: Monostori, L; Váncza, J; Márkus, A; Kádár, B; Viharos, ZSJ
Date: 2003.
Published by: Intelligent Robots and Systems, IROS 2003. Proceedings IEEE/RSJ International Conference. Vol. 3 (Page: 2335-2340)

Adaptive approaches to increasing the performance of production control systems

Authors: Kádár, B; Monostori, L; Csáji, BCS
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 305-312)

Improving multi-agent based scheduling by neurodynamic programming

Authors: Csáji, BCS; Kádár, B; Monostori, L
Date: 2003.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 2744, Page: 110-123)

Real-life scheduling using constraint programming and simulation

Authors: Kovács, A; Váncza, J; Kádár, B; Monostori, L; Pfeifer, A
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 213-218)

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Teaching manufacturing systems modelling through simulation in an international platform for education and research.

Authors: Ilie-Zudor, E; Monostori, L; Macchi, M; Kádár, B; Kuzmina, E
Date: 2002.
Published by: Proceedings of the 4th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises. MITIP 2002. Savona (Page: 41-46)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

The role of adaptive agents in distributed manufacturing.

Authors: Monostori, L; Kádár, B; Csáji, B
Date: 2002.
Published by: Proceedings of the 4th international workshop on emergent synthesis. IWES'02. Kobe (Page: 135-142)

Distributed control of manufacturing systems through adaptive agents.

Authors: Kádár, B; Monostori, L
Date: 2001.
Published by: Dynamic control and management system in manufacturing processes for the optimization of throughput and energy usage. DYCOMANS. Phase 2. Workshop 2. Integrated Control of Manufacturing. The Workshop preprint. Bucharest, 2001. (Page: 99-103)

Approaches to increase the performance of agent-based production systems.

Authors: Kádár, B; Monostori, L
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. ( Lecture notes in artificial intelligence 2070.) (Page: 612-621)

Adaptive agents in distributed manufacturing systems.

Authors: Kádár, B; Monostori, L
Date: 2001.
Published by: 10th IFAC symposium on information control problems in manufacturing. INCOM 2001. Vienna, 2001. (Page: 6)

Knowledge-based hybrid techniques combined with simulation: application to robust manufacturing systems. (Computer techniques.)

Authors: Mezgár, I; Monostori, L; Kádár, B; Egresits, C
Date: 2000.
Published by: Knowledge-based systems. Techniques and Applications. Vol. 3. (Page: 755-790)

Combined use of simulation and AI/machine learning techniques in designing manufacturing processes and systems.

Authors: Monostori, L; Kádár, B; Viharos, ZJ; Mezgár, I; Stefán, P
Department: Internet Technology Department
Date: 2000.
Published by: 2000 international CIRP design seminar on design with manufacturing: intelligent design concepts methods and algorithms. Conference proceedings. Haifa, 2000. (Page: 199-204)

AI and ML techniques combined with simulation for designing and controlling manufacturing processes and system.

Authors: Monostori, L; Kádár, B; Viharos, ZJ; Mezgár, I; Stefán, P
Department: Internet Technology Department
Date: 2000.
Published by: MIM 2000. IFAC symposium on manufacturing, modeling, management and control. Preprints. Rio Patras, 2000. (Page: 167-172)

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlaine, D; Kádár, B
Date: 2000.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 43, Issue no.: 2, Page: 123-137)

Holonic control of manufacturing systems.

Authors: Monostori, L; Kádár, B
Date: 1999.
Published by: MAS'99. 1st IFAC workshop on multi-agent-systems in production. Preprints. Vienna, 1999. (Page: 109-114)

Agent-based control of manufacturing systems.

Authors: Monostori, L; Kádár, B
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 1. (Page: 131-137)

Extended enterprise - Basic concepts, enabling information technologies, open questions.

Authors: Liszka, L; Kádár, B; Monostori, L; Ilie-Zudor, A
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 41-46)

Simulation and optimization of production and logistic systems with the SIMPLE++ package.

Authors: Kádár, B; Mikó, P; Monostori, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 109-114)

Elosztott intelligenciájú (holonikus) gyártórendszerek. (Holonic manufacturing systems: manufacturing systems with distributed intelligence.)

Authors: Kádár, B; Monostori, L
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 89-102)

Evaluation and compare of novel production paradigms and their control architectures.

Authors: Ilie-Zudor, A; Monostori, L; Kádár, B; Liszka, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 151-156)

Management of changes nad disturbances in manufacturing systems.

Authors: Monostori, L; Szelke, E; Kádár, B
Date: 1998.
Published by: ANNUAL REVIEWS IN CONTROL (Volume no.: 22, Page: 85-97)

Agent-based control of novel and traditional production systems.

Authors: Kádár, B; Monostori, L
Date: 1998.
Published by: ICME 98. CIRP international seminar on intelligent computation in manufacturing engineering. Proceedings. Capri, 1998. (Page: 31-38)

Agent based architectures for mastering changes and disturbances in manufacturing.

Authors: Monostori, L; Kádár, B
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applictions of artficial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol.2. (Lecture not) (Page: 755-764)

Management of changes and disturbances in production systems.

Authors: Monostori, L; Kádár, B; Hornyák, J
Date: 1998.
Published by: LSS '98 Large scale systems: theory and applications. 8th IFAC/IFORS/IMACS/IFIP symposium. Preprints. Rio Patras, 1998. Vol. 1. (Page: 313-318)

Approaches to managing changes and uncertainties in manufacturing.

Authors: Monostori, L; Kádár, B; Hornyák, J
Date: 1998.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 47, Issue no.: 1, Page: 365-368)

Novel approaches to production planning and control.

Authors: Monostori, L; Hornyák, J; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems. Lausanne, 1998 (Page: 115-132)

An object-oriented framework for developing distributed manfacturing architectures.

Authors: Kádár, B; Monostori, L; Szelke, E
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 173-179)

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlane, D; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems, Lausanne, 1998. (Page: 97-113)

Management of changes and disturbances in manufacturing systems.

Authors: Monostori, L; Szelke, E; Kádár, B
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 27-38)

Intelligent techniques for management of changes and disturbances in manufacturing.

Authors: Monostori, L; Szelke, E; Kádár, B
Date: 1997.
Published by: CIRP international symposium. Advanced design and manufacture in the global manufacturing era. Hong Kong, 1997. Vol. 1. (Page: 67-75)

A termelés-informatika fejlődési tendenciái.

Authors: Monostori, L; Kádár, B; Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 505-527)

Distributed manufacturing, extended enterprises.

Authors: Monostori, L; Kádár, B
Date: 1997.
Published by: ERCIM NEWS (Issue no.: 30, Page: 35-36)

An object oriented framework for developing distributed manufacturing architectures.

Authors: Kádár, B; Monostori, L; Szelke, E
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 548-554)

A simulation framework for development and evaluation of agent based manufacturing architectures.

Authors: Kádár, B; Monostori, L
Date: 1997.
Published by: DYCOMANS workshop IV. Control and management in computer integrated systems. Preprints. Zakopane, 1997. (Page: 59-65)

Approaches to coupling connectionist and expert systems in intelligent manufacturing.

Authors: Barschdorff, D; Monostori, L; Wöstenkühler, GW; Egresits, CS; Kádár, B
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 5-15)

Hybrid AI solutions and their application in manufacturing.

Authors: Monostori, L; Egresits, CS; Kádár, B
Date: 1996.
Published by: Industrial and engineering applications of artificial intelligence end expert systems. IEA/AIE 96. Proceedings of the ninth international conference. Fukuoka, 1996. (Page: 469-478)

Knowledge based reactive management of manufacturing cells.

Authors: Kádár, B; Markos, S; Monostori, L
Date: 1996.
Published by: IT and manufacturing partnerships. Delivering the promise. Proceedings of the conference on integration in manufacturing. Galwai, 1996.( Advances in design and manufacturing, 7.) (Page: 197-205)

Knowledge based monitoring and management of manufacturing cells.

