Jump to content

EU Centre of ExcellenceISO 9001

ERCIMW3C MemberFraunhofer Project Center

László Monostori, head of laboratory
László Monostori
Address: 1111 Budapest, Kende u. 13-17.
Room number: K 115
Phone: +36 1 279 6159
E-mail: monostori.laszloEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.mta.hu
Homepage: http://www.emi.sztaki.hu/monostori
Department: Research Laboratory on Engineering & Management Intelligence

Cirruculum Vitae

Up-to-date Publication and Citation list

.

Publications

[order by time] [order by categories ]

2013.

The role of OSC-based projects in meeting new challenges of education - concept and exemplification
Authors: Ilie Zudor, Angyalka; Kemény, Zsolt; Szathmári, Marcell; Monostori, László
Date: 2013.
Published by: COMPUTER APPLICATIONS IN ENGINEERING EDUCATION (Issue no.: S, Page: E)
A local-search-based solution for milkrun logistics optimization
Authors: Gyulai, Dávid; Monostori, László
Editor: S, n
Date: 2013.
Published by: Factory Automation 2013 (Page: 1)
Methodology and data-structure for a uniform system’s specification in a simulation project
Authors: Kardos, Csaba; Popovics, Gergely; Kádár, Botond Géza; Monostori, László
Date: 2013.
Published by: PROCEDIA CIRP (Page: 4)
ISA standard simulation model generation supported by data stored in low level controllers
Authors: Popovics, Gergely; Monostori, László
Date: 2013.
Published by: PROCEDIA CIRP (Page: 4)
Generating alternative process plans for complex parts
Authors: Nonaka, Y; Erdős, Ferenc Gábor; Kis, Tamás; Kovács, András; Monostori, László; Nakano, T; Váncza, József
Date: 2013.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 4)

2012.

Modeling and simulation of production systems supported by a virtual factory framework
Authors: Terkaj, W; Urgo, M; Kádár, Botond Géza; Popovics, Gergely; Kemény, Lőrinc
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 3)
Matching demand and system structure in reconfigurable assembly systems
Authors: Gyulai, Dávid; Vén, Zoltán; Pfeiffer, András; Váncza, József; Monostori, László
Date: 2012.
Published by: 45th CIRP Conference on Manufacturing Systems, 16-18 May 2012 Athens, University of Patras. Proceedings (Page: 6)
Matching Demand and System Structure in Reconfigurable Assembly Systems
Authors: Gyulai, Dávid; Vén, Zoltán; Pfeiffer, András; Váncza, József; Monostori, László
Date: 2012.
Published by: PROCEDIA CIRP (Page: 5)
Nonlinear model predictive ramp control for multicriteria traffic optimization
Authors: Csikós, Alfréd András; Varga, István
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 5)
QC2 Loop Editor: The Metholology and the Tool for Closing Quality Loops of Manufacturing Enterprises
Authors: Viharos, Zsolt János; Monostori, László; Csempesz, János; Schmitt, R; Glöckner, H; Stiller, S; Markos, S
Editor: Pannon, University
Date: 2012.
Published by: Proceedings of the Factory Automation 2012 (Page: 6)
Urban road traffic estimation based on cellular signaling data
Authors: Tettamanti, Tamás; Varga, István
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 2)
Uniform data structure for production simulation
Authors: Popovics, Gergely; Kardos, Csaba; Kemény, Lőrinc; Gyulai, Dávid; Monostori, László
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 1)
Travel time estimation in urban road traffic networks based on radio signaling data
Authors: Ludvig, Á; Tettamanti, Tamás; Varga, István
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 5)
MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Integration of incremental sheet forming with an adaptive control into cloud manufacturing
Authors: Paniti, Imre; Rauschecker, U
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 1)
Complexity in engineering design and manufacturing
Authors: ElMaraghy, W; ElMaraghy, H; Tomiyama, T; Monostori, László
Date: 2012.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 7)
Automatic simulation model generation supported by data stored in low level controllers
Authors: Popovics, Gergely; Kardos, Csaba; Pfeiffer, András; Kádár, Botond Géza; Vén, Zoltán; Monostori, László
Editor: Borangiu, T; Dolgui, A
Date: 2012.
Published by: INCOM 2012. 14th IFAC Symposium on Information Control Problems in Manufacturing. Bucharest, 23-25 May, 2012 (Page: T)
Automatic simulation model generation based on PLC codes and MES stored data
Authors: Popovics, Gergely; Pfeiffer, András; Kádár, Botond Géza; Vén, Zoltán; Kemény, Lőrinc; Monostori, László
Date: 2012.
Published by: PROCEDIA CIRP (Page: 7)
Definition and handling of data types in a dataflow-oriented modelling and processing environment
Authors: Karnok, Dávid; Kemény, Zsolt
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 5)
Design and assessment of quality control loops for stable business processes
Authors: Schmitt, R; Monostori, László; Glöckner, H; Viharos, Zsolt János
Date: 2012.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 4)
Framework for building and coordinating information flows in logistics networks
Authors: Karnok, Dávid; Kemény, Zsolt
Editor: Ilie Zudor, Angyalka; Kemény, Zsolt; Monostori, László
Date: 2012.
Published by: MITIP 2012. 14th International Conference on Modern Information Technology in the Innovation Processes of the Industrial Enterprises. Proceedings volume (Page: 5)
Execution data connected simulation for production operation planning and control
Authors: Kádár, Botond Géza; Pfeiffer, András; Monostori, László
Editor: Borangiu, T; Dolgui, A
Date: 2012.
Published by: INCOM 2012. 14th IFAC Symposium on Information Control Problems in Manufacturing. Bucharest, 23-25 May, 2012 (Page: W)
Applying model-reconstruction by exploring MES and PLC data for simulation support of production systems
Authors: Pfeiffer, András; Kádár, Botond Géza; Popovics, Gergely; Kardos, Csaba; Vén, Zoltán; Kemény, Lőrinc; Monostori, László
Editor: C, Laroque; J, Himmelspach; R, Pasupathy; O, Rose; A, M
Date: 2012.
Published by: Proceedings of the 2012 Winter Simulation Conference (Page: 1)

2011.

Scheduling the maintenance of wind farms for minimizing production loss
Authors: Kovács, András; Erdős, Ferenc Gábor; Monostori, László; Viharos, Zsolt János
Editor: Bittanti, ; Sergio, ; Cenedese, ; Angelo, ; Zampieri, ; Sandro,
Date: 2011.
Published by: 18th World Congress of the International Federation of Automatic Control (Page: 1)
Quantifiable closed quality control (QC2).
Authors: Viharos, Zsolt János; Monostori, László; Schmitt, R; Glöckner, H; Stiller, S; Markos, S
Editor: Nagy, Zoltán
Date: 2011.
Published by: Factory Automation 2011 Conference (Page: 2)
PLC code processing for automatic simulation model generation
Authors: Popovics, Gergely; Pfeiffer, András; Kádár, Botond Géza; Vén, Zoltán; Monostori, László
Date: 2011.
Published by: Proceedings of the 10th International Conference on Modeling and Applied Simulation (MAS 2011) (Page: 1)
Simulation-based evaluation of production control decisions in large-scale manufacturing
Authors: Popovics, Gergely; Pfeiffer, András; Kádár, Botond Géza; Monostori, László
Editor: Nagy, Zoltán
Date: 2011.
Published by: Factory Automation 2011 Conference (Page: 1)
WindMT: An integrated system for failure detection and maintenance scheduling at wind farms
Authors: Kovács, András; Csempesz, János; Erdős, Ferenc Gábor; Karnok, Dávid; Kemény, Lőrinc; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: ICAPS 2011, The 21st International Conference on Automated Planning and Scheduling, Proceedings of System Demonstrations (Page: 4)
A system for the detailed scheduling of wind farm maintenance
Authors: Kovács, András; Erdős, Ferenc Gábor; Viharos, Zsolt János; Monostori, László
Date: 2011.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 4)
A survey of applications and requirements of unique identification systems and RFID techniques
Authors: Ilie Zudor, Angyalka; Kemény, Zsolt; van, Blommestein; Monostori, László; van, der
Date: 2011.
Published by: COMPUTERS IN INDUSTRY (Page: 2)
Újrakonfigurálható gyártórendszerek rugalmassági mutatója
Authors: Vén, Zoltán; Popovics, Gergely; Pfeiffer, András; Monostori, László
Editor: Bitay, Enikő
Date: 2011.
Published by: Fiatal Műszakiak Tudományos Ülésszaka (Page: 3)
Novel IT solutions for increasing transparency in production and in supply chains
Authors: Monostori, László; Ilie Zudor, Angyalka; Kádár, Botond Géza; Karnok, Dávid; Pfeiffer, András; Kemény, Zsolt; Szathmári, Marcell
Editor: Spath, D; Ilg, R; Krause, T
Date: 2011.
Published by: Proceedings of the 21st International Conference on Production Research, ICPR 21 (Page: 1)
How transparency can increase performance of production: Novel approaches and solutions (Abstract)
Authors: Monostori, László; Váncza, József
Date: 2011.
Published by: Factory Automation 2011 Conference, Győr, Hungary (Page: 1)
Cooperative and responsive manufacturing enterprises
Authors: Váncza, József; Monostori, László; Lutters, D; Kumara, S; Tseng, M; Valckenaers, P; Van, Brussel
Date: 2011.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 7)
Co-analysing situations and production control rules in a large-scale manufacturing environment
Authors: Kádár, Botond Géza; Pfeiffer, András; Monostori, László; Popovics, Gergely; Vén, Zoltán
Date: 2011.
Published by: The 44th CIRP International Conference on Manufacturing Systems - New Worlds of Manufacturing
Quantifiable closed quality control (QC2)
Authors: Viharos, Zsolt János; Monostori, László; Schmitt, R.; Glöckner, H.; Stiller, S.; Markos, S.
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 2)
Designing closed quality control loops for stable production systems
Authors: Schmitt, R; Glöckner, H; Stiller, S; Monostori, László; Viharos, Zsolt János
Date: 2011.
Published by: Navigating Global Quality in a New Era. 55th EOQ Congress as World Quality Congress (Page: &)
Determination of routings and process time information from event logs
Authors: Karnok, Dávid; Monostori, László
Editor: Bittanti, ; Sergio, ; Cenedese, ; Angelo, ; Zampieri, ; Sandro,
Date: 2011.
Published by: 18th World Congress of the International Federation of Automatic Control (Page: 1)
Extracting process time information from large-scale noisy manufacturing event logs
Authors: Karnok, Dávid; Monostori, László
Date: 2011.
Published by: The 44th CIRP International Conference on Manufacturing Systems - New Worlds of Manufacturing
Engineering education on supply-chain management for students and for employees in industry
Authors: Ilie Zudor, Angyalka; Macchi, M; Monostori, László; Scotti, S; Kemény, Zsolt
Date: 2011.
Published by: COMPUTER APPLICATIONS IN ENGINEERING EDUCATION (Page: 8)
Eco-labelling for sustainable manufacturing. (Abstract)
Authors: Váncza, József; Monostori, László
Editor: Nagy, Zoltán
Date: 2011. 05. 25.
Published by: Factory automation 2011 conference. Győr, 2011. (Page: 1)

