SZTAKI: Personal information

Magyar
SZTAKIWeb English Search Phonebook Kovács György
György Kovács, Prof, head of laboratory Address: 1111 Budapest, Kende u. 13-17. Room number: K 424 Phone: +36 1 2796140 Fax: +36 1 4667503 E-mail: gyorgy.kovacsEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.hu Department: Computer Integrated Manufacturing Laboratory Graduated at the Technical University of Budapest, Faculty of Electrical Engineering, 1966. Dr. Techn. degree (Ph.D.) at the same university in 1976, Habil. and Prof. at the same university in 1995. Dr. of the Academy of Sciences degree (Design Problems of Manufacturing Systems) in 1997 at the Hungarian Academy of Sciences. Research fellow in the Computer and Automation Institute of the Hungarian Academy of Sciences since 1966. Recently head of CIM Research Laboratory since 1990. Professor at the Technical University of Budapest and at the University of Pecs. Visiting researcher in the USA (one year), Soviet Union (two years), West Germany (one year) and visiting professor in Mexico (six months) and in Italy (6+1 months). More than 300 scientific publications in journals and conference proceedings, including IFIP and IFAC world congresses. More than 100 independent citations in valued journals. Deputy chairman of the Eastern European MAP/TOP Interest Group, member of several Hungarian and international scientific organizations, as IEEE (senior member), IFAC and IFIP. Hungarian IFIP TC5 representative and deputy chairman of TC5. Member of the editorial board of 4 scientific journals. Often organizer and invited plenary speaker and round table moderator at international conferences, as for example MIM’2001 in Prague, PROLAMAT 2001 and CSIT 2004 in Budapest. Scientific interest: CIM, robotics, computer aided design and manufacturing, expert and hybrid systems, virtual manufacturing, industrial networks, technology transfer. Project manager of several Hungarian and international R&D projects, including European joint projects and bilateral research projects. Publications [order by time] [order by categories ] [order by authors] Accacia, G.M. Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Alzaga, A Knowledge management support for machine tool designers using expert enablers Authors: Nacsa, J; Bueno, R; Alzaga, A; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 18, Issue no.: 7, Page: 561-571) Anufriev, A. Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) Anufriev, A Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Armijo, A. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Athans, M Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) Authors: Athans, M; Bokor, J; Kovács, G; Szabó, Z Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) (Page: 49) Biró, Zsolt National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs. Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Bokor, J Vision system for avoidance of lane-departure. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 2000. Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292) Vision system for avoidance of Lane-depature. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 1999. Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62) Vehicle control system for avoidance of lane-departure. Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey, Date: 1999. Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom) System for detection and prevention of unintended lane-departure of vehicles. Authors: Giaone, L; Kovács, G; Bokor, J; Széll, P; Frank, P Date: 1999. Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. Vol. Q. Transportation systems, computer control. (Page: 169-174) Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) Authors: Táncos, A; Kovács, G; Bokor, J Date: 1998. Published by: Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) (Page: 37) Lane-departure detection andcontrol system for commercial vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50) Vision system for lane-departure prevention of vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288) Automatic detection of the lane departure of vehicles. Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101) Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) Authors: Athans, M; Bokor, J; Kovács, G; Szabó, Z Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) (Page: 49) Bonfatti, F Co-operative bidding of SMEs in health care sector. Authors: Mezgár, I; Kovács, GL; Bonfatti, F Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Health data in the information society. Proceedings of MIE2002. Budapest. 2002. (Studies in health technnology and informatics 90.) (Page: 838-842) Boril, ZS Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Bueno, R Knowledge management support for machine tool designers using expert enablers Authors: Nacsa, J; Bueno, R; Alzaga, A; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 18, Issue no.: 7, Page: 561-571) Burt, DM Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Bámer, B Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei Authors: Kovács, GL; Bámer, B; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54) Recycling technology implementation by the integration of SME operations Authors: Haidegger, G; Kovács, GL; Bámer, B Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615) Bölecz, M Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Campos, AR Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Cardino, G Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Cornwell, RE Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Czúni, L An intelligent solution for motion picture restoration Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 177-186) A complete solution for motion picture restoration: scanning, processing, recording Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages) A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Desrochers, AA Concurrent product/production system design and Petri Nets in automated manufacturing systems Authors: Kovács, G; Mezgár, I; Silva, M; Di Cesare, F; Desrochers, AA Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Tutorial notes (Page: 1-200) Di Cesare, F Concurrent product/production system design and Petri Nets in automated manufacturing systems Authors: Kovács, G; Mezgár, I; Silva, M; Di Cesare, F; Desrochers, AA Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Tutorial notes (Page: 1-200) Dreher, CL Cross-National comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, CL; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Advances in global high-technology management. International management of high technology. Vol. 4. Part B (Page: 91-109) Dreher, G Cross-national comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, G; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: JOURNAL OF HIGH TECHNOLOGY MANAGEMENT RESEARCH (Volume no.: 4, Issue no.: 2, Page: 139-155) Drozdik, S Using open source software in the public administration Authors: Kovács, GL; Drozdik, S; Succi, G; Zuliani, P Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: WMSCI 2005. The 9th world multi-conference on systemics, cybernetics and informatics. Vol. 9. Orlando, 2005. (Page: 75-80) Some interactive multimedia applications in production engineering Authors: Kovács, GL; Haidegger, G; Drozdik, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167) Risk assessment of an open source migration project in the public administration Authors: Kovács, GL; Drozdik, S; Kochis, PZ Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: CSITâ2005. Proceedings of the workshop on computer science and information technologies. Ufa, 2005. Vol. 1. (Page: 1-4) Risk assessment of an open source migration project Authors: Drozdik, S; Kovács, GL; Kochis, PZ Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: OSS 2005. Proceedings of the 1st international conference on open source systems. Genova, 2005. (Page: 246-249) Drozdik, SZ Open source software for the public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computer Science and Information Technologies. Proceedings of the 6th International Workshop CSIT'2004 Budapest, Vol. 1 (Page: 1-8) Open source software and open data standards in public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computational Cybernetics. Proceedings of the ICCC 2004, Second IEEE International Conference Vienna (Page: 421-428) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Drozdik, Szilveszter A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Drozdik, Szilveszter Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Egresits, CS A coupled system for re-engineering of robust manufacturing system configurations. Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL Date: 1996. Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64) Erdélyi, F Automatizálás a gépgyártás-technológiában. Authors: Erdélyi, F; Kovács, GL; Somló, J Department: Computer Integrated Manufacturing Laboratory Date: 2001. Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 187-211) Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Ettlie, JE Cross-National comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, CL; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Advances in global high-technology management. International management of high technology. Vol. 4. Part B (Page: 91-109) Cross-national comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, G; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: JOURNAL OF HIGH TECHNOLOGY MANAGEMENT RESEARCH (Volume no.: 4, Issue no.: 2, Page: 139-155) Frank, P System for detection and prevention of unintended lane-departure of vehicles. Authors: Giaone, L; Kovács, G; Bokor, J; Széll, P; Frank, P Date: 1999. Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. Vol. Q. Transportation systems, computer control. (Page: 169-174) Gavalcova, D Interfacing G2 expert system shell with MMS protocol Authors: Kovács, GL; Nagy, G; Gavalcova, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Gensym Users Society worldwide meeting. Washington, 1994 (Page: 1-13) Gavalcová, D Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Some experiments with a knowledge based simulator-scheduler. Authors: Kovács, GL; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings of the Japan-USA symposium on flexible automation. Boston, 1996. Vol. 2. (Page: 1337-1344) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) Possibilities of quality asssurance in a virtual manufacturing environment Authors: Mezgár, I; Gavalcová, D; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 61-66) A knowledge based and a hybrid system to evaluate flexible manufacturing systems Authors: Kovács, GL; Nacsa, J; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 IEEE international conference on robotics and automation. Proceedings. San Diego, 1994. Vol. 4. (Page: 3570-3575) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) Gianone, L Vision system for avoidance of lane-departure. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 2000. Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292) Vision system for avoidance of Lane-depature. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 1999. Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62) Vehicle control system for avoidance of lane-departure. Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey, Date: 1999. Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom) Lane-departure detection andcontrol system for commercial vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50) Vision system for lane-departure prevention of vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288) Automatic detection of the lane departure of vehicles. Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101) Giaone, L System for detection and prevention of unintended lane-departure of vehicles. Authors: Giaone, L; Kovács, G; Bokor, J; Széll, P; Frank, P Date: 1999. Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. Vol. Q. Transportation systems, computer control. (Page: 169-174) Girnt, M One-of-a-kind production - a concurrent engineering approach Authors: Kovács, G; Mezgár, I; Szelke, E; Girnt, M Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: One-of-a-kind production. New approaches. Proceedings of the IFIP WG 5.7 working conference. Bremen, 1991 (Page: 143-156) Gramma, C. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Grosse-Hovest, G. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Groumpos, M Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) Groumpos, P Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) Groumpos, PP Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Knowledge representation and processing in a two-level supervisory industrial environment. Authors: Groumpos, PP; Troupis, DG; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 116-121) Some modeling, simulation and control problems of advanced manufacturing systems. Authors: Groumpos, PP; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Commemoration workshop. Greek-Hungarian science and technology cooperation. Athens, 1997. (Page: 1-4) Gulyás, B Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Gál, B Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Gál, V Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Gáspár, P Automatic detection of the lane departure of vehicles. Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101) Haidegger, G Some interactive multimedia applications in production engineering Authors: Kovács, GL; Haidegger, G; Drozdik, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167) Interactive multimedia for supporting the quality of the production Authors: Kovács, GL; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45) Business growth through European partnerships conference for SME-s. Budapest, 2005. Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: (Length: 141 page) Multimedia technologies provide test scenarios in a national research project Authors: Kovács, G; Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei Authors: Kovács, GL; Bámer, B; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54) Recycling technology implementation by the integration of SME operations Authors: Haidegger, G; Kovács, GL; Bámer, B Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615) Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Intelligent, open architecture controller using knowledge server. Authors: Nacsa, J; Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33) Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Some problems of intelligent control of open CNCs and manufacturing cells. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28) Interactive multimedia as an affordable tool in factory environment. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: ASI'2000. The annual conference of ICIMS-NOE. Workshop on integration in manufacturing and beyond. IIMB'2000. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Bordeaux, 2000. (Page: 6-7) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Minőségmenedzsment és informatika. (Page: 84-137) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8) Multimedia applications in a virtual enterprise of SME-s. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) A multimedia design network for manufacturing systems' management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339) Multimedia design network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Multimedia requirements for management and control of manufacturing systems. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 117-122) Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Intelligent control of manufacturing systems using open communications. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180) Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: GEPGYARTASTECHNOLOGIA (Volume no.: 35, Issue no.: 3-4, Page: 117-120) Open systems in manufacturing Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 252-259) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166) MAP Training Center as a test-bed for OSI products in manufacturing Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371) First experiences with a MAP-networked CIM pilot plant Authors: Kovács, G; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125) Haidegger, Géza Application of TYPUS metrics and KILT modell, recycling and resource-efficient REMAKE solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 197-208.) Interactive multimedia and tele-presence in production. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Journal of Physics: Conference Series (Volume no.: 268, Page: 012015) Some iteractive multimedia applications in manufacturing. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 09. Published by: CSIT 2010. Proceedings of the 12th international workshop on computer science and information technologies. Vol. 1. Moscow - St. Petersburg, 2010. (Page: 1-9.) Some interactive multimedia applications in manufacturing Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Abstract book of MURPHYS?2010 Conference (Page: 30) Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s. Authors: Kovács, György; Haidegger, Géza; Stokic, D. Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.) ManuFuture-Hu: a jövőbeli gyártástechnológia magyar víziója, értékteremtéssel a fenntartható gazdasági növekedésért. Authors: Haidegger, Géza; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 16-17.) SME networks for car recycling in Hungary: an agent-based approach. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: A road map to the development of European SME networks: towards collaborative innovation. (Page: 103-115.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Car-recycling SME network with agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: ERCIM News (Issue no.: 73, Page: 53-54.) Download article: [pdf] Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs. Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Car recycling - supported by agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: CSIT'2007. Proceedings of the 9th international workshop on computer science and iformation technologies. Krasnousolsk, Ufa, 2007. Vol. 1. (Page: 1-9.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Agent-based solutions to support car recycling Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: ICM 2006. 3rd IEEE international conference on mechatronics. Budapest, 2006. (Page: 282-287) Hangos, KM Notes on ? and 1 1 robustness tests. Authors: Kovács, GZ; Hangos, KM Date: 1998. Published by: KIBERNETIKA (Volume no.: 34, Issue no.: 5, Page: 565-578) Robust analysis of distillation column dynamics Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KM Date: 1995. Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338) The relation between u and l1 robust analysis results Authors: Kovács, GZ; Varga, EI; Hangos, KM Date: 1995. Published by: Automatizálás '95 konferencia nemzetközi részvétellel. Automation '95 with international participation. Proceedings. Budapest, 1995. Vol. 1. (Page: 241-250) Hanis, A A complete solution for motion picture restoration: scanning, processing, recording Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages) A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Hermann, GY Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Jaccucci, G Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Jones, BC Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Jörgensen, SB Robust analysis of distillation column dynamics Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KM Date: 1995. Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338) Kas, I An intelligent solution for motion picture restoration Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 177-186) A complete solution for motion picture restoration: scanning, processing, recording Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages) A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) A digital film-saver for archives Authors: Kovács, GL; Kas, I Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: ERCIM NEWS (Volume no.: 52, Page: 52-53) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Some information management and construction problems of a digital motion picture restoration system. Authors: Kovács, GL; Kas, I Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings of the 4th international workshop on computer science and information technologies. CSIT'2002. Patras Some problems of a digital motion picture restoration system. Authors: Kovács, GL; Kas, I Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 127-132) Kas, I. Eljárás és berendezés digitálisan tárolt mozgókép-információból mozifilm képkockák előállítására Authors: Palotási, A.; Kas, I.; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. 02. 08. Published by: Szabadalmi okirat (Patent Certificate) (Issue no.: No. 225 393 (P 04 02212)) Keul, ZS Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Kmecs, I Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) Simulation of FMS with application of reuse and object-oriented technology. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396) Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) Kochis, PZ Risk assessment of an open source migration project in the public administration Authors: Kovács, GL; Drozdik, S; Kochis, PZ Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: CSITâ2005. Proceedings of the workshop on computer science and information technologies. Ufa, 2005. Vol. 1. (Page: 1-4) Risk assessment of an open source migration project Authors: Drozdik, S; Kovács, GL; Kochis, PZ Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: OSS 2005. Proceedings of the 1st international conference on open source systems. Genova, 2005. (Page: 246-249) Kopácsi, S Some aspects of ambient intelligence Authors: Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 96-116) Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Sárközy, F; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259) Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2) Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Kovács, GL; Nacsa, J; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484) Distributed processing of complex logistics flows. Authors: Kovács, GL; Kopácsi, S; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) An intelligent design network for manufacturing systems' cooperation. Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516) Simulation of FMS with application of reuse and object-oriented technology. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396) Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Co-operative knowledge processing in software reuse. Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: APPLIED COMPUTING REVIEW (Volume no.: 5, Issue no.: 1, Page: 21-26) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) A knowledge based hybrid system to evaluate flexible manufacturing systems Authors: Kopácsi, S; Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) A hybrid simulation-scheduler-quality control system Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) A knowledge based simulation system for flexible manufacturing Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Vol. 1. Proceedings of the IEEE International Conference, Atlanta, 1993 (Page: 858-863) Knowledge based hybrid simulation of FMS Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of IMACS/IFAC second international conference on mathematical and intelligent models in system simulation, MIM-SS'93 Brussels, 1993 (Page: 89-92) Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems Authors: Létray, Z; Kopácsi, S; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420) A Prolog based manufacturing cell design system Authors: Kovács, G; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97) Kopácsi, Sándor Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) A survey on some aspects of ambient intelligence. Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A.; Morel, G.; Pereira, C. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 2. (Page: 529-540.) Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) A survey on some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC/IFIP/IFORS/IEEE/IMS symposium on control problems in manufacturing. Saint-Etienne, 2006. (Page: 541-552) Some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Acta Polytechnica Hungarica (Volume no.: 3, Issue no.: 1, Page: 35-60) Kovács, G Open source software for the public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computer Science and Information Technologies. Proceedings of the 6th International Workshop CSIT'2004 Budapest, Vol. 1 (Page: 1-8) Open source software and open data standards in public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computational Cybernetics. Proceedings of the ICCC 2004, Second IEEE International Conference Vienna (Page: 421-428) Multimedia technologies provide test scenarios in a national research project Authors: Kovács, G; Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291) An intelligent solution for motion picture restoration Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 177-186) A complete solution for motion picture restoration: scanning, processing, recording Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Vision system for avoidance of lane-departure. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 2000. Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292) Vision system for avoidance of Lane-depature. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 1999. Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62) Vehicle control system for avoidance of lane-departure. Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey, Date: 1999. Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom) System for detection and prevention of unintended lane-departure of vehicles. Authors: Giaone, L; Kovács, G; Bokor, J; Széll, P; Frank, P Date: 1999. Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. Vol. Q. Transportation systems, computer control. (Page: 169-174) Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) Authors: Táncos, A; Kovács, G; Bokor, J Date: 1998. Published by: Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) (Page: 37) Lane-departure detection andcontrol system for commercial vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50) Vision system for lane-departure prevention of vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288) Automatic detection of the lane departure of vehicles. Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101) Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) Authors: Athans, M; Bokor, J; Kovács, G; Szabó, Z Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) (Page: 49) Concurrent engineering approach to support CIM reference model-based FMS design Authors: Kovács, G; Mezgár, I; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 1, Page: 17-27) Hybrid systems for CIM components' configuration/reconfiguration Authors: Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 61-72) CIM reference model based FMS design with concurrent engineering approach Authors: Mezgár, I; Kovács, G; Vészi, A Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Industrial engineering and production management (IEPM'93) Proceedings of the International conference, Mons, 1993. Vol. 2. (Page: 635-644) CE approach to quality assurance of products and production systems Authors: Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Advances in production management systems. Proceedings of the IFIP TC5/WG5.7 fifth international conference on APMS'93. Athens, 1993 (IFIP transactions B-13) (Page: 259-266) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) KB simulation and CE approach to assist in quality assurance of products and production systems Authors: Kovács, G; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Computer integrated manufacturing. Proceedings of the 2nd international conference. Singapore, 1993. Vol. 2. (Page: 161-169) CIM reference model based FMS design with concurrent engineering approach Authors: Kovács, G; Mezgár, I; Vészi, A Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Preprints of the 12th IFAC World Congress, 1993. Vol. 6. (Page: 325-330) A CS-PROLOG based expert system for manufacturing cell design, simulation and animation Authors: Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Information Control Problems in Manufacturing Technology 1992. Selected Papers from the 7th IFAC/IFIP/IFORS/IMACS/ISPE Symposium, Toronto (IFAC Symposia Series, 9304) (Page: 105-109) Concurrent engineering approach to FMS design using a blackboard architecture Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: IFAC-INCOM '92. Toronto, 1992. Preprints. Vol. 2. (Page: 457-462) Design of a machine tool monitoring system Authors: Ruiz, GH; Mazzotti, CG; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: IFAC workshop on automatic control for quality and productivity. ACQP '92. Istambul, 1992. Preprints. Vol. 1. (Page: 61-67) Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166) MAP Training Center as a test-bed for OSI products in manufacturing Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371) Object knowledge representation models for concurrent design for FMS Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Human aspects in computer integrated manufacturing. Proceedings of the IFIPTC5/WG5.3 eight international PROLAMAT conference. Tokyo, 1992 (Page: 779-788) FMS design based on concurrent engineering: a blackboard architecture approach Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 353-362) Cooperative hybrid expert systems for concurrent design of FMS Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Intelligent manufacturing systems. Preprints of the IFAC workshop. Dearborn, 1992 (Page: 51-56) Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems Authors: Létray, Z; Kopácsi, S; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420) A Prolog based manufacturing cell design system Authors: Kovács, G; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97) Pilot plants to assist FMS/CIM evaluation, design and industrial applications Authors: Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 5, Issue no.: 1, Page: 54-60) One-of-a-kind production - a concurrent engineering approach Authors: Kovács, G; Mezgár, I; Szelke, E; Girnt, M Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: One-of-a-kind production. New approaches. Proceedings of the IFIP WG 5.7 working conference. Bremen, 1991 (Page: 143-156) First experiences with a MAP-networked CIM pilot plant Authors: Kovács, G; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125) Concurrent product/production system design and Petri Nets in automated manufacturing systems Authors: Kovács, G; Mezgár, I; Silva, M; Di Cesare, F; Desrochers, AA Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Tutorial notes (Page: 1-200) Concurrent engineering: a way to design intelligent manufacturing systems Authors: Kovács, G; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Flexible Automation 1992. Proceedings of the Japan-USA symposium, San Francisco, 1992. Vol. 1. (Page: 461-466) Application of concurrent engineering in design for one-of-a-kind production Authors: Kovács, G; Mezgár, I; Szelke, E Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Vol. 2 (Page: 956-961) Kovács, GL Knowledge management support for machine tool designers using expert enablers Authors: Nacsa, J; Bueno, R; Alzaga, A; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 18, Issue no.: 7, Page: 561-571) Using open source software in the public administration Authors: Kovács, GL; Drozdik, S; Succi, G; Zuliani, P Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: WMSCI 2005. The 9th world multi-conference on systemics, cybernetics and informatics. Vol. 9. Orlando, 2005. (Page: 75-80) Some interactive multimedia applications in production engineering Authors: Kovács, GL; Haidegger, G; Drozdik, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167) Some aspects of ambient intelligence Authors: Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 96-116) Risk assessment of an open source migration project in the public administration Authors: Kovács, GL; Drozdik, S; Kochis, PZ Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: CSITâ2005. Proceedings of the workshop on computer science and information technologies. Ufa, 2005. Vol. 1. (Page: 1-4) Interactive multimedia for supporting the quality of the production Authors: Kovács, GL; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45) Business growth through European partnerships conference for SME-s. Budapest, 2005. Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: (Length: 141 page) Risk assessment of an open source migration project Authors: Drozdik, S; Kovács, GL; Kochis, PZ Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: OSS 2005. Proceedings of the 1st international conference on open source systems. Genova, 2005. (Page: 246-249) Wearable computer applications in manufacturing systems Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 75-84) Integrated design for sustainability: intelligence for eco-consistent products and services Authors: Michelini, RC; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: EBS REVIEW (Volume no.: 15, Page: 81-94) Szimuláció és tudásbázisú rendszerek alkalmazása magas szintű gyártórendszerek tervezésében és irányításában Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Kihívások a magyar menedzserképzésben a 3. évezred elején. BME IMVT konferencia 2002. Balatonfüred (Page: 74-81) Planning and management of large, distributer systems and projects Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the International Conference in Memoriam John von Neumann (Page: 35-48) Intelligent integrated design for sustainability - products and services Authors: Kovács, GL; Michelini, RC Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Computer Science and Information Technologies. Proceedings of the 5th international workshop CSIT'2003 Ufa, Vol. 1. (Page: 31-38) Digitális mozgókép-restauráló rendszer filmarchívumok számára Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Nemzeti kutatási és fejlesztési programok 2. program. Információs és kommunikációs technológiák (Page: 39-51) BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei Authors: Kovács, GL; Bámer, B; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54) A planning and management infrastructure for large, complex, distributed projects - beyond ERP and SCM Authors: Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: COMPUTERS IN INDUSTRY (Volume no.: 51, Page: 165-183) A digital film-saver for archives Authors: Kovács, GL; Kas, I Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: ERCIM NEWS (Volume no.: 52, Page: 52-53) Recycling technology implementation by the integration of SME operations Authors: Haidegger, G; Kovács, GL; Bámer, B Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615) Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Intelligent, open architecture controller using knowledge server. Authors: Nacsa, J; Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33) Some information management and construction problems of a digital motion picture restoration system. Authors: Kovács, GL; Kas, I Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings of the 4th international workshop on computer science and information technologies. CSIT'2002. Patras Szimuláció és tudásbázisú rendszerek alkalmazása magas szintű gyártórendszerek tervezésében és irányításában. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: BME IMVT konferencia 2002. Kihívások a magyar menedzserképzésben a 3. évezred elején. Balatonfüred (Page: 10-11) Education offered and performed by a research laboratory. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: ITHET 2002. 3rd international conference on information technology based higher education and training. Budapest (Page: 429-432) Supporting SMEs in software requirement gathering in the field of automation. Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 415-420) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Sárközy, F; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259) Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Some problems of a digital motion picture restoration system. Authors: Kovács, GL; Kas, I Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 127-132) Co-operative bidding of SMEs in health care sector. Authors: Mezgár, I; Kovács, GL; Bonfatti, F Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Health data in the information society. Proceedings of MIE2002. Budapest. 2002. (Studies in health technnology and informatics 90.) (Page: 838-842) Alert State Detection and Switching Order Generation at a 400/120 kV Substation using Knowledge Server Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2001. . 18. Published by: Proc. of ISAP2001 Conference. (Intelligent Systems Application to Power Systems) (Length: 5 page) Automatizálás a gépgyártás-technológiában. Authors: Erdélyi, F; Kovács, GL; Somló, J Department: Computer Integrated Manufacturing Laboratory Date: 2001. Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 187-211) Intelligent alert state detection and switching order generation at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Szederkényi, G Date: 2000. Published by: 4th IFAC symposium on fault detection supervision and safety for technical processes. SAFEPROCESS 2000. Preprints. Budapest, 2000. Vol. 2. (Page: 1127-1132) A general model for representing non-manufacturing processes in SMEs; a casy study. Authors: Mezgár, I; Kovács, GL; Timkó, G; Szabó, C Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Second conference on management and control of production and logistics. MCPL'2000. Preprints. Grenoble, 2000. (Page: 6) Some problems of intelligent control of open CNCs and manufacturing cells. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28) A process model and its environment to manage non-manufacturing processes. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFIP 16th world computer congress 2000. Information technology for business management. Beijing, 2000. (Page: 156-163) Technology transfer results achieved by Hungarian SMEs and academic institutions. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC conference on technology transfer in developing countries-automation in infrastructure creation. DECOM-TT 2000. Preprints. Pretoria, 2000. (Page: 150-154) Some technology transfer results: cooperating SMEs and academic institutions in intelligent manufacturing. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: INES 2000. IEEE international conference on intelligent engineering systems. Proceedings. Portoroz, 2000. (Page: 19-22) Computer aided design/computer aided manufacture (CAD/CAM), tutorial. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Proceedings of the 5th international seminar on advanced manufacturing systems. (V. seminario internacional sobre sistemas avanzados de manufactura.) Bogota, 2000. (Page: 76-133) Application of some intelligent tools and means to design robotic systems. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: 3rd EUREL workshop and masterclass. European advanced robotics systems development. Manchester, 2000. Vol. 1. (Page: 1-9) Interactive multimedia as an affordable tool in factory environment. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: ASI'2000. The annual conference of ICIMS-NOE. Workshop on integration in manufacturing and beyond. IIMB'2000. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Bordeaux, 2000. (Page: 6-7) Számítógéppel segített tervezés és gyártás. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: TERMÉSZET VILÁGA (Volume no.: 131, Issue no.: 2, Page: 79-82) Hungarian SMEs and academic institutions - some technology transfer results. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: ERCIM NEWS (Volume no.: 40, Page: 49-50) Co-operative production planning for small- and medium-sized enterprises. Authors: Mezgár, I; Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 64, Page: 37-48) An integrated CAD/CAM system for robotized arc welding. Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 8, Issue no.: 1, Page: 7-18) Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2) PLENT: a European project on SME co-operation. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 18, Issue no.: 3-4, Page: 193-201) A realized virtual enterprise architecture for SMEs. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 111-119) University department - dedicated research laboratory. Is it a real conflict? Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 89-96) Technology transfer day. March 2, 1999, Budapest, Hungary. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: ICIMS NEWS (Volume no.: 20-21, Page: 19) Some technology transfer results achieved in and by Hungarian SMEs and academic institutions. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Leuven, 1999. (Page: session TT1.: 1-2) Computational, AI, and multiagent techniques for design of robotics systems. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Handbook of industrial robotics. (Page: 773-794) Application of AI tools and methods in robotics. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Bánki Donát Polytechnic 1879-1999. Jubilee international conference. Proceedings. Budapest, 1999. 122-99 (Page: 115-120) Management of complex logistics flows, the FLUENT approach. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Leuven, 1999. (Page: 1-2) Flow oriented supply chain management, the FLUENT approach. Authors: Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 125-132) Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Kovács, GL; Nacsa, J; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484) Distributed processing of complex logistics flows. Authors: Kovács, GL; Kopácsi, S; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Minőségmenedzsment és informatika. (Page: 84-137) Knowledge organisation and govern-for-flexibility in manufacturing. Authors: Michelini, RC; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 61-82) Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Flow oriented supply chain management, the FLUENT approach. Authors: Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Advanced control concepts for manufacturing systems. Proceedings of the 2nd AMETMAS-NoE workshop and technology transfer day. St. Petersburg, 2000. (Page: 47-52) Some technology transfer results achieved in and by Hungarian SMEs and academic institutions. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Proceedings. Leuven, 1999. (Page: 222-227) Simulation and control of FMS with application of expert systems. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican-Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 83-89) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8) PLENT: a European project on SME co-operation. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Distributed enterprise, intelligent automation and industrial benchmarking. "Putting information and communication technologies into practice". (Page: 75-84) A virtual enterprise architecture for SMEs. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: GÉPGYÁRTÁS (Volume no.: 38, Issue no.: 9, Page: 17-22) Co-ordination of SME production through a cooperative network. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 167-172) Teaching in a dedicated research laboratory - is it a real conflict? Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: ASI '98. The annual conference of ICIMS-NOE. Life cycle approaches to production systems. Management, control and supervision. Preprints. Bremen, 1998. (Page: 1-6) Some artificial intelligent techniques to design robotic systems. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Intelligent systems for manufacturing. Multi-agent systems and virtual organizations. (Page: 265-278) Harmonizing research and teaching activities in a dedicated research laboratory - Is it a real conflict? Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: PROLAMAT'98 conference. Invited paper. Trento, 1998. Artificial intelligence techniques to design robotic systems. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: LSS '98. Large scale systems: theory and applications. 8th IFAC/IFORS/ IMACS/IFIP symposium. Preprints. Rio Patras, 1998. Vol.1. (Page: 645-654) A distributed planning network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: 1998 IEEE international conference on robotics and automation. Proceedings. Leuven, 1998. Vol. 2. (Page: 1787-1792) Multimedia applications in a virtual enterprise of SME-s. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) Gyártórendszerek szimulációjának, tervezésének és üzemeltetésének néhány problémája. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: (Page: 160) Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105) A network-based manufacturing management system. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 187-197) Co-operative production planning for SMEs'. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: IEPM '97. International conference on industrial engineering and production management Proceedings. Lyon, 1997. Book 2. (Page: 2-11) Co-ordination of SMEs' production through a co-operative network. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 555-560) Organization and technology management issues of joint European projects in a factory and in a research institute. Authors: Kovács, GL; Nacsa, J; Lepsényi, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 16, Issue no.: 3, Page: 231-242) Some communication problems of KB-controlled manufacturing systems. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 10, Issue no.: 2, Page: 225-230) An intelligent design network for manufacturing systems' cooperation. Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516) A multimedia design network for manufacturing systems' management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339) Multimedia design network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K) Termelő és szolgáltató rendszerek számítógépes tervezése és szimulációja. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 349-390) An intelligent planning network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Computer applications in production and engineering. IFIP TC5 international conference. Detroit, 1997. (Page: 606-616) Simulation of FMS with application of reuse and object-oriented technology. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396) Software reuse and standardization for SMEs - the CIM-EXP perspective. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: STANDARD VIEW (Volume no.: 5, Issue no.: 2, Page: 58-60) Experiments with a knowledge-based simulator and scheduler system. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Computer applications in production and engineering. IFIP TC5 international conference. Detroit, 1997. (Page: 370-379) AI in manufacturing: application to FMS simulation, scheduling and control. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Computer-assisted management and control of manufacturing systems.( Advanced manufacturing series.) (Page: 83-117) Application of software reuse and object oriented methodologies for the modeling of manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3) Co-operative knowledge processing in software reuse. Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: APPLIED COMPUTING REVIEW (Volume no.: 5, Issue no.: 1, Page: 21-26) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Multimedia requirements for management and control of manufacturing systems. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 117-122) Knowledge representation and processing in a two-level supervisory industrial environment. Authors: Groumpos, PP; Troupis, DG; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 116-121) Some modeling, simulation and control problems of advanced manufacturing systems. Authors: Groumpos, PP; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Commemoration workshop. Greek-Hungarian science and technology cooperation. Athens, 1997. (Page: 1-4) Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Reuse in a simulation environment for flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7) SSQL, a set based logic query for a distributed software repository. Authors: Succi, G; Valerio, O; Vernazza, T; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 5, Issue no.: 1, Page: 23-40) An integrated CAD/CAM system for robotized arc welding. Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 287-292) A coupled system for re-engineering of robust manufacturing system configurations. Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL Date: 1996. Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64) Some experiments with a knowledge based simulator-scheduler. Authors: Kovács, GL; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings of the Japan-USA symposium on flexible automation. Boston, 1996. Vol. 2. (Page: 1337-1344) Some communication problems of KB controlled manufacturing systems. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 829-834) Organisation and technology management issues of joint European projects in a factory and in a research institute. Authors: Kovács, GL; Nacsa, J; Lepsényi, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Quality, logistics and technology management. Proceedings of the ESPRIT-COPERNICUS symposium. Budapest, 1996. (Page: 238-252) Mechatronikai K+F a SZTAKI CIM Laborjában. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Mechatronika '96. 7. Mechatroninfo konferencia előadásainak anyaga. Budapest, 1996. (Page: 13-14) Intelligent control of manufacturing systems using open communications. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180) Design of flexible manufacturing systems with reuse in a KB simulation environment. Authors: Kovács, GL; Kopácsi, S; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357) Changing paradigms in manufacturing automation. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings of the 1996 IEEE international conference on robotics and automation. Minneapolis, 1996. Vol. 4. (Page: 3343-3348) Application of knowledge based control for an integrated robotized CAD/CAM arc welding system. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: CAD/CAM. Robotics and factories of the future. Proceedings of the 12th international conference. London, 1996. (Page: 381-386) AI in manufacturing: application to FMS simulation, scheduling and control. Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Computer-assisted management and control of manufacturing systems. Chapter 3. (Page: 83-115) Creating reusable assets from simulation models of flexible manufacturing systems. Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360) CAD/CAM integration of an arc welding cell for one-of-a-kind production Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346) A system to assist robotized welding for SME's Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 381-386) Some problems of knowledge based control of manufacturing systems using open communication Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Applications of artificial intelligence in engieneering X. AIENG '95. Tenth international conference. Udine, 1995 (Page: 349-356) A PC-based OSI system to assist robotized welding Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Opening productive partnerships. Concentrated efforts for Europe. Proceedings of the conference in integration in manufacturing. Vienna, 1995. (Advances in design and manufacturing 6.) (Page: 159-165) A PC-based offline programming system to assist robotized welding Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538) Problems of products' and production systems' quality Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Zbornik z 15. konferencie. QUALITY '95. Kvalita práce, produkcie a zivota. Piestany, 1995 (Page: 127-132) Towards intelligent and open control of manufacturing systems Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 1. (Page: 165-169) Knowledge based control of manufacturing systems using open communication Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Large scale systems: theory and applications. IFAC/IFORS/IMACS symposium. Preprints. London, 1995. Vol. 2. (Page: 693-697) Open systems in manufacturing, European and world-wide harmonized initiatives Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 47-54) Knowledge based control and open communication of advanced manufacturing systems Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 11th ISPA/IEE/IFAC international conference on CAD/CAM, robotics & factories of the future. Cars and FOF '95. Pereira, 1995. Vol. 1. (Page: 454-459) Intelligent control of FMS - open communications Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: PUBLICATIONS OF THE UNIVERSITY OF MISKOLC. SERIES C. MECHANICAL ENGINEERING (Volume no.: 45, Issue no.: 1, Page: 93-101) Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: GEPGYARTASTECHNOLOGIA (Volume no.: 35, Issue no.: 3-4, Page: 117-120) Computer aided design/computer aided manufacturing Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Seminario de sistemas avanzados de manufactura. Seminario de robotica. Pereira, 1995 (Page: 303-355) Changing paradigms in manufacturing automation. Survey paper Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 1. (Page: 13-18) Open systems in manufacturing Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 252-259) Some aspects of knowledge based simulation and control of flexible manufacturing systems Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The first world-congress on intelligent manufacturing processes and systems. Proceedings. Mayagüez-San Juan, 1995. Vol. l. (Page: 63-71) A simulation-scheduling system using hybrid technology Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of the fourth international conference on computer integrated manufacturing and automation technology. Troy, 1994 (Page: 351-356) Interfacing G2 expert system shell with MMS protocol Authors: Kovács, GL; Nagy, G; Gavalcova, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Gensym Users Society worldwide meeting. Washington, 1994 (Page: 1-13) A knowledge based hybrid system to evaluate flexible manufacturing systems Authors: Kopácsi, S; Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302) Cross-National comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, CL; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Advances in global high-technology management. International management of high technology. Vol. 4. Part B (Page: 91-109) Steps towards real-time control using knowledge based simulation of flexible manufacturing systems Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 2nd IFAC workshop on computer software structures integrating AI/KBS systems in process control. Preprints. Lund, 1994 (Page: 88-91) Communication problems of expert systems in manufacturing environment Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: AIRTC'94. Symposium on artificial intelligence in real time control. Preprints. Valencia, 1994 (Page: 377-381) Possibilities of quality asssurance in a virtual manufacturing environment Authors: Mezgár, I; Gavalcová, D; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 61-66) A knowledge based and a hybrid system to evaluate flexible manufacturing systems Authors: Kovács, GL; Nacsa, J; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 IEEE international conference on robotics and automation. Proceedings. San Diego, 1994. Vol. 4. (Page: 3570-3575) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) A hybrid simulation-scheduler-quality control system Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589) Application of expert systems to solve some problems of advanced manufacturing systems Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Moving toward expert systems globally in the 21st century. Second world congress on expert systems. Lisbon/Estoril, 1994 (Page: 1259-1264) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Parallel quality assurance of products and production systems using the CE approach Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: CE94. Concurrent engineering: research and applications. Conference proceedings. Pittsburgh, 1994 (Page: 451-459) Hybrid systems for CIM components' configuration/reconfiguration Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 77-88) Cross-national comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, G; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: JOURNAL OF HIGH TECHNOLOGY MANAGEMENT RESEARCH (Volume no.: 4, Issue no.: 2, Page: 139-155) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Concurrent engineering approach and application of AI to manufacturing Authors: Kovács, GL; Mezgár, I; Vishwanadham, N Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Proceedings of the IEEE International Conference. Tutorial T5 (Page: 255-255) Combining AI means and traditional programming to solve some problems of FMS simulation, scheduling and control Authors: Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Ikinci Türk yapay zeka ve yapay sinir aglari sempozyumu. Istanbul, 1993. /Second Turkish conference on artificial intelligence and artificial neural networks/ (Page: 319-324) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) A knowledge based simulation system for flexible manufacturing Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Vol. 1. Proceedings of the IEEE International Conference, Atlanta, 1993 (Page: 858-863) Knowledge based hybrid simulation of FMS Authors: Kopácsi, S; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of IMACS/IFAC second international conference on mathematical and intelligent models in system simulation, MIM-SS'93 Brussels, 1993 (Page: 89-92) Kovács, GY Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) Konkurrens RGYR tervezés blackboard arhitektúrájú keretrendszerrel Authors: Molina, A; Mezgár, I; Kovács, GY Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 42-46) Kovács, György Understanding enterprise delivery using the "TYPUS metrics"s and the "KILT model". Authors: Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2011. 09. 27. Published by: CSIT 2011. Proceedings of the 13th international workshop on computer science and information technology. Garmisch-Partenkirchen, 2011. Vol. 1. (Volume no.: 1, Page: 1-6.) Application of TYPUS metrics and KILT modell, recycling and resource-efficient REMAKE solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 197-208.) Interactive multimedia and tele-presence in production. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Journal of Physics: Conference Series (Volume no.: 268, Page: 012015) Some iteractive multimedia applications in manufacturing. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 09. Published by: CSIT 2010. Proceedings of the 12th international workshop on computer science and information technologies. Vol. 1. Moscow - St. Petersburg, 2010. (Page: 1-9.) Some interactive multimedia applications in manufacturing Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Abstract book of MURPHYS?2010 Conference (Page: 30) Irányelvek a változtatásokhoz - a ManuFuture kapcsán. Authors: Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2010. 05. Published by: Gépgyártás (Volume no.: 50, Issue no.: Industria, Page: 15-17.) Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Eljárás és berendezés digitálisan tárolt mozgókép-információból mozifilm képkockák előállítására Authors: Palotási, A.; Kas, I.; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. 