Authors: Kádár, B; Markos, S; Monostori, L
Date: 1996.
Published by: Management and control: tools and action. DYCOMANS workshop II. Algarve, 1996. (Page: 83-88)

Virtual manufacturing using a hierarchically coupled hybrid AI system

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 369-374)

Virtual manufacturing by coupling connectionist and expert systems

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: 6th international DAAAM symposium. Proceedings. Krakow, 1995. Krakow, Politechnika Krakowska, 1995 (Page: 231-232)

Coupling expert systems and artificial neural networks: a hybrid AI solution and its application in manufacturing

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: microCAD' 95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 69-72)

Application of hybrid AI techniques in manufacturing

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: CAMP '95. CAD/CAM and multimedia. 5th international conference and trade show. Budapest, 1995 (Page: 52-62)

HYBEXP: a hierarchically coupled hybrid AI approach to production control

Authors: Kádár, B; Egresits, CS; Monostori, L
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 94-101)

Approaches to coupling connectionist and expert systems in intelligent manufacturing

Authors: Barschdorff, D; Monostori, L; Wörstenkühler, GW; Egresits, CS; Kádár, B
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 591-608)

Kádár, Botond

PLC code processing for automatic simulation model generation.

Authors: Popovics, Gergely; Pfeiffer, András; Kádár, Botond; Vén, Zoltán; Monostori, László
Date: 2011. 09. 12.
Published by: MAS 2011. 10th international conference on modeling and applied simulation.Rome, 2011. (Page: 155-159.)

Simulation-based evaluation of production control decisions in large-scale manufacturing.

Authors: Popovics, Gergely; Pfeiffer, András; Kádár, Botond; Monostori, László
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 116-121.)

Co-analysing situations and production control rules in a large-scale manufacturing environment.

Authors: Kádár, Botond; Pfeiffer, András; Monostori, László; Popovics, Gergely; Vén, Zoltán
Date: 2011.
Published by: 44th CIRP conference on manufacturing systems. Madison, 2011. (Length: paper No: 101., 1-6. page)

Novel IT solutions for increasing transparency in production and in supply chains.

Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kádár, Botond; Karnok, Dávid; Pfeiffer, András; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2011. 07. 31.
Published by: ICPR 21. 1st international conference on production research. Innovation in product and production. Stuttgart, 2011. (Length: 1-6. page)

Simulation supported situation detection for real-time production control.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2010. 04. 15.
Published by: Factory automation 2010. Proceedings. Kecskemét, 2010. (Page: 7-12.)

Digital enterprise solution for integrated production planning and control.

Authors: Monostori, László; Erdős, Gábor Ferenc; Kádár, Botond; Kis, Tamás; Kovács, András; Pfeiffer, András; Váncza, József
Date: 2010.
Published by: Computers in Industry (Volume no.: 61, Issue no.: 2, Page: 112-126.)
Download article: [008]

Towards adaptive and digital manufacturing.

Authors: Monostori, László; Csáji, Balázs Csanád; Kádár, Botond; Pfeiffer, András; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc
Date: 2010. 04.
Published by: Annual Reviews in Control (Volume no.: 34, Issue no.: 1, Page: 118-128.)
Download article: [007], [html]

Enhanced control of complex production structures by tight coupling of the digital and the physical worlds.

Authors: Kádár, Botond; Lengyel, A.; Monostori, László; Suginishi, Y.; Pfeiffer, András; Nonaka, Y.
Date: 2010.
Published by: CIRP Annals - Manufacturing Technology (Volume no.: 59, Issue no.: 1, Page: 437-440.)
Download article: [123]

Self-building simulation tool for daily decision support in production control.

Authors: Pfeiffer, András; Kádár, Botond; Szathmári, Marcell Ferenc; Popovics, Gergely; Vén, Zoltán; Monostori, László
Date: 2009.
Published by: MAS 2009. International workshop on modelling & applied simulation. Puerto de La Cruz, 2009. (Page: 246-254.)

Real-time, cooperative enterprises: Results of an industry - academia project.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 8-12.)

Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Gábor Ferenc; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 724-731.)

Real-time, cooperative enterprises for customised mass production.

Authors: Monostori, László; Kis, Tamás; Váncza, József; Kádár, Botond; Erdős, Gábor Ferenc
Date: 2009.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 22, Issue no.: 1, Page: 55-68.)

Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei.

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 11-15.)

Situation detection in production control by applying on-line simulation.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2008.
Published by: DET 2008. 5th international conference on digital enterprise technology. Nantes, 2008. (Length: 1-9. 42.pdf page)

Stability-oriented evaluation of hybrid rescheduling methods in a job-shop with machine breakdowns.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 6, Page: 563-570.)

Simulation-based monitoring and validation of production control decisions.

Authors: Kádár, Botond; Pfeiffer, András; Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 107-114.)

Real-time, cooperative enterprises: challenges and results of an industry-academia project.

Authors: Monostori, László; Salekovics, István; Váncza, József; Kis, Tamás; Kádár, Botond; Farkas, Zoltán
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 95-100.)

Simulation-based validation of production control decisions, subject to resource availability.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Editor: Bruzzone, A.G.; Longo, F.; Merkuryev, Y.
Date: 2007.
Published by: I3M2007. International Mediterranean modelling multiconference. EMSS 2007. 19th European modelling and simulation symposium. Bergeggi, 2007. (Page: 1-10. (CD))

Real-time, cooperative enterprises for customised mass production.

Authors: Monostori, László; Kis, Tamás; Kádár, Botond; Váncza, József; Erdős , Ferenc Gábor
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Page: 1067-1076. (CD))

Stability-oriented evaluation of rescheduling strategies, by using simulation.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2007.
Published by: Computers in Industry (Volume no.: 58, Issue no.: 7, Page: 630-643.)
Download article: [009]

Simulation as one of the core technologies for digital enterprises: assessment of hybrid rescheduling methods.

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Date: 2008.
Published by: International Journal of Computer Integrated Manufacturing (Volume no.: 21, Issue no.: 2, Page: 206-214.)
Download article: [html]

Solution approaches to real-time control of customized mass production.

Authors: Monostori, László; Kádár, Botond; Pfeiffer, András; Karnok, Dávid
Date: 2007.
Published by: CIRP Annals-Manufacturing Technology (Volume no.: 56, Issue no.: 1, Page: 431-434.)
Download article: [103]

Simulating the manufacturing execution system: interactions with the workers and managers.

Authors: Karnok, Dávid; Kádár, Botond; Monostori, László
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Length: 313-321. (CD) page)

Real-time, cooperative enterprises: requirements and solution approaches

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Dolgui, A
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 1. (Page: 561-566)

Reinforcement learning in a distributed market-based production control system

Authors: Csáji, Balázs Csanád; Monostori, László; Kádár, Botond
Date: 2006.
Published by: Advanced Engineering Informatics (Volume no.: 20, Issue no.: 3, Page: 279-288)

Integration of production-, quality- and process monitoring for agile manufacturing

Authors: Viharos, Zsolt János; Kádár, Botond; Monostori, László; Kemény, Zsolt; Csáji, Balázs Csanád; Pfeiffer, András; Karnok, Dávid
Date: 2006.
Published by: XVIII IMEKO world congress. Metrology for a sustainable development. Proceedings. Rio de Janeiro, 2006. (Page: 1-6)

Simulation-based control strategy optimization by using genetic algorithms

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 469-474)

Simulating the interaction between the shop floor personnel and the manufacturing execution system

Authors: Karnok, Dávid; Monostori, László; Kádár, Botond
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 457-462)

Stability-oriented evaluation of hybrid rescheduling methods in a job-shop with machine breakdowns

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Editor: Butala, P
Date: 2006.
Published by: 39th CIRP international seminar on manufacturing systems. The morphology of innovative manufacturing systems. Ljubljana, 2006. (Page: 173-178)

Real-time, cooperative enterprises: requirements and solution approaches

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Preprints. Vol. 1. Saint-Etienne, 2006. (Page: 591-596)

Real-time, cooperative enterprises

Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 1-8)

Real-time, cooperative enterprises: management of changes and disturbances in different levels of production.

Authors: Monostori, László; Váncza, József; Márkus, András; Kis, Tamás; Kovács, András; Erdős , Ferenc Gábor; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Volume no.: 35, Issue no.: 4, Page: 351-359.)

Simulation as one of the core technologies for digital enterprises; assessment of hybrid rescheduling methods

Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Editor: Cunha, PF
Date: 2006.
Published by: DET 2006. Proceedings of the 3rd CIRP sponsored conference in digital enterprise technology. Setúbal, 2006. (Page: 1-8)

Langius, Erik A. F.

A low-cost perspective in identifier-based services of supply chains.

Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László; Langius, Erik A. F.
Date: 2008.
Published by: EFTA 2008. 13th IEEE international conference on emerging technologies and factory automation. Hamburg, 2008. (Page: 1338-1345.)

Lengyel, A.