2010.

Towards adaptive and digital manufacturing
Digital enterprise solution for integrated production planning and control
Authors: Monostori, László; Erdős, Ferenc Gábor; Kádár, Botond; Kis, Tamás; Kovács, András; Pfeiffer, András; Váncza, József
Date: 2010.
Published by: Computers in Industry (Page: 1)
Enhanced control of complex production structures by tight coupling of the digital and the physical worlds
Authors: Kádár, Botond; Lengyel, A.; Monostori, László; Suginishi, Y.; Pfeiffer, András; Nonaka, Y.
Date: 2010.
Published by: CIRP Annals - Manufacturing Technology (Page: 4)
Simulation supported situation detection for real-time production control
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2010. 04. 15.
Published by: Factory automation 2010. Proceedings. Kecskemét, 2010. (Page: 7)
AI supported maintenance and reliability system in wind energy production
Authors: Viharos, Zsolt János; Monostori, László; Erdős, Ferenc Gábor; Kovács, András
Date: 2010. 04. 20.
Published by: EWEC 2010. European wind energy conference and exhibition. Warsaw, 2010. (Page: 1)
Artificial intelligence applications for maintenance oriented health monitoring of wind turbines
Authors: Viharos, Zsolt János; Erdős, Ferenc Gábor; Kovács, András; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 4)
Market power analysis for varied concentration in a first-price auction based multiagent supply chain
Authors: Dorronsoro, Pablo; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 3)
Novel approaches for better transparency in large-scale manufacturing environment by using process mining
Authors: Karnok, Dávid; Monostori, László
Date: 2010. 05. 25.
Published by: Gépészet 2010. Proceedings of the 7th conference on mechanical engineering. Budapest, 2010. (Page: 9)
Routing model refinement in large-scale manufacturing environment by using data mining
Authors: Karnok, Dávid; Monostori, László
Editor: Sihn, W.; Kuhlang, P.
Date: 2010. 05. 26.
Published by: 43rd CIRP international conference on manufacturing systems. Sustainable production and logistics in global networks. Proceedings. Vienna, 2010. (Page: 7)

2009.

Real-time, cooperative enterprises for customised mass production
Authors: Monostori, László; Kis, Tamás; Váncza, József; Kádár, Botond; Erdős, Ferenc Gábor
Date: 2009.
Published by: International Journal of Computer Integrated Manufacturing (Page: 5)
Real-time, cooperative enterprises: Results of an industry - academia project
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2009.
Published by: Journal of Machine Manufacturing (Issue no.: E, Page: 8)
Self-building simulation tool for daily decision support in production control
Authors: Pfeiffer, András; Kádár, Botond; Szathmári, Marcell Ferenc; Popovics, Gergely; Vén, Zoltán; Monostori, László
Date: 2009.
Published by: MAS 2009. International workshop on modelling & applied simulation. Puerto de La Cruz, 2009. (Page: 2)
Value creation and decision-making in sustainable society
Authors: Ueda, K.; Takenaka, T.; Váncza, József; Monostori, László
Date: 2009.
Published by: CIRP Annals-Manufacturing Technology (Page: 6)
Novel approaches for better transparency in production and supply chains
Authors: Karnok, Dávid; Monostori, László
Date: 2009.
Published by: 42nd CIRP conference on manufacturing systems. Sustainable development of manufacturing systems. Grenoble, 2009. (Page: 1)
Increased transparency within and beyond organizational borders by novel identifier-based services for enterprises of different size
Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Szathmári, Marcell Ferenc; Karnok, Dávid
Date: 2009.
Published by: CIRP Annals-Manufacturing Technology (Page: 4)
AI supported maintenance and reliability system in wind energy production
Authors: Monostori, László; Viharos, Zsolt János; Erdős, Ferenc Gábor; Kovács, András
Editor: Burczynski, T.; Cholewa, W.; Moczulski, W.
Date: 2009.
Published by: AI-METH 2009. Artificial intelligence methods. Symposium proceedings. Gliwice, 2009. (AI-METH series.)
Adaptive approaches to distributed resource allocation
Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2009.
Published by: Production Systems and Information Engineering (Page: 3)
Agent-based framework for pre-contractual evaluation of participants in project-delivery supply-chains
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2009.
Published by: Assembly Automation (Page: 1)
From tracking operations to IOT - The small business perspective
Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Editor: Grau, A.; Campos, J.; Oliver, G.
Date: 2009.
Published by: ETFA 2009. 14th IEEE international conference on emerging technologies and factory automation. Palma de Mallorca, 2009. (Page: 1)
Novel IT approaches and solutions towards real-time, cooperative enterprises. Plenary paper
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2009. 06. 05.
Published by: INCOM 2009. 13th IFAC symposium on information control problems in manufacturing. Preprints. Moscow, 2009. (Page: 7)

2008.

TraSer: an open-source solution platform for cross-company transparency in tracking and tracing
Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 4)
Situation detection in production control by applying on-line simulation
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2008.
Published by: DET 2008. 5th international conference on digital enterprise technology. Nantes, 2008. (Page: 1)
Simulation as one of the core technologies for digital enterprises: assessment of hybrid rescheduling methods
Value function based reinforcement learning in changing Markovian environments
Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2008.
Published by: Journal of Machine Learning Research (Page: 1)
Valós időben együttműködő vállalatok: egy ipari-akadémiai projekt eredményei
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Karnok, Dávid; Drótos, Márton; Egri, Péter
Date: 2008.
Published by: Gépgyártás (Page: 1)
A low-cost perspective in identifier-based services of supply chains
Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Monostori, László; Langius, Erik A. F.
Date: 2008.
Published by: EFTA 2008. 13th IEEE international conference on emerging technologies and factory automation. Hamburg, 2008. (Page: 1)
A coordination mechanism for rolling horizon planning in supply networks
Authors: Váncza, József; Egri, Péter; Monostori, László
Date: 2008.
Published by: CIRP Annals-Manufacturing Technology (Page: 4)
A complexity model for networks of collaborating enterprises
Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 1)
Real-time, cooperative enterprises for customized mass production; challenges and solution approaches
Authors: Monostori, László; Váncza, József; Kis, Tamás; Erdős, Ferenc Gábor; Karnok, Dávid; Egri, Péter
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 1)
Logistics platform: developing a distributed, cooperative production and logistics system
Authors: Karnok, Dávid; Monostori, László
Date: 2008.
Published by: Gépészet 2008. Proceedings of 6th conference on mechanical engineering. Budapest, 2008. (Page: 1)
Complexity-based modeling of reconfigurable collaborations in production industry
Authors: Schuh, G.; Monostori, László; Csáji, Balázs Csanád; Döring, S.
Date: 2008.
Published by: CIRP Annals-Manufacturing Technology (Page: 4)
Complex adaptive systems (CAS) approach to production systems and organisations
Authors: Monostori, László; Csáji, Balázs Csanád
Editor: Mitsuishi, Mamoru; Ueda, Kanji; Kimura, Fumihiko
Date: 2008.
Published by: 41st CIRP conference on manufacturing systems and technologies for the new frontier. Tokyo, 2008. (Page: 1)
Advances in e-manufacturing, e-logistics, and e-service systems
Authors: Nof, S. Y.; Filip, F. G.; Molina, A.; Monostori, László; Pereira, C. E.
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 5)
Digital manager: developing a support system for real-time production evaluation
Authors: Karnok, Dávid; Monostori, László
Date: 2008.
Published by: Gépészet 2008. Proceedings of 6th conference on mechanical engineering. Budapest, 2008. (Page: 1)
Identity-based tracking and Web services for SMEs
Authors: Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Monostori, László
Editor: Blecker, Thorsten; Huang, George Q.
Date: 2008.
Published by: RFID in operations and supply chain management. Research and applications. (Operations and technology management 6.) (Page: 1)
Komplexität der Bedarfsprognosen und ihre Wirkungen in kooperativen Logistiknetzwerken
Identity-based, item-centric tracking platform for logistics applications
Authors: Ilie-Zudor, Angyalka Elisabeth; Szathmári, Marcell Ferenc; Kemény, Zsolt; Karnok, Dávid; Monostori, László
Date: 2008.
Published by: HMS 2008. International workshop on harbour, martime and multimodal logistics modeling and simulation. Campora S. Giovanni, 2008. (Page: 1)
Adaptive stochastic resource control: a machine learning approach
Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2008.
Published by: Journal of Artificial Intelligence Research (Page: 4)

2007.

Simulation-based monitoring and validation of production control decisions
Simulating the manufacturing execution system: interactions with the workers and managers
Simulation-based validation of production control decisions, subject to resource availability
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Editor: Bruzzone, A. G.; Longo, F.; Merkuryev, Y.; Piera, M. A.
Date: 2007.
Published by: I3M2007. International Mediterranean modelling multiconference. EMSS 2007. 19th European modelling and simulation symposium. Bergeggi, 2007. (Page: 1)
Solution approaches to real-time control of customized mass production
Authors: Monostori, László; Kádár, Botond; Pfeiffer, András; Karnok, Dávid
Date: 2007.
Published by: CIRP Annals-Manufacturing Technology (Page: 4)
Stability-oriented evaluation of rescheduling strategies, by using simulation
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2007.
Published by: Computers in Industry (Page: 6)
Real-time, cooperative enterprises: challenges and results of an industry-academia project
Authors: Monostori, László; Salekovics, István; Váncza, József; Kis, Tamás; Kádár, Botond; Farkas, Zoltán
Editor: Monostori, László
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 9)
Real-time, cooperative enterprises for customised mass production
Authors: Monostori, László; Kis, Tamás; Kádár, Botond; Váncza, József; Erdős, Ferenc Gábor
Date: 2007.
Published by: CARV 2007. 2nd international conference on changeable, agile, reconfigurable and virtual production. Proceedings. Toronto, 2007. (Page: 1)
Automatic partitioning of problems through submodel decomposition - a promising technique of digital enterprise technology
Authors: Viharos, Zsolt János; Monostori, László; Kemény, Zsolt
Editor: Cunha, P. F.; Maropoulos, P. G.
Date: 2007.
Published by: Digital enterprise technology. Perspective and future challenges. (Page: 1)
AutoID-based track and trace applications in supply-chains - state-of-the-art and envisaged developments
Authors: Kemény, Zsolt; Ilie-Zudor, Angyalka Elisabeth; Monostori, László; Szathmári, Marcell Ferenc
Date: 2007.
Published by: 40th CIRP international seminar on manufacturing systems. Liverpool, 2007. (Page: 1)
Manufacturing scheduling and control in the extended enterprise
Authors: Monostori, László; Iung, B.
Editor: Taisch, M.; Thoben, K-D.; Montorio, M.
Date: 2007.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 1)
Organizing and running real-time, co-operative enterprises
Authors: Monostori, László; Fornasiero, R.; Váncza, József
Editor: Taisch, M.; Thoben, K-D.; Montorio, M.
Date: 2007.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 1)
Production structures as complex adaptive systems
Authors: Monostori, László; Csáji, Balázs Csanád
Date: 2007.
Published by: 40th CIRP international seminar on manufacturing systems. Liverpool, 2007. (Page: 1)
Modeling networks of collaborating enterprises as complex systems

2006.

Simulating the interaction between the shop floor personnel and the manufacturing execution system
Authors: Karnok, Dávid; Monostori, László; Kádár, Botond
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 4)
Reinforcement learning in a distributed market-based production control system
Authors: Csáji, Balázs Csanád; Monostori, László; Kádár, Botond
Date: 2006.
Published by: Advanced Engineering Informatics (Page: 2)
Real-time, cooperative enterprises: requirements and solution approaches
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Dolgui, A; Morel, G; Pereira, CE
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Preprints. Vol. 1. Saint-Etienne, 2006. (Page: 5)
Real-time, cooperative enterprises: requirements and solution approaches
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Dolgui, A; Morel, G; Pereira, CE
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 1. (Page: 5)
Simulation as one of the core technologies for digital enterprises; assessment of hybrid rescheduling methods
Simulation-based control strategy optimization by using genetic algorithms
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László; Karnok, Dávid
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 4)
Technical monitoring and diagnostics: indispensable element of intelligent manufacturing systems
Authors: Monostori, László; Viharos, Zsolt János
Date: 2006.
Published by: XVIII IMEKO world congress. Metrology for a sustainable development. Proceedings. Rio de Janeiro, 2006. (Page: 1)
Stochastic dynamic production control by neurodynamic programming
Authors: Monostori, László; Csáji, Balázs Csanád
Date: 2006.
Published by: CIRP Annals-Manufacturing Technology (Page: 4)
Stability-oriented evaluation of hybrid rescheduling methods in a job-shop with machine breakdowns
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Page: 5)
Stability-oriented evaluation of hybrid rescheduling methods in a job-shop with machine breakdowns
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Editor: Butala, P; Hlebanja, G
Date: 2006.
Published by: 39th CIRP international seminar on manufacturing systems. The morphology of innovative manufacturing systems. Ljubljana, 2006. (Page: 1)
Real-time, cooperative enterprises: management of changes and disturbances in different levels of production
Authors: Monostori, László; Váncza, József; Márkus, András; Kis, Tamás; Kovács, András; Erdős, Ferenc Gábor; Kádár, Botond; Viharos, Zsolt János
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Page: 3)
Real-time, cooperative enterprises
Authors: Monostori, László; Váncza, József; Kis, Tamás; Kádár, Botond; Viharos, Zsolt János
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 1)
Agent-based systems for manufacturing
Authors: Monostori, László; Váncza, József; Kumara, SRT
Date: 2006.
Published by: CIRP Annals-Manufacturing Technology (Page: 6)
Agent-based approach for building-up efficient value chain networks
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Editor: Butala, P; Hlebanja, G
Date: 2006.
Published by: 39th CIRP international seminar on manufacturing systems. The morphology of innovative manufacturing systems. Ljubljana, 2006. (Page: 4)
Agent-based approach for building-up efficient value chain networks
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2006.
Published by: CIRP Journal of Manufacturing Systems (Page: 2)
Adaptive sampling based large-scale stochastic resource control
Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2006.
Published by: AAAI 2006 - IAAI 2006. 21st national conference on artificial intelligence. 18th conference on innovative applications of artificial intelligence. Boston, 2006. (Page: 8)
Automatic partitioning of problems through submodel decomposition - a promising technique of digital enterprise technology
Authors: Viharos, Zsolt János; Monostori, László; Kemény, Zsolt
Editor: Cunha, PF; Maropoulos, PG
Date: 2006.
Published by: DET 2006. Proceedings of the 3rd CIRP sponsored conference in digital enterprise technology. Setúbal, 2006. (Page: 1)
Design of complex adaptive systems: introduction
Authors: Monostori, László; Ueda, K.
Date: 2006.
Published by: Advanced Engineering Informatics (Page: 2)
The RFID technology and its current applications
Authors: Ilie-Zudor, Angyalka Elisabeth; Kemény, Zsolt; Egri, Péter; Monostori, László
Editor: Monostori, László; Ilie-Zudor Angyalka, Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 2)
Integration of production-, quality- and process monitoring for agile manufacturing
Authors: Viharos, Zsolt János; Kádár, Botond; Monostori, László; Kemény, Zsolt; Csáji, Balázs Csanád; Pfeiffer, András; Karnok, Dávid
Date: 2006.
Published by: XVIII IMEKO world congress. Metrology for a sustainable development. Proceedings. Rio de Janeiro, 2006. (Page: 1)
Identity-based tracking of products and product data in changing networks
Authors: Ilie-Zudor, Angyalka Elisabeth; Fraemling, K.; Holstrom, J.; Monostori, László
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 1)
From plant and logistics control to multi-enterprise collaboration
Authors: Nof, SY; Morel, G.; Monostori, László; Molina, A.; Filip, F.
Date: 2006.
Published by: Annual Reviews in Control (Page: 5)
Adaptive algorithms in distributed resource allocation
Authors: Csáji, Balázs Csanád; Monostori, László
Editor: Ueda, K
Date: 2006.
Published by: IWES 2006. 6th international workshop on emergent synthesis. Tokyo, 2006. (Page: 6)

2005.