Enhanced control of complex production structures by tight coupling of the digital and the physical worlds.

Authors: Kádár, Botond; Lengyel, A.; Monostori, László; Suginishi, Y.; Pfeiffer, András; Nonaka, Y.
Date: 2010.
Published by: CIRP Annals - Manufacturing Technology (Volume no.: 59, Issue no.: 1, Page: 437-440.)
Download article: [123]

Liszka, L

Extended enterprise - Basic concepts, enabling information technologies, open questions.

Authors: Liszka, L; Kádár, B; Monostori, L; Ilie-Zudor, A
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 41-46)

Evaluation and compare of novel production paradigms and their control architectures.

Authors: Ilie-Zudor, A; Monostori, L; Kádár, B; Liszka, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 151-156)

Locatelli, I

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Longeri, T

An international platform for education and research in the area of modelling of industrial manufacturing systems.

Authors: Ilie-Zudor, E; Monostori, L; Wiendahl, HP; Macchi, M; Longeri, T; Di Mascolo, M
Date: 2002.
Published by: Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium. Intelligent Manufacturing and Automation: Learning from Nature. Vienna (Page: 221-222)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Lopitzsch, J

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Lorincz, A

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

Lutters, D.

Cooperative and responsive manufacturing enterprises.

Authors: Váncza, József; Monostori, László; Lutters, D.; Kumara, S.R.; Tseng, M.; Valckenaers, P.; Van Brussel, H.
Date: 2011.
Published by: CIRP Annals - Manufacturing Technology (Volume no.: 60, Issue no.: 2, Page: 797-820. )

Macchi, M

eSCM: education on supply-chain management on graduate level and within corporations

Authors: Ilie-Zudor, A; Pinto, R; Macchi, M; Monostori, L
Date: 2005.
Published by: WSEAS TRANSACTIONS ON ADVANCES IN ENGINEERING EDUCATION (Volume no.: 2, Issue no.: 2, Page: 66-73)
Download article: [pdf]

An international platform for education and research in the area of modelling of industrial manufacturing systems.

Authors: Ilie-Zudor, E; Monostori, L; Wiendahl, HP; Macchi, M; Longeri, T; Di Mascolo, M
Date: 2002.
Published by: Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium. Intelligent Manufacturing and Automation: Learning from Nature. Vienna (Page: 221-222)

Teaching manufacturing systems modelling through simulation in an international platform for education and research.

Authors: Ilie-Zudor, E; Monostori, L; Macchi, M; Kádár, B; Kuzmina, E
Date: 2002.
Published by: Proceedings of the 4th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises. MITIP 2002. Savona (Page: 41-46)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Macchi, M.

Engineering education on supply-chain management for students and for employees in industry.

Authors: Ilie-Zudor, Angyalka Elisabeth; Macchi, M.; Monostori, László; Scotti, S.; Kemény, Zsolt
Date: 2011.
Published by: Computer Applications in Engineering Education (Volume no.: 19, Issue no.: 1, Page: 81-88.)
Download article: [html]

Magai, I

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

Markos, S

Selection of input and output variables for ANN based modeling of cutting processes.

Authors: Viharos, ZSJ; Monostori, L; Markos, S
Date: 1999.
Published by: Innovative and integrated manufacturing. X workshop on supervising and diagnostics of machining systems. Karpacz, 1999. (Scientific papers of the Institute of Mechanical Engineering and Automation of the Wroclaw University of Technology, 72. Con) (Page: 121-131)

Dobór wejśa i wyjśa sieci neuronowych modelujcych procesy skrawania. (Selection of input and output variables of ANN-based modelling of cutting processes.)

Authors: Viharos, ZSJ; Monostori, L; Markos, S
Date: 1999.
Published by: INZYNIERIA MASZYN (Volume no.: 3, Issue no.: 4, Page: 97-110)

A framework for modelling, monitoring and optimisation of manufacturing processes and process chains by using machine learning and search algorithms.

Authors: Viharos, ZSJ; Monostori, L; Markos, S
Date: 1999.
Published by: Integration in technical diagnostics. 9th IMEKO TC-10 international conference on technical diagnostics. Wroclaw, 1999. (Scientific papers of the Institute of Mining of the Wroclaw University of Technology 86. Conferences, 24.) (Page: 249-254)

Satisfying various requirements in different levels and stages of machining using one general ANN-based process model.

Authors: Monostori, L; Viharos, ZSJ; Markos, S
Date: 1999.
Published by: Proceedings of the 15th international conference on computer-aided production engineering. CAPE'99. Durham, 1999. (Page: 477-484n)

Quality-oriented, comprehensive modelling of machining processes.

Authors: Markos, S; Viharos, ZSJ; Monostori, L
Date: 1998.
Published by: 6th international symposium "metrology for quality control in production". 6th IMEKO symposium. Proceedings. Vienna, 1998. (Page: 67-74)

Investigation of machined surfaces using artificial intelligence methods.

Authors: Szalay, T; Alpek, F; Monostori, L; Markos, S; Viharos, ZJ
Date: 1996.
Published by: Proceedings of the IXth international conference on cutting tools. IX. nemzetközi szerszámkonferencia. Miskolc, 1996. (Page: 635-640)

Knowledge based reactive management of manufacturing cells.

Authors: Kádár, B; Markos, S; Monostori, L
Date: 1996.
Published by: IT and manufacturing partnerships. Delivering the promise. Proceedings of the conference on integration in manufacturing. Galwai, 1996.( Advances in design and manufacturing, 7.) (Page: 197-205)

Knowledge based monitoring and management of manufacturing cells.

Authors: Kádár, B; Markos, S; Monostori, L
Date: 1996.
Published by: Management and control: tools and action. DYCOMANS workshop II. Algarve, 1996. (Page: 83-88)

Monitoring of the milling process through neural network and fuzzy techniques

Authors: Markos, S; Monostori, L; Nacsa, J; Szöllősi, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 239-250)

Neural networks for modelling and monitoring of manufacturing processes; milling

Authors: Monostori, L; Markos, S; Krämer, S; Nacsa, J; Szöllősi, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Proceedings of the 8th IMEKO Symposium on Technical Diagnostics Dresden, 1992 (Page: 502-512)

Markos, S.

Quantifiable closed quality control (QC2).

Authors: Viharos, Zsolt János; Monostori, László; Schmitt, R.; Glöckner, H.; Stiller, S.; Markos, S.
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 25-33.)

McFarlaine, D

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlaine, D; Kádár, B
Date: 2000.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 43, Issue no.: 2, Page: 123-137)

McFarlane, D

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlane, D; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems, Lausanne, 1998. (Page: 97-113)

Meroni, A

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

Mezgár, I

Knowledge-based hybrid techniques combined with simulation: application to robust manufacturing systems. (Computer techniques.)

Authors: Mezgár, I; Monostori, L; Kádár, B; Egresits, C
Date: 2000.
Published by: Knowledge-based systems. Techniques and Applications. Vol. 3. (Page: 755-790)

Combined use of simulation and AI/machine learning techniques in designing manufacturing processes and systems.

Authors: Monostori, L; Kádár, B; Viharos, ZJ; Mezgár, I; Stefán, P
Department: Internet Technology Department
Date: 2000.
Published by: 2000 international CIRP design seminar on design with manufacturing: intelligent design concepts methods and algorithms. Conference proceedings. Haifa, 2000. (Page: 199-204)

AI and ML techniques combined with simulation for designing and controlling manufacturing processes and system.

Authors: Monostori, L; Kádár, B; Viharos, ZJ; Mezgár, I; Stefán, P
Department: Internet Technology Department
Date: 2000.
Published by: MIM 2000. IFAC symposium on manufacturing, modeling, management and control. Preprints. Rio Patras, 2000. (Page: 167-172)

Design and real-time reconfiguration of robust manufacturing systems by using design of experiments and artificial neural networks.

Authors: Mezgár, I; Egresits, CS; Monostori, L
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 61-70)

A coupled system for re-engineering of robust manufacturing system configurations.

Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL
Date: 1996.
Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64)

Re-engineering of robust manufacturing system configurations

Authors: Mezgár, I; Egresits, CS; Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 261-280)

Mikó, P

Simulation and optimization of production and logistic systems with the SIMPLE++ package.