Stochastic approximate scheduling by neurodynamic learning
Authors: Csáji, Balázs Csanád; Monostori, László
Editor: Horacek, P; Simandl, M; Zitek, P
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1)
Simulation supported analysis of a dynamic rescheduling system
Authors: Pfeiffer, András; Kádár, Botond; Csáji, Balázs Csanád; Monostori, László
Editor: Chryssolouris, G; Mourtzis, D
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 2)
Real-time, cooperative enterprises: management of changes and disturbances on different levels of production
Authors: Monostori, László; Váncza, József; Márkus, A.; Kis, Tamás; Kovács, András; Erdős, P.; Kádár, Botond; Viharos, Zsolt János
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1)
Stochastic reactive production scheduling by multi-agent based asynchronous approximate dynamic programming
Authors: Csáji, Balázs Csanád; Monostori, László
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Page: 3)
Technical monitoring and diagnostics: prerequisite of intelligent, adaptive manufacturing systems
Authors: Monostori, László
Editor: Monostori, L; Viharos, ZsJ
Date: 2005.
Published by: Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005. (Page: 3)
eSCM: education on supply-chain management on graduate level and within corporations
Authors: Ilie-Zudor, Angyalka Elisabeth; Pinto, R.; Macchi, M.; Monostori, László
Date: 2005.
Published by: WSEAS TRANSACTIONS ON ADVANCES IN ENGINEERING EDUCATION (Page: 6)
Web-based education on graduate level within corporations in the field of supply-chain management
Authors: Ilie-Zudor, Angyalka Elisabeth; Kimmich, J.; Monostori, László
Date: 2005.
Published by: Proceedings of the 5th WSEAS international conference on distance learning and web engineering. Corfu, 2005. (Page: 6)
Production scheduling and control
Authors: Iung, B.; Monostori, László
Editor: Taisch, M; Thoben, K-D
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 1)
Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005
Building agent-based systems in a discrete-event simulation environment
Authors: Kádár, Botond; Pfeiffer, András; Monostori, László
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Page: 5)
Agent-based product life cycle data support
Authors: Niemann, J.; Ilie-Zudor, Angyalka Elisabeth; Monostori, László; Westkämper, E.
Editor: Chryssolouris, G; Mourtzis, D
Date: 2005.
Published by: Manufacturing, modelling, management and control 2004. IFAC conference. Proceedings. Athens, 2004. (Page: 1)
E-learning in the field of supply-chain management on graduate level and within corporations
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2005.
Published by: 38th CIRP international seminar on manufacturing systems. Florianópolis, 2005. (Page: 1)
From plant and logistics control to multi-enterprise collaboration
Authors: Nof, SY; Morel, G.; Monostori, László; Molina, A.; Filip, F.
Editor: Horacek, P; Simandl, M; Zitek, P
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1)
Organizing and running real-time, cooperative enterprises
Authors: Monostori, László; Fornasiero, R.; Váncza, József
Editor: Taisch, M; Thoben, K-D
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 1)
Manufacturing scheduling and control in the extended enterprise
Authors: Iung, B.; Monostori, László
Editor: Taisch, M; Thoben, K-D
Date: 2005.
Published by: Advanced manufacturing: an ICT and systems perspective. (Page: 1)
Adaptive approaches to increasing the performance of production control systems
Authors: Kádár, Botond; Csáji, Balázs Csanád; Monostori, László
Date: 2005.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Page: 3)

2004.

Simulation support for rescheduling
Authors: Pfeiffer, András; Kádár, Botond; Monostori, László
Editor: Lipovszki, GY; Molnár, I
Date: 2004.
Published by: Simulation in Industry. Proceedings of the 16th European Simulation Symposium (ESS 2004) Budapest (Page: 4)
Simulation supported agent-based adaptive production scheduling
Authors: Csáji, Balázs Csanád; Kádár, Botond; Monostori, László; Pfeiffer, András
Editor: Taisch, M
Date: 2004.
Published by: Global Challenges in Manufacturing. Proceedings of the International IMS Forum 2004. Cernobbio, Part 1. (Page: 6)
Simulation supported analysis of a dynamic rescheduling system
Authors: Pfeiffer, András; Kádár, Botond; Csáji, Balázs Csanád; Monostori, László
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 2)
Testing and validation of deterministic schedules in a simulated stochastic environment
Authors: Kádár, Botond; Pfeiffer, András; Monostori, László
Date: 2004.
Published by: Information Control Problems in Manufacturing. Proceedings of the 11th IFAC symposium INCOM 2004, Salvador (Page: 6)
Quality-oriented modelling, simulation and management of production lines
Authors: Viharos, Zsolt János; Monostori, László
Editor: Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 4)
Learning and cooperation in a distributed market-based production control system
Authors: Csáji, Balázs Csanád; Monostori, László; Kádár, Botond
Editor: Ueda, L; Monostori, L; Márkus, A
Date: 2004.
Published by: Emergent Synthesis. Proceedings of the 5th international workshop IWES'04, Budapest (Page: 1)
Agent-based product life cycle data support
Authors: Niemann, J.; Ilie-Zudor, E.; Monostori, László; Westkamper, E.
Date: 2004.
Published by: Manufacturing, Modelling, Management and Control. Proceedings of the IFAC-MIM'04 Conference Athens (Page: 1)
Discrete event simulation for supporting production planning and scheduling decisions in digital factories
Authors: Kádár, Botond; Pfeiffer, András; Monostori, László
Editor: Monostori, L
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 4)
Engineering intelligent systems, introduction
Authors: Monostori, László
Date: 2004.
Published by: APPLIED INTELLIGENCE (Page: 1)
Adaptation and learning in distributed production control
Authors: Monostori, László; Csáji, Balázs Csanád; Kádár, Botond
Date: 2004.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 3)

2003.

Real-life scheduling using constraint programming and simulation
Authors: Kovács, A.; Váncza, József; Kádár, Botond; Monostori, László; Pfeifer, A.
Editor: Monostori, L; Kádár, B; Morel, G
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 2)
Monitoring of complex production systems, in view of digital factories
Authors: Viharos, Zsolt János; Monostori, László; Novák, K.; Tóth, Gábor András; Koródi, T.; Csongrádi, Z.; Kenderesy, T.; Solymosi, T.; Lorincz, A.; Magai, I.; Fazekas, F.
Editor: Ilic, D; Borsic, M; Butorac, J
Date: 2003.
Published by: Metrology in the 3rd millennium. Proceedings of the XVII. IMEKO world congress. Dubrovnik, 2003 (Page: 1)
Realizing the digital factory: monitoring of complex production systems
Authors: Viharos, Zsolt János; Monostori, László; Csongrádi, Z.
Editor: Monostori, L; Kádár, B; Morel, G
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 2)
Realizing the digital factory: monitoring of complex production systems
Authors: Viharos, Zsolt János; Monostori, László; Csongrádi, Z.
Editor: Monostori, L; Kádár, B; Morel, G
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 3)
An important aspect of a digital factory: monitoring of complex production systems
Authors: Viharos, Zsolt János; Monostori, László; Csongrádi, Z.
Editor: Tóth, T; Bikfalvi, P; Göndri Nagy, J
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration. WESIC 2003. Miskolc, Vol. 2. (Page: 3)
Towards the realisation of digital enterprises
Authors: Monostori, László; Váncza, József; Márkus, A.; Kádár, Botond; Viharos, Zsolt János
Editor: Weber, C; Bley, H; Hirt, G
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 9)
Intelligent manufacturing systems, digital enterprises, production networks: challenges for the scientific & industrial collaboration
Authors: Monostori, László
Editor: Tóth, T; Bikfalvi, P; Göndri Nagy, J
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 2)
Improving multi-agent based scheduling by neurodynamic programming
Authors: Csáji, Balázs Csanád; Kádár, Botond; Monostori, László
Date: 2003.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Page: 1)
Constraint programming based support for production networks management
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László; Kuzmina, E.
Editor: Monostori, L; Kádár, B; Morel, G
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 1)
Adaptive approaches to increasing the performance of production control systems
Authors: Kádár, Botond; Monostori, László; Csáji, Balázs Csanád
Editor: Weber, C; Bley, H; Hirt, G
Date: 2003.
Published by: Progress in Virtual Manufacturing Systems. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, 2003 (Page: 3)
Constraint programming based support for production networks management
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László; Kuzmina, E.
Editor: Monostori, L; Kádár, B; Morel, G
Date: 2003.
Published by: Intelligent manufacturing systems 2003 (IFAC Proceedings Volumes, 0474-6674) (Page: 1)
Digital enterprises: first results of a national R&D project
Authors: Monostori, László; Váncza, József; Márkus, A.; Kádár, Botond; Viharos, Zsolt János
Date: 2003.
Published by: Intelligent Robots and Systems, IROS 2003. Proceedings IEEE/RSJ International Conference. Vol. 3 (Page: 2)
Evaluating and improving production control systems by using emulation
Authors: Pheiffer, A.; Kádár, Botond; Monostori, László
Editor: Hamza, MH
Date: 2003.
Published by: Applied Simulation and Modelling. Proceedings of the twelfth IASTED international conference, Marbella, 2003 (Page: 2)
AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing
Authors: Monostori, László
Date: 2003.
Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Page: 2)

2002.

Training and application of artificial neural networks with incomplete data
Authors: Viharos, Zsolt János; Monostori, László; Vincze, T.
Editor: Hendtlass, T; Ali, M
Date: 2002.
Published by: Developments in Applied Artificial Intelligence. 15th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems. IEA/AIE 2002. Cairns, 2002. (Lecture notes in computer science 2358) (Page: 6)
Teaching manufacturing systems modelling through simulation in an international platform for education and research
Authors: Ilie-Zudor, E.; Monostori, László; Macchi, M.; Kádár, Botond; Kuzmina, E.
Editor: Mosca, R; Tonelli, F; Pozzi Cotto, S
Date: 2002.
Published by: Proceedings of the 4th International Conference on the Modern Information Technology in the Innovation Processes of the Industrial Enterprises. MITIP 2002. Savona (Page: 4)
Shop-floor scheduling based on reinforcement learning algorithm
Authors: Stefán, P.; Monostori, László
Editor: Teti, R
Date: 2002.
Published by: Intelligent computation in manufacturing engineering. 3rd CIRP international seminar on intelligent computation in manufacturing engineering. ICME 2002. Ischia (Page: 7)
Virtual institute for modelling of industrial manufacturing systems: an international platform for teaching and research
Authors: Ilie-Zudor, E.; Kádár, Botond; Monostori, László; Cavalieri, S.; Wiendahl, HP; Cieminski, G.; Di Mascolo, M.; Campi, A.; Santambrogio, N.
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 7)
Virtual institute for the modelling of industrial manufacturing systems: integration of on-line and "face to face" learning in an international platform for teaching and research
Authors: Cavalieri, S.; Garetti, M.; Macchi, M.; Campi, A.; Collina, F.; Colorni, A.; Locatelli, I.; Longeri, T.; Cieminski, G.; Lopitzsch, J.; Di Mascolo, M.; Frein, Y.; Kádár, Botond; Monostori, László; Ilie-Zudor, E.; Meroni, A.; Santambrogio, N.
Editor: Passey, D; Kendall, M
Date: 2002.
Published by: TelE-LEARNING: The Challenge for the Third Millennium. IFIP 17th World Computer Congress - TC3 Stream on TelE-Learning. Montréal (IFIP Conference Proceedings 230) (Page: 1)
The role of adaptive agents in distributed manufacturing
Authors: Monostori, László; Kádár, Botond; Csáji, Balázs Csanád
Editor: Ueda, K
Date: 2002.
Published by: Proceedings of the 4th international workshop on emergent synthesis. IWES'02. Kobe (Page: 1)
An international platform for education and research in the area of modelling of industrial manufacturing systems
Authors: Ilie-Zudor, E.; Monostori, László; Wiendahl, HP; Macchi, M.; Longeri, T.; Di Mascolo, M.
Editor: Katilinic, B
Date: 2002.
Published by: Annals of DAAAM for 2002 and Proceedings of the 13th International DAAAM Symposium. Intelligent Manufacturing and Automation: Learning from Nature. Vienna (Page: 2)
An agent-based approach for production control incorporating environmental and life-cycle issues, together with sensitivity analysis
Authors: Ilie-Zudor, E.; Monostori, László
Editor: Hendtlass, T; Ali, M
Date: 2002.
Published by: Developments in Applied Artificial Intelligence. 15th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems. IEA/AIE 2002. Cairns, 2002. (Lecture notes in computer science 2358) (Page: 1)
SZTAKI in PLANET: an introduction
Authors: Monostori, László; Váncza, József
Date: 2002.
Published by: PLANET NEWS (Page: 9)
Optimisation of production systems by using simulation and artificial intelligence techniques
Authors: Viharos, Zsolt János; Monostori, László
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 5)
Digital factories, production networks
Authors: Monostori, László; Haidegger, Géza; Váncza, József; Viharos, Zsolt János
Date: 2002.
Published by: ERCIM NEWS (Page: 5)
Digital enterprises: A national R&D project in Hungary
Authors: Monostori, László; Haidegger, Géza; Váncza, József; Viharos, Zsolt János
Editor: Maropoulos, PG
Date: 2002.
Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 2)
Digital enterprises, production networks
Authors: Monostori, László
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest, Vol. 2. (Page: 5)
Environmental and life cycle issues in holonic manufacturing
Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2002.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS (Page: 2)
Integration of on-line and face-to-face learning at an international platform for teaching and research
Authors: Ilie-Zudor, E.; Monostori, László; Kádár, Botond; Cavalieri, S.; Cieminski, G.; Di Mascolo, M.; Campi, A.
Date: 2002.
Published by: The 18th international conference on advanced science and technology. High technologies to start a new millennium. ICAST 2002. Proceedings. Chicago (Page: 1)
Monitoring parameter based determination of production tolerances
Authors: Viharos, Zsolt János; Monostori, László; Novák, K.; Tóth, Gábor András; Kenderesy, T.; Csongrádi, Z.; Koródi, T.
Editor: Penninger, A; Ziaja, GY; Vörös, G
Date: 2002.
Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 5)
Intelligent techniques for quality control and management
Authors: Monostori, László
Date: 2002.
Published by: TOTAL QUALITY MANAGEMENT (Page: 1)
AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing
Authors: Monostori, László
Editor: Camacho, EF; Basanez, L; de la Puente, JA
Date: 2002.
Published by: 15th Triennial World Congress of the International Federation of Automatic Control. Plenary papers, survey papers and milestones. Barcelona, 2002. (Page: 1)

2001.

On the relationship between learning capability and the Boltzmann-formula
Authors: Stefán, P.; Monostori, László
Editor: Monostori, L; Váncza, J; Ali, M
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001.( Lecture notes in artificial intelligence 2070.) (Page: 2)
On Internet routing problems in dynamically changing environment
Authors: Stefán, P.; Monostori, László
Editor: Lehoczky, L; Kalmár, L
Date: 2001.
Published by: MicroCAD 2001. International scientific conference. Miskolc, 2001. Section J: "Gábor Dénes" Applied information engineering. (Page: 2)
Modelling and management of production networks
Authors: Ilie-Zudor, E.; Monostori, László
Editor: Kovács, GL; Bertók, P; Hajdegger, G
Date: 2001.
Published by: Digital enterprise challenges. Life-cycle approach to management and production. (Page: 6)
Optimisation of process chains and production plants by using a hybrid, AI- and simulation based approach
Authors: Viharos, Zsolt János; Monostori, László
Editor: Monostori, L; Váncza, J; Ali, M
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence 2070.) (Page: 8)
Quasi-optimal solutions of the travelling salesman's problem in variable environment
Authors: Stefán, P.; Monostori, László; Vaskó, Z.
Editor: Lehoczky, L; Kalmár, L
Date: 2001.
Published by: 3rd international conference of Ph.D. students. Vol. I. Engineering sciences. Miskolc, 2001. (Page: 4)
Számítástechnika, informatika a gépgyártás-technológiában. (Informatics in manufacturing technology.)
Authors: Erdélyi, F.; Horváth, Miklós; Kulcsár, Balázs; Monostori, László; Renner, Gábor; Tóth, T.
Editor: Prohászka, J
Date: 2001.
Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 1)
Reinforcement learning for solving shortest-path and dynamic scheduling problems
Authors: Stefán, P.; Monostori, László; Erdélyi, F.
Editor: Butala, P; Ueda, K
Date: 2001.
Published by: Proceedings of the 3rd international workshop on emergent synthesis. IWES'01 Bled, 2001. (Page: 8)
Intelligent techniques for quality control and management
Authors: Monostori, László
Editor: Majstorovic, VD
Date: 2001.
Published by: International working conference on total quality management - Advanced and intelligent approaches. Proceedings. Subotica, 2001. (Page: 2)
Intelligent techniques for managing complexity, changes and uncertainties in manufacturing
Authors: Monostori, László
Date: 2001.
Published by: 10th IFAC symposium on information control problems in manufacturing. INCOM 2001. Vienna, 2001.
Approaches to increase the performance of agent-based production systems
Authors: Kádár, Botond; Monostori, László
Editor: Monostori, L; Váncza, J; Ali, M
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. ( Lecture notes in artificial intelligence 2070.) (Page: 6)
Agent-based support for handling environmental and life-cycle issues
Authors: Ilie-Zudor, E.; Monostori, László
Editor: Monostori, L; Váncza, J; Ali, M
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence 2070.) (Page: 8)
Distributed control of manufacturing systems through adaptive agents
Authors: Kádár, Botond; Monostori, László
Editor: Stoica, A; Stanescu, AM; Scarlat, C
Date: 2001.
Published by: Dynamic control and management system in manufacturing processes for the optimization of throughput and energy usage. DYCOMANS. Phase 2. Workshop 2. Integrated Control of Manufacturing. The Workshop preprint. Bucharest, 2001. (Page: 9)
Emergent synthesis methodologies for manufacturing
Authors: Ueda, K.; Márkus, A.; Monostori, László; Kals, HJJ; Arai, T.
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 5)
Intelligent manufacturing processes and systems
Authors: Monostori, László
Date: 2001.
Published by: Symposium on the 50th anniversary of Department of Manufacturing Engineering of Budapest University of Technology and Economics. (BUTE). Budapest, 2001. (Page: 1)
Hybrid, AI- and simulation-supported optimisation of process chains and production plants
Authors: Monostori, László; Viharos, Zsolt János
Date: 2001.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 3)
Adaptive agents in distributed manufacturing systems
Authors: Kádár, Botond; Monostori, László
Date: 2001.
Published by: 10th IFAC symposium on information control problems in manufacturing. INCOM 2001. Vienna, 2001.

2000.