Authors: Kádár, B; Mikó, P; Monostori, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 109-114)

Molina, A

From plant and logistics control to multi-enterprise collaboration

Authors: Nof, SY; Morel, G; Monostori, László; Molina, A; Filip, F
Date: 2006.
Published by: Annual Reviews in Control (Volume no.: 30, Issue no.: 1, Page: 55-68)

From plant and logistics control to multi-enterprise collaboration

Authors: Nof, SY; Morel, G; Monostori, L; Molina, A; Filip, F
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-14)

Molina, A.

Advances in e-manufacturing, e-logistics, and e-service systems.

Authors: Nof, S. Y.; Filip, F. G.; Molina, A.; Monostori, László; Pereira, C. E.
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 5742-5750.)

Monostori, L

Simulation supported analysis of a dynamic rescheduling system

Authors: Pfeiffer, A; Kádár, B; Csáji, B; Monostori, L
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 25-30)

From plant and logistics control to multi-enterprise collaboration

Authors: Nof, SY; Morel, G; Monostori, L; Molina, A; Filip, F
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-14)

Agent-based product life cycle data support

Authors: Niemann, J; Ilie-Zudor, A; Monostori, L; Westkämper, E
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 105-110)
Download article: [pdf]

Technical monitoring and diagnostics: prerequisite of intelligent, adaptive manufacturing systems

Authors: Monostori, L
Date: 2005.
Published by: Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005. (Page: 39-44)

Real-time, cooperative enterprises: management of changes and disturbances on different levels of production

Authors: Monostori, L; Váncza, J; Márkus, A; Kis, T; Kovács, A; Erdős, P; Kádár, B; Viharos, ZsJ
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005.

Authors: Monostori, L; Viharos, ZsJ
Date: 2005.
Published by: (Length: 183 page)

Organizing and running real-time, cooperative enterprises

Authors: Monostori, L; Fornasiero, R; Váncza, J
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 144-157)

Building agent-based systems in a discrete-event simulation environment

Authors: Kádár, B; Pfeiffer, A; Monostori, L
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3690, Page: 595-599)

Adaptive approaches to increasing the performance of production control systems

Authors: Kádár, B; Csáji, B; Monostori, L
Date: 2005.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 34, Issue no.: 1, Page: 33-43)

Production scheduling and control

Authors: Iung, B; Monostori, L
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 127-128)

Manufacturing scheduling and control in the extended enterprise

Authors: Iung, B; Monostori, L
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 129-143)

Web-based education on graduate level within corporations in the field of supply-chain management

Authors: Ilie-Zudor, A; Kimmich, J; Monostori, L
Date: 2005.
Published by: Proceedings of the 5th WSEAS international conference on distance learning and web engineering. Corfu, 2005. (Page: 65-70)

eSCM: education on supply-chain management on graduate level and within corporations

Authors: Ilie-Zudor, A; Pinto, R; Macchi, M; Monostori, L
Date: 2005.
Published by: WSEAS TRANSACTIONS ON ADVANCES IN ENGINEERING EDUCATION (Volume no.: 2, Issue no.: 2, Page: 66-73)
Download article: [pdf]

E-learning in the field of supply-chain management on graduate level and within corporations

Authors: Ilie-Zudor, A; Monostori, L
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1-6)

Stochastic reactive production scheduling by multi-agent based asynchronous approximate dynamic programming

Authors: Csáji, B; Monostori, L
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3690, Page: 388-397)

Stochastic approximate scheduling by neurodynamic learning

Authors: Csáji, B; Monostori, L
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-6)

Quality-oriented modelling, simulation and management of production lines

Authors: Viharos, ZSJ; Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 457-462)

Simulation support for rescheduling

Authors: Pfeiffer, A; Kádár, B; Monostori, L
Date: 2004.
Published by: Simulation in Industry. Proceedings of the 16th European Simulation Symposium (ESS 2004) Budapest (Page: 41-46)

Simulation supported analysis of a dynamic rescheduling system

Authors: Pfeiffer, A; Kádár, B; Csáji, B; Monostori, L
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 24-29)

Agent-based product life cycle data support

Authors: Niemann, J; Ilie-Zudor, E; Monostori, L; Westkamper, E
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 103-108)

Engineering intelligent systems, introduction

Authors: Monostori, L
Date: 2004.
Published by: APPLIED INTELLIGENCE (Volume no.: 21, Issue no.: 2, Page: 115-116)

Adaptation and learning in distributed production control

Authors: Monostori, L; Csáji, B; Kádár, B
Date: 2004.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 53, Issue no.: 1, Page: 349-352)

Testing and validation of deterministic schedules in a simulated stochastic environment

Authors: Kádár, B; Pfeiffer, A; Monostori, L
Date: 2004.
Published by: Information Control Problems in Manufacturing. Proceedings of the 11th IFAC symposium INCOM 2004, Salvador (Page: 6 pages)

Discrete event simulation for supporting production planning and scheduling decisions in digital factories

Authors: Kádár, B; Pfeiffer, A; Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 441-448)

Simulation supported agent-based adaptive production scheduling

Authors: Csáji, B; Kádár, B; Monostori, L; Pfeiffer, A
Date: 2004.
Published by: Global Challenges in Manufacturing. Proceedings of the International IMS Forum 2004. Cernobbio, Part 1. (Page: 658-665)

Learning and cooperation in a distributed market-based production control system

Authors: Csáji, B; Monostori, L; Kádár, B
Date: 2004.
Published by: Emergent Synthesis. Proceedings of the 5th international workshop IWES'04, Budapest (Page: 109-116)

Realizing the digital factory: monitoring of complex production systems

Authors: Viharos, ZSJ; Monostori, L; Csongrádi, Z
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 29-34)

Realizing the digital factory: monitoring of complex production systems

Authors: Viharos, ZSJ; Monostori, L; Csongrádi, Z
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 31-36)

Monitoring of complex production systems, in view of digital factories

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Koródi, T; Csongrádi, Z; Kenderesy, T; Solymosi, T; Lorincz, A; Magai, I; Fazekas, F
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1463-1468)

An important aspect of a digital factory: monitoring of complex production systems

Authors: Viharos, ZSJ; Monostori, L; Csongrádi, Z
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration. WESIC 2003. Miskolc, Vol. 2. (Page: 363-370)

Evaluating and improving production control systems by using emulation

Authors: Pheiffer, A; Kádár, B; Monostori, L
Date: 2003.
Published by: Applied Simulation and Modelling. Proceedings of the twelfth IASTED international conference, Marbella, 2003 (Page: 261-266)

Towards the realisation of digital enterprises

Authors: Monostori, L; Váncza, J; Márkus, A; Kádár, B; Viharos, ZSJ
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 99-106)

Intelligent manufacturing systems, digital enterprises, production networks: challenges for the scientific & industrial collaboration

Authors: Monostori, L
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 289-302)

Digital enterprises: first results of a national R&D project

Authors: Monostori, L; Váncza, J; Márkus, A; Kádár, B; Viharos, ZSJ
Date: 2003.
Published by: Intelligent Robots and Systems, IROS 2003. Proceedings IEEE/RSJ International Conference. Vol. 3 (Page: 2335-2340)

AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing

Authors: Monostori, L
Date: 2003.
Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 16, Issue no.: 4, Page: 277-291)

Adaptive approaches to increasing the performance of production control systems

Authors: Kádár, B; Monostori, L; Csáji, BCS
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 305-312)

Constraint programming based support for production networks management

Authors: Ilie Zudor, E; Monostori, L; Kuzmina, E
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 13-18)

Constraint programming based support for production networks management

Authors: Ilie Zudor, E; Monostori, L; Kuzmina, E
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 11-16)

Improving multi-agent based scheduling by neurodynamic programming

Authors: Csáji, BCS; Kádár, B; Monostori, L
Date: 2003.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 2744, Page: 110-123)

Real-life scheduling using constraint programming and simulation

Authors: Kovács, A; Váncza, J; Kádár, B; Monostori, L; Pfeifer, A
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 213-218)

Intelligent techniques for quality control and management

Authors: Monostori, L
Date: 2002.
Published by: TOTAL QUALITY MANAGEMENT (Volume no.: 30, Issue no.: 1, Page: 11-16)

Environmental and life cycle issues in holonic manufacturing

Authors: Monostori, L; Ilie Zudor, E
Date: 2002.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 31, Issue no.: 3, Page: 209-214)

Digital factories, production networks.

Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ
Date: 2002.
Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54)

An international platform for education and research in the area of modelling of industrial manufacturing systems.