New manufacturing paradigms
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2000.
Published by: Analele Universitatii din Oradea. Fasc. Mecanica. Sect. Technologii in Constructia de Masini. (Page: 3)
Multipurpose modeling and optimization of production processes and process chains by combining machine learning and search techniques
Authors: Monostori, László; Viharos, Zsolt János
Date: 2000.
Published by: CIRP JOURNAL OF MANUFACTURING SYSTEMS
Quality-oriented modelling and optimisation of production processes and process chains
Authors: Monostori, László; Viharos, Zsolt János
Editor: Durakbasa, MN; Osanna, PH; Afjehi-Sadat, A
Date: 2000.
Published by: IMEKO 2000. XVI. IMEKO world congress. Proceedings. Vienna, 2000. Vol. 8. Measurement of geometrical quantities, quality management. (Page: 4)
Reinforcement learning methods in information engineering
Authors: Stefán, P.; Monostori, László; Pupp, Z.
Date: 2000.
Published by: MicroCAD'2000. International computer science conference. Miskolc, 2000. (Page: 1)
Satisfying various requirements in different levels and stages of machining using one general ANN-based process model
Authors: Monostori, László; Viharos, Zsolt János
Date: 2000.
Published by: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (Issue no.: 1, Page: 2)
Knowledge-based hybrid techniques combined with simulation: application to robust manufacturing systems. (Computer techniques.)
Authors: Mezgár, István; Monostori, László; Kádár, Botond; Egresits, C.
Editor: Leones, CT
Date: 2000.
Published by: Knowledge-based systems. Techniques and Applications. Vol. 3. (Page: 7)
Intelligent machines
Authors: Monostori, László
Editor: Molnár, K; Ziaja, G; Vörös, G
Date: 2000.
Published by: Proceedings of second conference on mechanical engineering. Budapest, 2000. Vol 1. (Page: 2)
Combined use of simulation and AI/machine learning techniques in designing manufacturing processes and systems
Authors: Monostori, László; Kádár, Botond; Viharos, Zsolt János; Mezgár, István; Stefán, P.
Editor: Shpitalni, M
Date: 2000.
Published by: 2000 international CIRP design seminar on design with manufacturing: intelligent design concepts methods and algorithms. Conference proceedings. Haifa, 2000. (Page: 1)
AI-based modelling and optimisation of coupled production processes
Authors: Viharos, Zsolt János; Monostori, László
Date: 2000.
Published by: ERCIM NEWS (Page: 3)
Environmental and life cycle issues in agent-based manufacturing
Authors: Ilie-Zudor, Angyalka Elisabeth; Monostori, László
Date: 2000.
Published by: ERCIM NEWS (Page: 3)
Environmental and life cycle issues in holonic manufacturing
Authors: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Date: 2000.
Published by: The 33rd CIRP international seminar on manufacturing systems. Proceedings. Stockholm, 2000. (Page: 1)
Hierarchy in distributed shop floor control
Authors: Bongaerts, L.; Monostori, László; McFarlaine, D.; Kádár, Botond
Date: 2000.
Published by: COMPUTERS IN INDUSTRY (Page: 1)
AI and ML techniques combined with simulation for designing and controlling manufacturing processes and system
Authors: Monostori, László; Kádár, Botond; Viharos, Zsolt János; Mezgár, István; Stefán, P.
Editor: Groumpos, P; Tzes, A
Date: 2000.
Published by: MIM 2000. IFAC symposium on manufacturing, modeling, management and control. Preprints. Rio Patras, 2000. (Page: 1)

1999.

Simulation and optimization of production and logistic systems with the SIMPLE++ package
Authors: Kádár, Botond; Mikó, P.; Monostori, László
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 1)
Subsymbolic and hybrid artificial intelligence techniques in financial engineering
Authors: Monostori, László
Date: 1999.
Published by: ERCIM NEWS (Page: 2)
Selection of input and output variables for ANN based modeling of cutting processes
Authors: Viharos, Zsolt János; Monostori, László; Markos, S.
Editor: Jędrzejewski, J
Date: 1999.
Published by: Innovative and integrated manufacturing. X workshop on supervising and diagnostics of machining systems. Karpacz, 1999. (Scientific papers of the Institute of Mechanical Engineering and Automation of the Wroclaw University of Technology, 72. Con) (Page: 1)
Satisfying various requirements in different levels and stages of machining using one general ANN-based process model
Authors: Monostori, László; Viharos, Zsolt János; Markos, S.
Editor: Maropoulos, PG; McGeough, JA
Date: 1999.
Published by: Proceedings of the 15th international conference on computer-aided production engineering. CAPE'99. Durham, 1999. (Page: 4)
Reactive scheduling in real time production control
Authors: Szelke, E.; Monostori, László
Editor: Brandimarte, P; Vila, A
Date: 1999.
Published by: Modeling manufacturing systems. From aggregate planning to real-time control. (Page: 6)
Using symbolic and sub-symbolic methods in solving problems difficult to analyze
Authors: Stefán, P.; Monostori, László; Erdélyi, F.
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 1)
A compromise oriented optimization tool for supporting decision making in machining
Authors: Viharos, Zsolt János; Monostori, László
Date: 1999.
Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Leuven, 1999. (Page: 1)
An intelligent AE sensor for the monitoring of finish machining process
Authors: Dolinsek, S.; Kopac, J.; Viharos, Zsolt János; Monostori, László
Editor: Meech, JA
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 2. (Page: 8)
A general, ANN-based cutting model and its application in different phases of manufacturing
Authors: Viharos, Zsolt János; Monostori, László
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 1)
A framework for modelling, monitoring and optimisation of manufacturing processes and process chains by using machine learning and search algorithms
Authors: Viharos, Zsolt János; Monostori, László; Markos, S.
Date: 1999.
Published by: Integration in technical diagnostics. 9th IMEKO TC-10 international conference on technical diagnostics. Wroclaw, 1999. (Scientific papers of the Institute of Mining of the Wroclaw University of Technology 86. Conferences, 24.) (Page: 2)
An environmentally benign approach to agent-based manufacturing
Authors: Ilie-Zudor, A.; Monostori, László
Editor: Kopacek, P
Date: 1999.
Published by: MAS'99. 1st IFAC workshop on multi-agent-systems in production. Preprints. Vienna, 1999. (Page: 1)
Multipurpose modelling and optimisation of production processes and process chains by combining machine learning and search techniques
Authors: Monostori, László; Viharos, VZS
Editor: Van Brussel, H; Kruth, JP; Lauwers, B
Date: 1999.
Published by: The 32nd CIRP international seminar on manufacturing Systems. New supporting tools for designing products and production systems. Proceedings. Leuven, 1999. (Page: 3)
Mesterséges intelligencia alkalmazások a gépipari folyamat felügyeletben. (Artificial intelligence applications in monitoring of manufacturing processes.)
Authors: Monostori, László; Egresits, CS
Editor: Horváth, M; Szalay, T
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 5)
Elosztott intelligenciájú (holonikus) gyártórendszerek. (Holonic manufacturing systems: manufacturing systems with distributed intelligence.)
Authors: Kádár, Botond; Monostori, László
Editor: Horváth, M; Szalai,
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 8)
Dobór wejśa i wyjśa sieci neuronowych modelujcych procesy skrawania. (Selection of input and output variables of ANN-based modelling of cutting processes.)
Authors: Viharos, Zsolt János; Monostori, László; Markos, S.
Date: 1999.
Published by: INZYNIERIA MASZYN (Page: 9)
Automatic input-output configuration and generation of ANN-based process models and their application in machining
Authors: Viharos, Zsolt János; Monostori, László
Editor: Imam,
Date: 1999.
Published by: Multiple approaches to intelligent systems. 12th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE-99. Proceedings. Cairo, 1999. (Lecture notes in artificial intelligence) (Page: 6)
Alapvető mesterséges intelligencia technikák. (Fundamental artificial intelligence techniques.)
Authors: Váncza, József; Monostori, László; Egresits, CS
Editor: Horváth, M; Szalay, T
Date: 1999.
Published by: A mesterséges intelligencia gyakorlati alkalmazásai. Oktatási segédlet. (Page: 1)
Evaluation and compare of novel production paradigms and their control architectures
Authors: Ilie-Zudor, A.; Monostori, László; Kádár, Botond; Liszka, L.
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 1)
Extended enterprise - Basic concepts, enabling information technologies, open questions
Authors: Liszka, L.; Kádár, Botond; Monostori, László; Ilie-Zudor, A.
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 4)
Intelligent, quality-oriented supervisory control of manufacturing processes and process chains
Authors: Viharos, Zsolt János; Monostori, László
Editor: Matko, D; Mušič., G
Date: 1999.
Published by: Techniques for supervisory management systems. DYCOMANS phase 2 workshop I. Preprints. Bled, 1999. (INCO Copernicus network, No. 977022.) (Page: 1)
Incorporation of environmental issues in production control
Authors: Ilie-Zudor, A.; Monostori, László
Editor: Katalinic, B
Date: 1999.
Published by: Annals of DAAAM for 1999 and proceedings of the 10th international DAAAM symposium "intelligent manufacturing and automation: past - present - future". Vienna, 1999. (Page: 2)
Holonic control of manufacturing systems
Authors: Monostori, László; Kádár, Botond
Editor: Kopacek, P
Date: 1999.
Published by: MAS'99. 1st IFAC workshop on multi-agent-systems in production. Preprints. Vienna, 1999. (Page: 1)
Genetic programming for feature extraction in financial forecasting
Authors: Hornyák, J.; Monostori, László
Date: 1999.
Published by: ERCIM NEWS (Page: 1)
Agent-based control of manufacturing systems
Authors: Monostori, László; Kádár, Botond
Editor: Meech,
Date: 1999.
Published by: IPMM'99. Proceedings of the second international conference on intelligent processing and manufacturing of materials. Honolulu, 1999. Vol. 1. (Page: 1)

1998.

Novel approaches to production planning and control
Authors: Monostori, László; Hornyák, J.; Kádár, Botond
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems. Lausanne, 1998 (Page: 1)
Multistrategy learning approaches to generate and tune fuzzy control structures and their application in manufacturing
Authors: Egresits, CS; Monostori, László; Hornyák, J.
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Page: 3)
Management of changes nad disturbances in manufacturing systems
Authors: Monostori, László; Szelke, E.; Kádár, Botond
Date: 1998.
Published by: ANNUAL REVIEWS IN CONTROL (Page: 8)
Quality-oriented, comprehensive modelling of machining processes
Authors: Markos, S.; Viharos, Zsolt János; Monostori, László
Editor: Osanna, PH; Prostrednik, D; Durakbasa, NM
Date: 1998.
Published by: 6th international symposium "metrology for quality control in production". 6th IMEKO symposium. Proceedings. Vienna, 1998. (Page: 6)
Sensor integration, state and situation recognition, learning in intelligent manufacturing
Authors: Monostori, László
Editor: Dudás, I
Date: 1998.
Published by: Proceedings of the fourth international symposium on measurment technology and intelligent instruments. Miskolc-Lillafüred, 1998. (Page: 1)
An object-oriented framework for developing distributed manfacturing architectures
Authors: Kádár, Botond; Monostori, László; Szelke, E.
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Page: 1)
Soft computing and hybrid AI approaches to intelligent manufacturing
Authors: Monostori, László; Hornyák, J.; Egresits, CS; Viharos, Zsolt János
Editor: Del Pobil, AP; Mira, J; Ali, M
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applications of artificial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol. 2. (Lecture) (Page: 7)
Management of changes and disturbances in production systems
Authors: Monostori, László; Kádár, Botond; Hornyák, J.
Editor: Koussoulas, NT; Groumpos, PP
Date: 1998.
Published by: LSS '98 Large scale systems: theory and applications. 8th IFAC/IFORS/IMACS/IFIP symposium. Preprints. Rio Patras, 1998. Vol. 1. (Page: 3)
Intelligens gyártórendszerek: a kutatás és a nemzetközi együttmőködés új paradigmája. (Intelligent manufacturing systems: new paradigm in research and international co-operation.)
Authors: Monostori, László
Date: 1998.
Published by: GYÁRTÁSTECHNOLÓGIA (Page: 1)
Artificial intelligence and machine learning techniques for control and monitoring of manufacturing processes
Authors: Monostori, László
Editor: Chandra, T
Date: 1998.
Published by: IPMM'97. Australiasia-pacific forum on intelligent processing and manfacturing of materials. Gold Coast, 1997. Vol. 1. (Page: 1)
Approaches to managing changes and uncertainties in manufacturing
Authors: Monostori, László; Kádár, Botond; Hornyák, J.
Date: 1998.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 3)
Agent-based control of novel and traditional production systems
Authors: Kádár, Botond; Monostori, László
Editor: Teti, R
Date: 1998.
Published by: ICME 98. CIRP international seminar on intelligent computation in manufacturing engineering. Proceedings. Capri, 1998. (Page: 3)
Editorial to the special issue of the Journal of Intelligent Manufacturing on agent-based manufacturing
Authors: Monostori, László
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Page: 9)
Editorial to the special issue on soft computing approaches to manufacturing
Authors: Monostori, László
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Page: 2)
Hierarchy in distributed shop floor control
Authors: Bongaerts, L.; Monostori, László; McFarlane, D.; Kádár, Botond
Date: 1998.
Published by: IMS-EUROPE 1998. Proceedings of the first international workshop on intelligent manufacturing systems, Lausanne, 1998. (Page: 9)
Genetic algorithms for predictive and reactive scheduling in manufacturing systems
Authors: Hornyák, J.; Monostori, László
Editor: Teti, R
Date: 1998.
Published by: ICME 98. CIRP international seminar on intelligent computation in manufacturing engineering. Proceedings. Capri, 1998. (Page: 2)
Agent based architectures for mastering changes and disturbances in manufacturing
Authors: Monostori, László; Kádár, Botond
Editor: Del Pobil, AP; Mira, J; Ali, M
Date: 1998.
Published by: Tasks and methods in applied artificial intelligence. 11th international conference on industrial and engineering applictions of artficial intelligence and expert systems. IEA-98-AIE. Proceedings. Benicassim, Castellon, 1998. Vol.2. (Lecture not) (Page: 7)

1997.

Shop floor control architectures for the extended enterprise
Authors: Janusz, B.; Bongaerts, L.; Gullander, P.; Klingstam, P.; Monostori, László; Jordan, P.
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1)
Optimization of process chains by artificial neuronal networks and genetic algorithms using quality control charts
Authors: Viharos, Zsolt János; Monostori, László
Editor: Katalinic, B
Date: 1997.
Published by: Proceedings of the 8th international DAAAM symposium. Intelligent manufacturing and automation. Dubrovnik, 1997. (Page: 3)
On the application of multistrategy learning and hybrid AI approaches in intelligent manufacturing
Authors: Monostori, László
Editor: Kim, J
Date: 1997.
Published by: 4th IFAC workshop on intelligent manufacturing systems. IMS '97. Preprints. Seoul, 1997. (Page: 2)
Simulation and novel control techniques for re-engineering purposes
Authors: Gödri, I.; Monostori, László
Editor: Kopacek, P
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 4)
A feature extraction technique for ANN-based financial forecasting
Authors: Hornyák, J.; Monostori, László
Date: 1997.
Published by: NEURAL NETWORK WORLD (Issue no.: 4, Page: 5)
A termelés-informatika fejlődési tendenciái
Authors: Monostori, László; Kádár, Botond; Erdélyi, F.
Editor: Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 5)
A simulation framework for development and evaluation of agent based manufacturing architectures
Authors: Kádár, Botond; Monostori, László
Editor: Simek, K
Date: 1997.
Published by: DYCOMANS workshop IV. Control and management in computer integrated systems. Preprints. Zakopane, 1997. (Page: 5)
An object oriented framework for developing distributed manufacturing architectures
Authors: Kádár, Botond; Monostori, László; Szelke, E.
Editor: Monostori, L
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 5)
On hybrid learning and its application in intelligent manufacturing
Authors: Monostori, László; Egresits, CS
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Page: 1)
Multistrategy learning approaches to generate and tune fuzzy control structures and their applications in manufacturing
Authors: Egresits, CS; Monostori, László; Hornyák, J.
Editor: Monostori, L
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 8)
Distributed manufacturing, extended enterprises
Authors: Monostori, László; Kádár, Botond
Date: 1997.
Published by: ERCIM NEWS (Page: 3)
Design and real-time reconfiguration of robust manufacturing systems by using design of experiments and artificial neural networks
Authors: Mezgár, István; Egresits, CS; Monostori, László
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Page: 6)
Approaches to coupling connectionist and expert systems in intelligent manufacturing
Authors: Barschdorff, D.; Monostori, László; Wöstenkühler, GW; Egresits, CS; Kádár, Botond
Date: 1997.
Published by: COMPUTERS IN INDUSTRY (Page: 5)
Felügyeleti és diagnosztikai rendszerek
Authors: Monostori, László; Egresits, CS
Editor: Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 3)
Genetic algorithms for automatic design of fuzzy decision systems for intelligent manufacturing
Authors: Egresits, CS; Monostori, László
Editor: Foulloy, L
Date: 1997.
Published by: 3rd IFAC symposium on intelligent components and instruments for control applications. SICICA '97. Preprints. Annecy, 1997. (Page: 6)
Mesterséges intelligencia módszerek
Authors: Váncza, József; Monostori, László; Egresits, CS
Editor: Erdélyi, F
Date: 1997.
Published by: A technológia menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 1)
Management of changes and disturbances in manufacturing systems
Authors: Monostori, László; Szelke, E.; Kádár, Botond
Editor: Kopacek, P
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 2)
Intelligent techniques for management of changes and disturbances in manufacturing
Authors: Monostori, László; Szelke, E.; Kádár, Botond
Editor: Venuvinod, PK; Djordjevich, A
Date: 1997.
Published by: CIRP international symposium. Advanced design and manufacture in the global manufacturing era. Hong Kong, 1997. Vol. 1. (Page: 6)
ANN and hybrid AI approaches to financial and business problems
Authors: Monostori, László; Hornyák, J.; Egresits, CS
Date: 1997.
Published by: NEURAL NETWORK WORLD (Issue no.: 4, Page: 4)

1996.

Knowledge based reactive management of manufacturing cells
Authors: Kádár, Botond; Markos, S.; Monostori, László
Editor: Browne, J; Mas, RH; Hlodversson, O
Date: 1996.
Published by: IT and manufacturing partnerships. Delivering the promise. Proceedings of the conference on integration in manufacturing. Galwai, 1996.( Advances in design and manufacturing, 7.) (Page: 1)
A coupled system for re-engineering of robust manufacturing system configurations
Authors: Mezgár, István; Egresits, CS; Monostori, László; Kovács, György
Editor: Lee, JK; Liebowitz, J; Chae, YM
Date: 1996.
Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 5)
An integrated approach to design, manufacturing and assembly/disassembly
Authors: Gödri, I.; Monostori, László
Editor: Kataliniic, B
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 1)
A market approach to holonic manufacturing
Authors: Márkus, A.; Kis, T.; Váncza, József; Monostori, László
Date: 1996.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 4)
Knowledge based monitoring and management of manufacturing cells
Authors: Kádár, Botond; Markos, S.; Monostori, László
Date: 1996.
Published by: Management and control: tools and action. DYCOMANS workshop II. Algarve, 1996. (Page: 8)
Investigation of machined surfaces using artificial intelligence methods
Authors: Szalay, T.; Alpek, F.; Monostori, László; Markos, S.; Viharos, Zsolt János
Editor: Dudás, I
Date: 1996.
Published by: Proceedings of the IXth international conference on cutting tools. IX. nemzetközi szerszámkonferencia. Miskolc, 1996. (Page: 6)
From pattern recognition techniques through artificial neural networks to hybrid AI solutions in manufacturing
Authors: Monostori, László
Editor: Stelson, K; Oba, F
Date: 1996.
Published by: Proceedings of the Japan-USA symposium on flexible automation. Boston, 1996. Vol. 2. (Page: 1)
Generation and tuning of fuzzy control structures using genetic algorithms and neural learning
Authors: Egresits, CS; Hornyák, J.; Monostori, László
Editor: Katalinic, B
Date: 1996.
Published by: Proceedings of the 7th international DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 1)
Hybrid AI solutions and their application in manufacturing
Authors: Monostori, László; Egresits, CS; Kádár, Botond
Editor: Tanaka, T; Ohsuga, S; Ali, M
Date: 1996.
Published by: Industrial and engineering applications of artificial intelligence end expert systems. IEA/AIE 96. Proceedings of the ninth international conference. Fukuoka, 1996. (Page: 4)
Fertigungsparameter schätzung zur vorgeschriebenen Oberflächenqualität mittels neuronaler Netze
Authors: Osanna, PH; Monostori, László; Alpek, F.; Viharos, Zsolt János
Editor: Katalinic, B
Date: 1996.
Published by: Proceedings of the 7th International DAAAM symposium on product and manufacturing: flexibility, integration, intelligence. Vienna, 1996. (Page: 3)

1995.