Authors: Ilie-Zudor, E; Monostori, L; Wiendahl, HP; Macchi, M; Longeri, T; Di Mascolo, M
Date: 2002.
Published by: Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium. Intelligent Manufacturing and Automation: Learning from Nature. Vienna (Page: 221-222)

Digital enterprises: A national R&D project in Hungary.

Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ
Date: 2002.
Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272)

Integration of on-line and face-to-face learning at an international platform for teaching and research.

Authors: Ilie-Zudor, E; Monostori, L; Kádár, B; Cavalieri, S; Cieminski, G; Di Mascolo, M; Campi, A
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 133-139)

Teaching manufacturing systems modelling through simulation in an international platform for education and research.

Authors: Ilie-Zudor, E; Monostori, L; Macchi, M; Kádár, B; Kuzmina, E
Date: 2002.
Published by: Proceedings of the 4th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises. MITIP 2002. Savona (Page: 41-46)

AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing.

Authors: Monostori, L
Date: 2002.
Published by: 15th Triennial World Congress of the International Federation of Automatic Control. Plenary papers, survey papers and milestones. Barcelona, 2002. (Page: 119-130)

Shop-floor scheduling based on reinforcement learning algorithm.

Authors: Stefán, P; Monostori, L
Date: 2002.
Published by: Intelligent computation in manufacturing engineering. 3rd CIRP international seminar on intelligent computation in manufacturing engineering. ICME 2002. Ischia (Page: 71-74)

Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research.

Authors: Cavalieri, S; Garetti, M; Macchi, M; Campi, A; Collina, F; Colorni, A; Locatelli, I; Longeri, T; Cieminski, G; Lopitzsch, J; Di Mascolo, M; Frein, Y; Kádár, B; Monostori, L; Ilie-Zudor, E; Meroni, A; Santambrogio, N
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 153-159)

An agent-based approach for production control incorporating environmental and life-cycle issues, together with sensitivity analysis.

Authors: Ilie-Zudor, E; Monostori, L
Date: 2002.
Published by: Developments in Applied Artificial Intelligence. 15th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems. IEA/AIE 2002. Cairns, 2002. (Lecture notes in computer science 2358) (Page: 157-167)

Training and application of artificial neural networks with incomplete data.

Authors: Viharos, ZSJ; Monostori, L; Vincze, T
Date: 2002.
Published by: Developments in Applied Artificial Intelligence. 15th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems. IEA/AIE 2002. Cairns, 2002. (Lecture notes in computer science 2358) (Page: 649-659)

Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research.

Authors: Ilie-Zudor, E; Kádár, B; Monostori, L; Cavalieri, S; Wiendahl, HP; Cieminski, G; Di Mascolo, M; Campi, A; Santambrogio, N
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 754-758)

Optimisation of production systems by using simulation and artificial intelligence techniques.

Authors: Viharos, ZSJ; Monostori, L
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 579-583)

Monitoring parameter based determination of production tolerances.

Authors: Viharos, ZSJ; Monostori, L; Novák, K; Tóth, GA; Kenderesy, T; Csongrádi, Z; Koródi, T
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 574-578)

Digital enterprises, production networks.

Authors: Monostori, L
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest, Vol. 2. (Page: 540-544)

The role of adaptive agents in distributed manufacturing.

Authors: Monostori, L; Kádár, B; Csáji, B
Date: 2002.
Published by: Proceedings of the 4th international workshop on emergent synthesis. IWES'02. Kobe (Page: 135-142)

SZTAKI in PLANET: an introduction.

Authors: Monostori, L; Váncza, J
Date: 2002.
Published by: PLANET NEWS (Volume no.: 3, Page: 9-11)

Optimisation of process chains and production plants by using a hybrid, AI- and simulation based approach.

Authors: Viharos, ZSJ; Monostori, L
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence 2070.) (Page: 827-835)

Reinforcement learning for solving shortest-path and dynamic scheduling problems.

Authors: Stefán, P; Monostori, L; Erdélyi, F
Date: 2001.
Published by: Proceedings of the 3rd international workshop on emergent synthesis. IWES'01 Bled, 2001. (Page: 83-88)

Quasi-optimal solutions of the travelling salesman's problem in variable environment.

Authors: Stefán, P; Monostori, L; Vaskó, Z
Date: 2001.
Published by: 3rd international conference of Ph.D. students. Vol. I. Engineering sciences. Miskolc, 2001. (Page: 415-422)

On the relationship between learning capability and the Boltzmann-formula.

Authors: Stefán, P; Monostori, L
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001.( Lecture notes in artificial intelligence 2070.) (Page: 227-236)

On Internet routing problems in dynamically changing environment.

Authors: Stefán, P; Monostori, L
Date: 2001.
Published by: MicroCAD 2001. International scientific conference. Miskolc, 2001. Section J: "Gábor Dénes" Applied information engineering. (Page: 221-236)

Intelligent techniques for quality control and management.

Authors: Monostori, L
Date: 2001.
Published by: International working conference on total quality management - Advanced and intelligent approaches. Proceedings. Subotica, 2001. (Page: 21-30)

Intelligent techniques for managing complexity, changes and uncertainties in manufacturing.

Authors: Monostori, L
Date: 2001.
Published by: 10th IFAC symposium on information control problems in manufacturing. INCOM 2001. Vienna, 2001. (Page: 12)

Intelligent manufacturing processes and systems.

Authors: Monostori, L
Date: 2001.
Published by: Symposium on the 50th anniversary of Department of Manufacturing Engineering of Budapest University of Technology and Economics. (BUTE). Budapest, 2001. (Page: 17-30)

Hybrid, AI- and simulation-supported optimisation of process chains and production plants.

Authors: Monostori, L; Viharos, ZSJ
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 50, Issue no.: 1, Page: 353-356)

Distributed control of manufacturing systems through adaptive agents.

Authors: Kádár, B; Monostori, L
Date: 2001.
Published by: Dynamic control and management system in manufacturing processes for the optimization of throughput and energy usage. DYCOMANS. Phase 2. Workshop 2. Integrated Control of Manufacturing. The Workshop preprint. Bucharest, 2001. (Page: 99-103)

Approaches to increase the performance of agent-based production systems.

Authors: Kádár, B; Monostori, L
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. ( Lecture notes in artificial intelligence 2070.) (Page: 612-621)

Adaptive agents in distributed manufacturing systems.

Authors: Kádár, B; Monostori, L
Date: 2001.
Published by: 10th IFAC symposium on information control problems in manufacturing. INCOM 2001. Vienna, 2001. (Page: 6)

Modelling and management of production networks.

Authors: Ilie-Zudor, E; Monostori, L
Date: 2001.
Published by: Digital enterprise challenges. Life-cycle approach to management and production. (Page: 60-71)

Agent-based support for handling environmental and life-cycle issues.

Authors: Ilie-Zudor, E; Monostori, L
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence 2070.) (Page: 812-820)

Számítástechnika, informatika a gépgyártás-technológiában. (Informatics in manufacturing technology.)

Authors: Erdélyi, F; Horváth, M; Kulcsár, B; Monostori, L; Renner, G; Tóth, T
Department: Geometric Modelling and Computer Vision Laboratory
Date: 2001.
Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 157-186)

Emergent synthesis methodologies for manufacturing.

Authors: Ueda, K; Márkus, A; Monostori, L; Kals, HJJ; Arai, T
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 50, Issue no.: 2, Page: 535-551)

Multipurpose modeling and optimization of production processes and process chains by combining machine learning and search techniques.

Authors: Monostori, L; Viharos, ZSJ
Date: 2000.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Volume no.: 30, Issue no.: 4, Page: 6)

Knowledge-based hybrid techniques combined with simulation: application to robust manufacturing systems. (Computer techniques.)

Authors: Mezgár, I; Monostori, L; Kádár, B; Egresits, C
Date: 2000.
Published by: Knowledge-based systems. Techniques and Applications. Vol. 3. (Page: 755-790)

New manufacturing paradigms.

Authors: Ilie Zudor, E; Monostori, L
Date: 2000.
Published by: Analele Universitatii din Oradea. Fasc. Mecanica. Sect. Technologii in Constructia de Masini. (Page: 357-362)

Reinforcement learning methods in information engineering.

Authors: Stefán, P; Monostori, L; Pupp, Z
Date: 2000.
Published by: MicroCAD'2000. International computer science conference. Miskolc, 2000. (Page: 187-192)

Quality-oriented modelling and optimisation of production processes and process chains.