On hybrid learning and its application in intelligent manufacturing
Authors: Monostori, László; Egresits, CS
Editor: Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 6)
Neuro-fuzzy systems as hybrid AI solutions to diagnostic problems
Authors: Egresits, CS; Monostori, László
Date: 1995.
Published by: Acoustical and vibratory surveillance methods and diagnostic techniques. 2nd international conference. Senlies, 1995 (Page: 8)
NEURECA: an ANN based system for monitoring and control of industrial processes
Authors: Egresits, CS; Monostori, László
Date: 1995.
Published by: microCAD'95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 6)
Re-engineering of robust manufacturing system configurations
Authors: Mezgár, István; Egresits, CS; Monostori, László
Editor: Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 2)
Reactive and proactive scheduling with learning in reactive operation management
Authors: Szelke, E.; Monostori, László
Editor: Stroch, L
Date: 1995.
Published by: IFIP working conference on managing concurrent manufacturing to improve industrial performance. Conference proceedings. Seattle, 1995 (Page: 4)
Virtual manufacturing using a hierarchically coupled hybrid AI system
Authors: Monostori, László; Kádár, Botond; Egresits, CS
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 3)
Virtual manufacturing by coupling connectionist and expert systems
Authors: Monostori, László; Kádár, Botond; Egresits, CS
Date: 1995.
Published by: 6th international DAAAM symposium. Proceedings. Krakow, 1995. Krakow, Politechnika Krakowska, 1995 (Page: 2)
Intelligent manufacturing with reactive/proactive scheduling and learning for dynamic operation management
Authors: Szelke, E.; Monostori, László
Editor: Soucková, M; Böhm, J
Date: 1995.
Published by: Industrial control and management methods: theory and practice. DYCOMANS's workshop. Preprints. Prague, 1995 (Page: 8)
Hybrid AI approaches to control and monitoring of manufacturing processes
Authors: Monostori, László
Date: 1995.
Published by: Manufacturing systems: adaptive control and management. DYCOMANS special session at ACASP symposium. Budapest, 1995 (Page: 2)
Connectionist and neuro-fuzzy techniques in intelligent manufacturing
Authors: Monostori, László
Date: 1995.
Published by: The first world congress on intelligent manufacturing processes & systems. Proceedings. Mayagüez-San Juan, 1995. Vol. 2. (Page: 9)
Combined structure and parameter learning for control applications
Authors: Egresits, CS; Monostori, László
Editor: Rupnik, V; Bogotaj, M
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 7)
Approaches to coupling connectionist and expert systems in intelligent manufacturing
Authors: Barschdorff, D.; Monostori, László; Wörstenkühler, GW; Egresits, CS; Kádár, Botond
Editor: Monostori, L
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 5)
Coupling expert systems and artificial neural networks: a hybrid AI solution and its application in manufacturing
Authors: Monostori, László; Kádár, Botond; Egresits, CS
Date: 1995.
Published by: microCAD' 95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 6)
HYBEXP: a hierarchically coupled hybrid AI approach to production control
Authors: Kádár, Botond; Egresits, CS; Monostori, László
Editor: Rupnik, V; Bogotaj, M
Date: 1995.
Published by: 3rd symposium on operation research '95. SOR '95. Proceedings. Portoroz, 1995 (Page: 9)
Hybrid AI approaches for supervision and control of manufacturing processes
Authors: Monostori, László
Date: 1995.
Published by: AC' 95. IV International conference on monitoring and automation supervision in manufacturing. Miedzeszyn, 1995 (Page: 3)
Hybrid AI approaches for intelligent manufacturing
Authors: Monostori, László
Date: 1995.
Published by: European software days. Budapest, 1995 (Page: 1)
Application of hybrid AI techniques in manufacturing
Authors: Monostori, László; Kádár, Botond; Egresits, CS
Date: 1995.
Published by: CAMP '95. CAD/CAM and multimedia. 5th international conference and trade show. Budapest, 1995 (Page: 5)

1994.

On the application of hybrid AI techniques in manufacturing
Authors: Monostori, László; Egresits, C.; Zsoldos, L.
Date: 1994.
Published by: microCAD'94. International computer science conference. Miskolc, 1994 (Page: 1)
Some results in neuro-fuzzy monitoring of manufacturing processes
Authors: Monostori, László
Date: 1994.
Published by: 5th international DAAAM symposium. Maribor, 1994 (Page: 2)
NEURECA: an object oriented system under Windows for ANN based monitoring and control of industrial processes
Authors: Egresits, C.; Monostori, László
Date: 1994.
Published by: 5th international DAAAM symposium. Maribor, 1994 (Page: 1)
Monitoring of manufacturing processes by ANN and neuro-fuzzy techniques
Authors: Monostori, László
Date: 1994.
Published by: Proceedings of the XIII. IMEKO world congress: from measurement to innovation. Torino, 1994. Vol. 3. (Page: 2)
Modelling and monitoring of milling through neuro-fuzzy techniques
Authors: Monostori, László; Egresits, C.
Date: 1994.
Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 3)
Combining neural and fuzzy techniques in monitoring and control of manufacturing processes
Authors: Monostori, László
Editor: Bányász, CS
Date: 1994.
Published by: SICICA'94. Intelligent components and instruments for control applications. Preprints. Budapest, 1994 (Page: 1)

1993.

Wear estimation and state classification of cutting tools in turning via artificial neural networks
Authors: Barschdorff, D.; Monostori, László; Kottenstede, T.; Warnecke, G.; Müller, M.
Date: 1993.
Published by: International conference on fault diagnosis (TOOLDIAG'93) Toulouse 1993. Proceedings (Page: 6)
A step towards intelligent manufacturing: modelling and monitoring of manufacturing processes through artificial neural networks
Authors: Monostori, László
Date: 1993.
Published by: CIRP ANNALS-MANUFACTURING TECHNOLOGY (Page: 4)
Neuro-fuzzy modelling and monitoring of manufacturing processes
Authors: Monostori, László
Date: 1993.
Published by: Proceedings of the 4th international DAAAM symposium. Brno, 1993 (Page: 1)
Monitoring of the milling process through neural network and fuzzy techniques
Authors: Markos, S.; Monostori, László; Nacsa, János; Szöllősi, G.
Editor: Mezgár, I; Bertók, P
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 2)
Intelligent manufacturing through neural networks
Authors: Monostori, László
Editor: Groen, FCA; Hirose, S; Thorpe, CE
Date: 1993.
Published by: Intelligent autonomous systems (IAS-3) Proceedings of the international conference Pittsburgh, 1993 (Page: 3)
Cutting tool monitoring in turning under varying cutting conditions; an artificial neural network approach
Authors: Barschdorff, D.; Monostori, László; Kottenstede, T.; Warnecke, G.; Müller, M.
Editor: Chung, PWG; Lovegrove, G; Ali, M
Date: 1993.
Published by: Industrial and engineering applications of artificial intelligence and expert systems (IEA/AIE 93) Proceedings of the sixth international conference, Edinburgh, 1993 (Page: 3)

1992.

Neural networks for modelling and monitoring of manufacturing processes; milling
Authors: Monostori, László; Markos, S.; Krämer, S.; Nacsa, János; Szöllősi, G.
Date: 1992.
Published by: Proceedings of the 8th IMEKO Symposium on Technical Diagnostics Dresden, 1992 (Page: 5)
Symbolicism and connectionism: rivals or allies in intelligent manufacturing?
Authors: Barschdorff, D.; Monostori, László
Date: 1992.
Published by: MANUFACTURING SYSTEMS (Page: 1)
The role of artificial neural networks in intelligent manufacturing
Authors: Monostori, László
Editor: Katalinic, B
Date: 1992.
Published by: Flexible und Intelligente Automation, 3. Internationales Symposium von DAAAM. Budapest, 1992 (Page: 1)
Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik
Authors: Barschdorff, D.; Monostori, László; Kottenstede, T.; Warnecke, G.; Müller, M.
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 3. Klassifikation des VerschleiSSzustandes und Approximation der Verschleissmarkenbreite. Interner Bericht 5/92. Elektrische Messtechnik
Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik
Authors: Kottenstede, T.; Monostori, László; Müller, M.; Rosenberger, U.
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 2. Protokoll der multisensorielle MeSSaufnahme. Interner Bericht 3/92. Elektrische MeSStechnik
Convergence behaviour of connectionist models in large scale diagnostic problems
Authors: Monostori, László; Bothe, A.
Editor: Belli, F; Rademacher, FJ
Date: 1992.
Published by: Industrial engineering applications of artificial intelligence and expert systems. Proceedings of the 5th international conference, IEA/AIE-92. Paderborn, 1992(Lecture notes in artificial intelligence 604) (Page: 1)
Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)
Authors: Barschdorff, D.; Monostori, László; Aron, R.; Bothe, A.; Kottenstede, T.; Wöstenkühler, W.
Date: 1992.
Published by: Künstliche neuronale Netze zur Modellierung und Überwachung von Drehprozessen. Teilbericht 1. Zusammenhang zwischen der Schnittgeschwindigkeit und dem generierten Körperschall (Interner Bericht 1/92. Elektrische MeSStechnik.)
Artificial neural networks in intelligent manufacturing
Authors: Monostori, László; Barschdorff, D.
Date: 1992.
Published by: ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (Page: 4)

New search