Authors: Monostori, L; Viharos, ZJ
Date: 2000.
Published by: IMEKO 2000. XVI. IMEKO world congress. Proceedings. Vienna, 2000. Vol. 8. Measurement of geometrical quantities, quality management. (Page: 439-444)

Combined use of simulation and AI/machine learning techniques in designing manufacturing processes and systems.

Authors: Monostori, L; Kádár, B; Viharos, ZJ; Mezgár, I; Stefán, P
Department: Internet Technology Department
Date: 2000.
Published by: 2000 international CIRP design seminar on design with manufacturing: intelligent design concepts methods and algorithms. Conference proceedings. Haifa, 2000. (Page: 199-204)

AI and ML techniques combined with simulation for designing and controlling manufacturing processes and system.

Authors: Monostori, L; Kádár, B; Viharos, ZJ; Mezgár, I; Stefán, P
Department: Internet Technology Department
Date: 2000.
Published by: MIM 2000. IFAC symposium on manufacturing, modeling, management and control. Preprints. Rio Patras, 2000. (Page: 167-172)

Environmental and life cycle issues in holonic manufacturing.

Authors: Monostori, L; Ilie Zudor, E
Date: 2000.
Published by: The 33rd CIRP international seminar on manufacturing systems. Proceedings. Stockholm, 2000. (Page: 176-181)

Intelligent machines.

Authors: Monostori, L
Date: 2000.
Published by: Proceedings of second conference on mechanical engineering. Budapest, 2000. Vol 1. (Page: 24-36)

Satisfying various requirements in different levels and stages of machining using one general ANN-based process model.

Authors: Monostori, L; Viharos, ZSJ
Date: 2000.
Published by: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Volume no.: 107, Issue no.: 1-3, Page: 228-235)

AI-based modelling and optimisation of coupled production processes.

Authors: Viharos, ZSJ; Monostori, L
Date: 2000.
Published by: ERCIM NEWS (Issue no.: 42, Page: 32-33)

Environmental and life cycle issues in agent-based manufacturing.

Authors: Ilie Zudor, E; Monostori, L
Date: 2000.
Published by: ERCIM NEWS (Issue no.: 42, Page: 33-34)

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlaine, D; Kádár, B
Date: 2000.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 43, Issue no.: 2, Page: 123-137)

Intelligent, quality-oriented supervisory control of manufacturing processes and process chains.

Authors: Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: Techniques for supervisory management systems. DYCOMANS phase 2 workshop I. Preprints. Bled, 1999. (INCO Copernicus network, No. 977022.) (Page: 129-134)

Automatic input-output configuration and generation of ANN-based process models and their application in machining.

Authors: Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: Multiple approaches to intelligent systems. 12th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE-99. Proceedings. Cairo, 1999. (Lecture notes in artificial intelligence) (Page: 659-668)

A general, ANN-based cutting model and its application in different phases of manufacturing.

Authors: Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 123-129)

A compromise oriented optimization tool for supporting decision making in machining.

Authors: Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Leuven, 1999. (Page: 1-2)

Selection of input and output variables for ANN based modeling of cutting processes.

Authors: Viharos, ZSJ; Monostori, L; Markos, S
Date: 1999.
Published by: Innovative and integrated manufacturing. X workshop on supervising and diagnostics of machining systems. Karpacz, 1999. (Scientific papers of the Institute of Mechanical Engineering and Automation of the Wroclaw University of Technology, 72. Con) (Page: 121-131)

Dobór wejśa i wyjśa sieci neuronowych modelujcych procesy skrawania. (Selection of input and output variables of ANN-based modelling of cutting processes.)

Authors: Viharos, ZSJ; Monostori, L; Markos, S
Date: 1999.
Published by: INZYNIERIA MASZYN (Volume no.: 3, Issue no.: 4, Page: 97-110)

A framework for modelling, monitoring and optimisation of manufacturing processes and process chains by using machine learning and search algorithms.

Authors: Viharos, ZSJ; Monostori, L; Markos, S
Date: 1999.
Published by: Integration in technical diagnostics. 9th IMEKO TC-10 international conference on technical diagnostics. Wroclaw, 1999. (Scientific papers of the Institute of Mining of the Wroclaw University of Technology 86. Conferences, 24.) (Page: 249-254)

Reactive scheduling in real time production control.

Authors: Szelke, E; Monostori, L
Date: 1999.
Published by: Modeling manufacturing systems. From aggregate planning to real-time control. (Page: 65-113)

Using symbolic and sub-symbolic methods in solving problems difficult to analyze.

Authors: Stefán, P; Monostori, L; Erdélyi, F
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 195-200)

Subsymbolic and hybrid artificial intelligence techniques in financial engineering.

Authors: Monostori, L
Date: 1999.
Published by: ERCIM NEWS (Volume no.: 38, Page: 21-22)

Multipurpose modelling and optimisation of production processes and process chains by combining machine learning and search techniques.

Authors: Monostori, L; Viharos, VZS
Date: 1999.
Published by: The 32nd CIRP international seminar on manufacturing Systems. New supporting tools for designing products and production systems. Proceedings. Leuven, 1999. (Page: 399-408)

Satisfying various requirements in different levels and stages of machining using one general ANN-based process model.

Authors: Monostori, L; Viharos, ZSJ; Markos, S
Date: 1999.
Published by: Proceedings of the 15th international conference on computer-aided production engineering. CAPE'99. Durham, 1999. (Page: 477-484n)

Holonic control of manufacturing systems.

Authors: Monostori, L; Kádár, B
Date: 1999.
Published by: MAS'99. 1st IFAC workshop on multi-agent-systems in production. Preprints. Vienna, 1999. (Page: 109-114)

Agent-based control of manufacturing systems.

Authors: Monostori, L; Kádár, B
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 1. (Page: 131-137)

Mesterséges intelligencia alkalmazások a gépipari folyamat felügyeletben. (Artificial intelligence applications in monitoring of manufacturing processes.)

Authors: Monostori, L; Egresits, CS
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 53-75)

Extended enterprise - Basic concepts, enabling information technologies, open questions.

Authors: Liszka, L; Kádár, B; Monostori, L; Ilie-Zudor, A
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 41-46)

Simulation and optimization of production and logistic systems with the SIMPLE++ package.

Authors: Kádár, B; Mikó, P; Monostori, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 109-114)

Elosztott intelligenciájú (holonikus) gyártórendszerek. (Holonic manufacturing systems: manufacturing systems with distributed intelligence.)

Authors: Kádár, B; Monostori, L
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 89-102)

Incorporation of environmental issues in production control.

Authors: Ilie-Zudor, A; Monostori, L
Date: 1999.
Published by: Annals of DAAAM for 1999 and proceedings of the 10th international DAAAM symposium "intelligent manufacturing and automation: past - present - future". Vienna, 1999. (Page: 209-210)

An environmentally benign approach to agent-based manufacturing.

Authors: Ilie-Zudor, A; Monostori, L
Date: 1999.
Published by: MAS'99. 1st IFAC workshop on multi-agent-systems in production. Preprints. Vienna, 1999. (Page: 191-195)

Evaluation and compare of novel production paradigms and their control architectures.

Authors: Ilie-Zudor, A; Monostori, L; Kádár, B; Liszka, L
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 151-156)

Genetic programming for feature extraction in financial forecasting.

Authors: Hornyák, J; Monostori, L
Date: 1999.
Published by: ERCIM NEWS (Volume no.: 38, Page: 10-11)

An intelligent AE sensor for the monitoring of finish machining process.

Authors: Dolinsek, S; Kopac, J; Viharos, ZSJ; Monostori, L
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 2. (Page: 847-853)

Alapvető mesterséges intelligencia technikák. (Fundamental artificial intelligence techniques.)

Authors: Váncza, J; Monostori, L; Egresits, CS
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 1-27)

Sensor integration, state and situation recognition, learning in intelligent manufacturing.

Authors: Monostori, L
Date: 1998.
Published by: Proceedings of the fourth international symposium on measurment technology and intelligent instruments. Miskolc-Lillafüred, 1998. (Page: 109-115)

Editorial to the special issue on soft computing approaches to manufacturing.

Authors: Monostori, L
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 4, Page: 279-280)

Editorial to the special issue of the Journal of Intelligent Manufacturing on agent-based manufacturing.

Authors: Monostori, L
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 95-96)

Artificial intelligence and machine learning techniques for control and monitoring of manufacturing processes.

Authors: Monostori, L
Date: 1998.
Published by: IPMM'97. Australiasia-pacific forum on intelligent processing and manfacturing of materials. Gold Coast, 1997. Vol. 1. (Page: 18-28)

Management of changes nad disturbances in manufacturing systems.

Authors: Monostori, L; Szelke, E; Kádár, B
Date: 1998.
Published by: ANNUAL REVIEWS IN CONTROL (Volume no.: 22, Page: 85-97)

Agent-based control of novel and traditional production systems.

Authors: Kádár, B; Monostori, L
Date: 1998.
Published by: ICME 98. CIRP international seminar on intelligent computation in manufacturing engineering. Proceedings. Capri, 1998. (Page: 31-38)

Agent based architectures for mastering changes and disturbances in manufacturing.

Authors: Monostori, L; Kádár, B
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applictions of artficial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol.2. (Lecture not) (Page: 755-764)

Management of changes and disturbances in production systems.

Authors: Monostori, L; Kádár, B; Hornyák, J
Date: 1998.
Published by: LSS '98 Large scale systems: theory and applications. 8th IFAC/IFORS/IMACS/IFIP symposium. Preprints. Rio Patras, 1998. Vol. 1. (Page: 313-318)

Approaches to managing changes and uncertainties in manufacturing.

Authors: Monostori, L; Kádár, B; Hornyák, J
Date: 1998.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 47, Issue no.: 1, Page: 365-368)

Novel approaches to production planning and control.

Authors: Monostori, L; Hornyák, J; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems. Lausanne, 1998 (Page: 115-132)

Soft computing and hybrid AI approaches to intelligent manufacturing.

Authors: Monostori, L; Hornyák, J; Egresits, CS; Viharos, ZSJ
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applications of artificial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol. 2. (Lecture) (Page: 765-774)

Intelligens gyártórendszerek: a kutatás és a nemzetközi együttmőködés új paradigmája. (Intelligent manufacturing systems: new paradigm in research and international co-operation.)

Authors: Monostori, L
Date: 1998.
Published by: GYÁRTÁSTECHNOLÓGIA (Volume no.: 38, Issue no.: 1, Page: 17-18)

Quality-oriented, comprehensive modelling of machining processes.

Authors: Markos, S; Viharos, ZSJ; Monostori, L
Date: 1998.
Published by: 6th international symposium "metrology for quality control in production". 6th IMEKO symposium. Proceedings. Vienna, 1998. (Page: 67-74)

An object-oriented framework for developing distributed manfacturing architectures.

Authors: Kádár, B; Monostori, L; Szelke, E
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 173-179)

Genetic algorithms for predictive and reactive scheduling in manufacturing systems.

Authors: Hornyák, J; Monostori, L
Date: 1998.
Published by: ICME 98. CIRP international seminar on intelligent computation in manufacturing engineering. Proceedings. Capri, 1998. (Page: 213-220)

Multistrategy learning approaches to generate and tune fuzzy control structures and their application in manufacturing.

Authors: Egresits, CS; Monostori, L; Hornyák, J
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 4, Page: 323-329)

Hierarchy in distributed shop floor control.

Authors: Bongaerts, L; Monostori, L; McFarlane, D; Kádár, B
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems, Lausanne, 1998. (Page: 97-113)

Optimization of process chains by artificial neuronal networks and genetic algorithms using quality control charts.

Authors: Viharos, ZS; Monostori, L
Date: 1997.
Published by: Proceedings of the 8th international DAAAM symposium. Intelligent manufacturing and automation. Dubrovnik, 1997. (Page: 353-354)

Management of changes and disturbances in manufacturing systems.

Authors: Monostori, L; Szelke, E; Kádár, B
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 27-38)

Intelligent techniques for management of changes and disturbances in manufacturing.

Authors: Monostori, L; Szelke, E; Kádár, B
Date: 1997.
Published by: CIRP international symposium. Advanced design and manufacture in the global manufacturing era. Hong Kong, 1997. Vol. 1. (Page: 67-75)

A termelés-informatika fejlődési tendenciái.

Authors: Monostori, L; Kádár, B; Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 505-527)

Distributed manufacturing, extended enterprises.

Authors: Monostori, L; Kádár, B
Date: 1997.
Published by: ERCIM NEWS (Issue no.: 30, Page: 35-36)

ANN and hybrid AI approaches to financial and business problems.

Authors: Monostori, L; Hornyák, J; Egresits, CS
Date: 1997.
Published by: NEURAL NETWORK WORLD (Volume no.: 7, Issue no.: 4-5, Page: 495-506)

On hybrid learning and its application in intelligent manufacturing.

Authors: Monostori, L; Egresits, CS
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 111-117)

Felügyeleti és diagnosztikai rendszerek.

Authors: Monostori, L; Egresits, CS
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 316-348)

On the application of multistrategy learning and hybrid AI approaches in intelligent manufacturing.

Authors: Monostori, L
Date: 1997.
Published by: 4th IFAC workshop on intelligent manufacturing systems. IMS '97. Preprints. Seoul, 1997. (Page: 249-254)

An object oriented framework for developing distributed manufacturing architectures.

Authors: Kádár, B; Monostori, L; Szelke, E
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 548-554)

A simulation framework for development and evaluation of agent based manufacturing architectures.

Authors: Kádár, B; Monostori, L
Date: 1997.
Published by: DYCOMANS workshop IV. Control and management in computer integrated systems. Preprints. Zakopane, 1997. (Page: 59-65)

Shop floor control architectures for the extended enterprise.

Authors: Janusz, B; Bongaerts, L; Gullander, P; Klingstam, P; Monostori, L; Jordan, P
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-2)

A feature extraction technique for ANN-based financial forecasting.

Authors: Hornyák, J; Monostori, L
Date: 1997.
Published by: NEURAL NETWORK WORLD (Volume no.: 7, Issue no.: 4-5, Page: 543-552)

Simulation and novel control techniques for re-engineering purposes.

Authors: Gödri, I; Monostori, L
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 403-408)

Multistrategy learning approaches to generate and tune fuzzy control structures and their applications in manufacturing.

Authors: Egresits, CS; Monostori, L; Hornyák, J
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 88-94)

Genetic algorithms for automatic design of fuzzy decision systems for intelligent manufacturing.

Authors: Egresits, CS; Monostori, L
Date: 1997.
Published by: 3rd IFAC symposium on intelligent components and instruments for control applications. SICICA '97. Preprints. Annecy, 1997. (Page: 603-608)

Approaches to coupling connectionist and expert systems in intelligent manufacturing.

Authors: Barschdorff, D; Monostori, L; Wöstenkühler, GW; Egresits, CS; Kádár, B
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 5-15)

Design and real-time reconfiguration of robust manufacturing systems by using design of experiments and artificial neural networks.

Authors: Mezgár, I; Egresits, CS; Monostori, L
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 33, Page: 61-70)

Mesterséges intelligencia módszerek.

Authors: Váncza, J; Monostori, L; Egresits, CS
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 162-237)

Investigation of machined surfaces using artificial intelligence methods.

Authors: Szalay, T; Alpek, F; Monostori, L; Markos, S; Viharos, ZJ
Date: 1996.
Published by: Proceedings of the IXth international conference on cutting tools. IX. nemzetközi szerszámkonferencia. Miskolc, 1996. (Page: 635-640)

Fertigungsparameter schätzung zur vorgeschriebenen Oberflächenqualität mittels neuronaler Netze..

Authors: Osanna, PH; Monostori, L; Alpek, F; Viharos, ZJ
Date: 1996.
Published by: Proceedings of the 7th International DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 311-312)

Hybrid AI solutions and their application in manufacturing.

Authors: Monostori, L; Egresits, CS; Kádár, B
Date: 1996.
Published by: Industrial and engineering applications of artificial intelligence end expert systems. IEA/AIE 96. Proceedings of the ninth international conference. Fukuoka, 1996. (Page: 469-478)

From pattern recognition techniques through artificial neural networks to hybrid AI solutions in manufacturing.

Authors: Monostori, L
Date: 1996.
Published by: Proceedings of the Japan-USA symposium on flexible automation. Boston, 1996. Vol. 2. (Page: 1453-1460)

Knowledge based reactive management of manufacturing cells.

Authors: Kádár, B; Markos, S; Monostori, L
Date: 1996.
Published by: IT and manufacturing partnerships. Delivering the promise. Proceedings of the conference on integration in manufacturing. Galwai, 1996.( Advances in design and manufacturing, 7.) (Page: 197-205)

Knowledge based monitoring and management of manufacturing cells.

Authors: Kádár, B; Markos, S; Monostori, L
Date: 1996.
Published by: Management and control: tools and action. DYCOMANS workshop II. Algarve, 1996. (Page: 83-88)

An integrated approach to design, manufacturing and assembly/disassembly.

Authors: Gödri, I; Monostori, L
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 125-126)

Generation and tuning of fuzzy control structures using genetic algorithms and neural learning.

Authors: Egresits, CS; Hornyák, J; Monostori, L
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 115-116)

A coupled system for re-engineering of robust manufacturing system configurations.

Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL
Date: 1996.
Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64)

A market approach to holonic manufacturing.

Authors: Márkus, A; Kis, T; Váncza, J; Monostori, L
Date: 1996.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 45, Issue no.: 1, Page: 433-436)

Reactive and proactive scheduling with learning in reactive operation management

Authors: Szelke, E; Monostori, L
Date: 1995.
Published by: IFIP working conference on managing concurrent manufacturing to improve industrial performance. Conference proceedings. Seattle, 1995 (Page: 456-483)

Intelligent manufacturing with reactive/proactive scheduling and learning for dynamic operation management

Authors: Szelke, E; Monostori, L
Date: 1995.
Published by: Industrial control and management methods: theory and practice. DYCOMANS's workshop. Preprints. Prague, 1995 (Page: 89-96)

Virtual manufacturing using a hierarchically coupled hybrid AI system

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 369-374)

Virtual manufacturing by coupling connectionist and expert systems

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: 6th international DAAAM symposium. Proceedings. Krakow, 1995. Krakow, Politechnika Krakowska, 1995 (Page: 231-232)

On hybrid learning and its application in intelligent manufacturing

Authors: Monostori, L; Egresits, CS
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 655-670)

Hybrid AI approaches to control and monitoring of manufacturing processes

Authors: Monostori, L
Date: 1995.
Published by: Manufacturing systems: adaptive control and management. DYCOMANS special session at ACASP symposium. Budapest, 1995 (Page: 23-33)

Hybrid AI approaches for supervision and control of manufacturing processes

Authors: Monostori, L
Date: 1995.
Published by: AC' 95. IV International conference on monitoring and automation supervision in manufacturing. Miedzeszyn, 1995 (Page: 37-47)

Hybrid AI approaches for intelligent manufacturing

Authors: Monostori, L
Date: 1995.
Published by: European software days. Budapest, 1995 (Page: 142-144)

Coupling expert systems and artificial neural networks: a hybrid AI solution and its application in manufacturing

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: microCAD' 95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 69-72)

Connectionist and neuro-fuzzy techniques in intelligent manufacturing

Authors: Monostori, L
Date: 1995.
Published by: The first world congress on intelligent manufacturing processes & systems. Proceedings. Mayagüez-San Juan, 1995. Vol. 2. (Page: 940-949)

Application of hybrid AI techniques in manufacturing

Authors: Monostori, L; Kádár, B; Egresits, CS
Date: 1995.
Published by: CAMP '95. CAD/CAM and multimedia. 5th international conference and trade show. Budapest, 1995 (Page: 52-62)

HYBEXP: a hierarchically coupled hybrid AI approach to production control

Authors: Kádár, B; Egresits, CS; Monostori, L
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 94-101)

Neuro-fuzzy systems as hybrid AI solutions to diagnostic problems

Authors: Egresits, CS; Monostori, L
Date: 1995.
Published by: Acoustical and vibratory surveillance methods and diagnostic techniques. 2nd international conference. Senlies, 1995 (Page: 817-825)

NEURECA: an ANN based system for monitoring and control of industrial processes

Authors: Egresits, CS; Monostori, L
Date: 1995.
Published by: microCAD'95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 65-68)

Combined structure and parameter learning for control applications

Authors: Egresits, CS; Monostori, L
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 73-80)

Approaches to coupling connectionist and expert systems in intelligent manufacturing

Authors: Barschdorff, D; Monostori, L; Wörstenkühler, GW; Egresits, CS; Kádár, B
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 591-608)

Re-engineering of robust manufacturing system configurations

Authors: Mezgár, I; Egresits, CS; Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 261-280)

Some results in neuro-fuzzy monitoring of manufacturing processes

Authors: Monostori, L
Date: 1994.
Published by: 5th international DAAAM symposium. Maribor, 1994 (Page: 285-286)

On the application of hybrid AI techniques in manufacturing

Authors: Monostori, L; Egresits, C; Zsoldos, L
Date: 1994.
Published by: microCAD'94. International computer science conference. Miskolc, 1994 (Page: 15-22)

Monitoring of manufacturing processes by ANN and neuro-fuzzy techniques

Authors: Monostori, L
Date: 1994.
Published by: Proceedings of the XIII. IMEKO world congress: from measurement to innovation. Torino, 1994. Vol. 3. (Page: 2226-2231)

Modelling and monitoring of milling through neuro-fuzzy techniques

Authors: Monostori, L; Egresits, C
Date: 1994.
Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 381-386)

Combining neural and fuzzy techniques in monitoring and control of manufacturing processes

Authors: Monostori, L
Date: 1994.
Published by: SICICA'94. Intelligent components and instruments for control applications. Preprints. Budapest, 1994 (Page: 199-204)

NEURECA: an object oriented system under Windows for ANN based monitoring and control of industrial processes

Authors: Egresits, C; Monostori, L
Date: 1994.
Published by: 5th international DAAAM symposium. Maribor, 1994 (Page: 113-114)

Monitoring of the milling process through neural network and fuzzy techniques

Authors: Markos, S; Monostori, L; Nacsa, J; Szöllősi, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 239-250)

A step towards intelligent manufacturing: modelling and monitoring of manufacturing processes through artificial neural networks

Authors: Monostori, L
Date: 1993.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Volume no.: 42, Issue no.: 1, Page: 485-488)

Neuro-fuzzy modelling and monitoring of manufacturing processes

Authors: Monostori, L
Date: 1993.
Published by: Proceedings of the 4th international DAAAM symposium. Brno, 1993 (Page: 197-198)

Intelligent manufacturing through neural networks

Authors: Monostori, L
Date: 1993.
Published by: Intelligent autonomous systems (IAS-3) Proceedings of the international conference Pittsburgh, 1993 (Page: 328-337)

Wear estimation and state classification of cutting tools in turning via artificial neural networks

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1993.
Published by: International conference on fault diagnosis (TOOLDIAG'93) Toulouse 1993. Proceedings (Page: 669-677)

Cutting tool monitoring in turning under varying cutting conditions; an artificial neural network approach

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1993.
Published by: Industrial and engineering applications of artificial intelligence and expert systems (IEA/AIE 93) Proceedings of the sixth international conference, Edinburgh, 1993 (Page: 353-359)

Symbolicism and connectionism: rivals or allies in intelligent manufacturing?

Authors: Barschdorff, D; Monostori, L
Date: 1992.
Published by: MANUFACTURING SYSTEMS (Volume no.: 21, Issue no.: 3, Page: 193-199)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik

Authors: Kottenstede, T; Monostori, L; Müller, M; Rosenberger, U
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik (Page: 34)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik

Authors: Barschdorff, D; Monostori, L; Kottenstede, T; Warnecke, G; Müller, M
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik (Page: 100)

The role of artificial neural networks in intelligent manufacturing

Authors: Monostori, L
Date: 1992.
Published by: Flexible und Intelligente Automation, 3. Internationales Symposium von DAAAM. Budapest, 1992 (Page: 115-116)

Neural networks for modelling and monitoring of manufacturing processes; milling

Authors: Monostori, L; Markos, S; Krämer, S; Nacsa, J; Szöllősi, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Proceedings of the 8th IMEKO Symposium on Technical Diagnostics Dresden, 1992 (Page: 502-512)

Convergence behaviour of connectionist models in large scale diagnostic problems

Authors: Monostori, L; Bothe, A
Date: 1992.
Published by: Industrial engineering applications of artificial intelligence and expert systems. Proceedings of the 5th international conference, IEA/AIE-92. Paderborn, 1992(Lecture notes in artificial intelligence 604) (Page: 113-122)

Artificial neural networks in intelligent manufacturing

Authors: Monostori, L; Barschdorff, D
Date: 1992.
Published by: ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (Volume no.: 9, Issue no.: 6, Page: 421-437)

Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)

Authors: Barschdorff, D; Monostori, L; Aron, R; Bothe, A; Kottenstede, T; Wöstenkühler, W
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.) (Page: 21)