02. 08. Published by: Szabadalmi okirat (Patent Certificate) (Issue no.: No. 225 393 (P 04 02212)) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Robotics and Automation Authors: Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2009. 08. 27. Published by: Lecture notes for the VIII Seminario Internacional Manufactura Flexible, Robotica-Mecatronica-Automatizacion (Page: 8-40) Hungarian IT technology transfer results and problems - some EU perspectives. Plenary paper. Authors: Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: CSIT 2009. Proceedings of the 11th international workshop on computer science and information technology. Crete, 2009. Vol. 1. (Volume no.: 1, Page: 1-6.) Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s. Authors: Kovács, György; Haidegger, Géza; Stokic, D. Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.) ManuFuture-Hu: a jövőbeli gyártástechnológia magyar víziója, értékteremtéssel a fenntartható gazdasági növekedésért. Authors: Haidegger, Géza; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 16-17.) SME networks for car recycling in Hungary: an agent-based approach. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: A road map to the development of European SME networks: towards collaborative innovation. (Page: 103-115.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Az információtechnológia növekvő szerepe a vállalkozások/vállalatok nemzetközi együttműködésében. Authors: Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Informatika a felsőoktatásban 2008 konferencia. Debrecen, 2008. (Length: 1-4. (CD) page) Some technology transfer achievements of Hungarian SMEs and Academic Institutions - EU perspectives. Authors: Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: ICEE 2008. International conference on engineering education. Pécs, 2008. (Length: 1-6. (CD) page) Car-recycling SME network with agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: ERCIM News (Issue no.: 73, Page: 53-54.) Download article: [pdf] Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs. Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Car recycling - supported by agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: CSIT'2007. Proceedings of the 9th international workshop on computer science and iformation technologies. Krasnousolsk, Ufa, 2007. Vol. 1. (Page: 1-9.) Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) A survey on some aspects of ambient intelligence. Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A.; Morel, G.; Pereira, C. Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 2. (Page: 529-540.) Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Information infrastructures and sustainability Authors: Michelini, RC; Kovács, György Editor: Camarinha-Matos, L Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Emerging solutions for future manufacturing systems IFIP TC 5/WG 5.5 sixth IFIP international conference on information technology for balanced automation systems in manufacturing and services. Vienna, 2004. (Page: 347-356) Management and production control issues of distributed enterprises Authors: Kovács, György Editor: Wang, K; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Knowledge enterprise: intelligent strategies in product design, manufacturing, and management. Proceedings of PROLOMAT 2006, IFIP TC5 international conference. Shanghai, 2006. (Page: 11-20) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Robot applications in sheet-metal forming Authors: Kovács, György; Nacsa, János Editor: Yussupova, N Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: CSIT 2006. Proceedings of the 8th international workshop on computer science and information technologies. Karlsruhe, 2006. Vol. 1. (Page: 22-27) A survey on some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Editor: Dolgui, A Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: INCOM 2006. 12th IFAC/IFIP/IFORS/IEEE/IMS symposium on control problems in manufacturing. Saint-Etienne, 2006. (Page: 541-552) Some aspects of ambient intelligence Authors: Kovács, György; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Acta Polytechnica Hungarica (Volume no.: 3, Issue no.: 1, Page: 35-60) Agent-based solutions to support car recycling Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: ICM 2006. 3rd IEEE international conference on mechatronics. Budapest, 2006. (Page: 282-287) Some robot application issues in sheet-metal forming Authors: Kovács, György; Nacsa, János Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 475-480) Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Kovács, GZ Notes on ? and 1 1 robustness tests. Authors: Kovács, GZ; Hangos, KM Date: 1998. Published by: KIBERNETIKA (Volume no.: 34, Issue no.: 5, Page: 565-578) Robust analysis of distillation column dynamics Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KM Date: 1995. Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338) The relation between u and l1 robust analysis results Authors: Kovács, GZ; Varga, EI; Hangos, KM Date: 1995. Published by: Automatizálás '95 konferencia nemzetközi részvétellel. Automation '95 with international participation. Proceedings. Budapest, 1995. Vol. 1. (Page: 241-250) Kránicz, B Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Kránitz, B A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Lepsényi, I Organization and technology management issues of joint European projects in a factory and in a research institute. Authors: Kovács, GL; Nacsa, J; Lepsényi, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 16, Issue no.: 3, Page: 231-242) Organisation and technology management issues of joint European projects in a factory and in a research institute. Authors: Kovács, GL; Nacsa, J; Lepsényi, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Quality, logistics and technology management. Proceedings of the ESPRIT-COPERNICUS symposium. Budapest, 1996. (Page: 238-252) Levente Attila Kovács A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Lichodziejevski, C. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Lichodziejewski, C. Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Licsár, A A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Little, AC Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Lo Surdo, A Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Létray, Z Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems Authors: Létray, Z; Kopácsi, S; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420) Mambella, E Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Manno, S An intelligent solution for motion picture restoration Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 177-186) A complete solution for motion picture restoration: scanning, processing, recording Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages) A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Mazzotti, CG Design of a machine tool monitoring system Authors: Ruiz, GH; Mazzotti, CG; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: IFAC workshop on automatic control for quality and productivity. ACQP '92. Istambul, 1992. Preprints. Vol. 1. (Page: 61-67) Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) Mezgár, I Co-operative bidding of SMEs in health care sector. Authors: Mezgár, I; Kovács, GL; Bonfatti, F Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Health data in the information society. Proceedings of MIE2002. Budapest. 2002. (Studies in health technnology and informatics 90.) (Page: 838-842) A general model for representing non-manufacturing processes in SMEs; a casy study. Authors: Mezgár, I; Kovács, GL; Timkó, G; Szabó, C Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Second conference on management and control of production and logistics. MCPL'2000. Preprints. Grenoble, 2000. (Page: 6) A process model and its environment to manage non-manufacturing processes. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFIP 16th world computer congress 2000. Information technology for business management. Beijing, 2000. (Page: 156-163) Co-operative production planning for small- and medium-sized enterprises. Authors: Mezgár, I; Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 64, Page: 37-48) PLENT: a European project on SME co-operation. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 18, Issue no.: 3-4, Page: 193-201) A realized virtual enterprise architecture for SMEs. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 111-119) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Minőségmenedzsment és informatika. (Page: 84-137) PLENT: a European project on SME co-operation. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Distributed enterprise, intelligent automation and industrial benchmarking. "Putting information and communication technologies into practice". (Page: 75-84) A virtual enterprise architecture for SMEs. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: GÉPGYÁRTÁS (Volume no.: 38, Issue no.: 9, Page: 17-22) Co-ordination of SME production through a cooperative network. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 167-172) A distributed planning network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: 1998 IEEE international conference on robotics and automation. Proceedings. Leuven, 1998. Vol. 2. (Page: 1787-1792) Multimedia applications in a virtual enterprise of SME-s. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212) A network-based manufacturing management system. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 187-197) Co-operative production planning for SMEs'. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: IEPM '97. International conference on industrial engineering and production management Proceedings. Lyon, 1997. Book 2. (Page: 2-11) Co-ordination of SMEs' production through a co-operative network. Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 555-560) An intelligent design network for manufacturing systems' cooperation. Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516) A multimedia design network for manufacturing systems' management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339) Multimedia design network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K) Termelő és szolgáltató rendszerek számítógépes tervezése és szimulációja. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 349-390) An intelligent planning network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Computer applications in production and engineering. IFIP TC5 international conference. Detroit, 1997. (Page: 606-616) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) A coupled system for re-engineering of robust manufacturing system configurations. Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL Date: 1996. Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64) Problems of products' and production systems' quality Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Zbornik z 15. konferencie. QUALITY '95. Kvalita práce, produkcie a zivota. Piestany, 1995 (Page: 127-132) Possibilities of quality asssurance in a virtual manufacturing environment Authors: Mezgár, I; Gavalcová, D; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 61-66) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) A hybrid simulation-scheduler-quality control system Authors: Kovács, GL; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589) Concurrent engineering approach to support CIM reference model-based FMS design Authors: Kovács, G; Mezgár, I; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 1, Page: 17-27) Application of artificial intelligence to problems in advanced manufacturing systems Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160) Parallel quality assurance of products and production systems using the CE approach Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: CE94. Concurrent engineering: research and applications. Conference proceedings. Pittsburgh, 1994 (Page: 451-459) Hybrid systems for CIM components' configuration/reconfiguration Authors: Mezgár, I; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 77-88) Hybrid systems for CIM components' configuration/reconfiguration Authors: Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 61-72) CIM reference model based FMS design with concurrent engineering approach Authors: Mezgár, I; Kovács, G; Vészi, A Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Industrial engineering and production management (IEPM'93) Proceedings of the International conference, Mons, 1993. Vol. 2. (Page: 635-644) CE approach to quality assurance of products and production systems Authors: Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Advances in production management systems. Proceedings of the IFIP TC5/WG5.7 fifth international conference on APMS'93. Athens, 1993 (IFIP transactions B-13) (Page: 259-266) Tudásalapú gyártórendszer-szimuláció és -termelésütemezés Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36) KB simulation and CE approach to assist in quality assurance of products and production systems Authors: Kovács, G; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Computer integrated manufacturing. Proceedings of the 2nd international conference. Singapore, 1993. Vol. 2. (Page: 161-169) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Concurrent engineering approach and application of AI to manufacturing Authors: Kovács, GL; Mezgár, I; Vishwanadham, N Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Proceedings of the IEEE International Conference. Tutorial T5 (Page: 255-255) CIM reference model based FMS design with concurrent engineering approach Authors: Kovács, G; Mezgár, I; Vészi, A Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Preprints of the 12th IFAC World Congress, 1993. Vol. 6. (Page: 325-330) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) Concurrent engineering approach to FMS design using a blackboard architecture Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: IFAC-INCOM '92. Toronto, 1992. Preprints. Vol. 2. (Page: 457-462) Object knowledge representation models for concurrent design for FMS Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Human aspects in computer integrated manufacturing. Proceedings of the IFIPTC5/WG5.3 eight international PROLAMAT conference. Tokyo, 1992 (Page: 779-788) Konkurrens RGYR tervezés blackboard arhitektúrájú keretrendszerrel Authors: Molina, A; Mezgár, I; Kovács, GY Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 42-46) FMS design based on concurrent engineering: a blackboard architecture approach Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 353-362) Cooperative hybrid expert systems for concurrent design of FMS Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Intelligent manufacturing systems. Preprints of the IFAC workshop. Dearborn, 1992 (Page: 51-56) A Prolog based manufacturing cell design system Authors: Kovács, G; Mezgár, I; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97) One-of-a-kind production - a concurrent engineering approach Authors: Kovács, G; Mezgár, I; Szelke, E; Girnt, M Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: One-of-a-kind production. New approaches. Proceedings of the IFIP WG 5.7 working conference. Bremen, 1991 (Page: 143-156) Concurrent product/production system design and Petri Nets in automated manufacturing systems Authors: Kovács, G; Mezgár, I; Silva, M; Di Cesare, F; Desrochers, AA Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Tutorial notes (Page: 1-200) Concurrent engineering: a way to design intelligent manufacturing systems Authors: Kovács, G; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Flexible Automation 1992. Proceedings of the Japan-USA symposium, San Francisco, 1992. Vol. 1. (Page: 461-466) Application of concurrent engineering in design for one-of-a-kind production Authors: Kovács, G; Mezgár, I; Szelke, E Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Vol. 2 (Page: 956-961) Mezgár, István Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Michelini, R Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Michelini, R. Ambient intelligence as enabling technology for modern business paradigms. Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.) Michelini, R.C. Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Michelini, RC Information infrastructures and sustainability Authors: Michelini, RC; Kovács, György Editor: Camarinha-Matos, L Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Emerging solutions for future manufacturing systems IFIP TC 5/WG 5.5 sixth IFIP international conference on information technology for balanced automation systems in manufacturing and services. Vienna, 2004. (Page: 347-356) Integrated design for sustainability: intelligence for eco-consistent products and services Authors: Michelini, RC; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: EBS REVIEW (Volume no.: 15, Page: 81-94) Intelligent integrated design for sustainability - products and services Authors: Kovács, GL; Michelini, RC Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Computer Science and Information Technologies. Proceedings of the 5th international workshop CSIT'2003 Ufa, Vol. 1. (Page: 31-38) Knowledge organisation and govern-for-flexibility in manufacturing. Authors: Michelini, RC; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 61-82) Molina, A Concurrent engineering approach to FMS design using a blackboard architecture Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: IFAC-INCOM '92. Toronto, 1992. Preprints. Vol. 2. (Page: 457-462) Object knowledge representation models for concurrent design for FMS Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Human aspects in computer integrated manufacturing. Proceedings of the IFIPTC5/WG5.3 eight international PROLAMAT conference. Tokyo, 1992 (Page: 779-788) Konkurrens RGYR tervezés blackboard arhitektúrájú keretrendszerrel Authors: Molina, A; Mezgár, I; Kovács, GY Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 42-46) FMS design based on concurrent engineering: a blackboard architecture approach Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 353-362) Cooperative hybrid expert systems for concurrent design of FMS Authors: Molina, A; Mezgár, I; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Intelligent manufacturing systems. Preprints of the IFAC workshop. Dearborn, 1992 (Page: 51-56) Monostori, L A coupled system for re-engineering of robust manufacturing system configurations. Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL Date: 1996. Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64) Nacsa, J Knowledge management support for machine tool designers using expert enablers Authors: Nacsa, J; Bueno, R; Alzaga, A; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 18, Issue no.: 7, Page: 561-571) Interactive multimedia for supporting the quality of the production Authors: Kovács, GL; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Wearable computer applications in manufacturing systems Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 75-84) Intelligent, open architecture controller using knowledge server. Authors: Nacsa, J; Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33) Supporting SMEs in software requirement gathering in the field of automation. Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 415-420) Alert State Detection and Switching Order Generation at a 400/120 kV Substation using Knowledge Server Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2001. . 18. Published by: Proc. of ISAP2001 Conference. (Intelligent Systems Application to Power Systems) (Length: 5 page) Intelligent alert state detection and switching order generation at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Szederkényi, G Date: 2000. Published by: 4th IFAC symposium on fault detection supervision and safety for technical processes. SAFEPROCESS 2000. Preprints. Budapest, 2000. Vol. 2. (Page: 1127-1132) Some problems of intelligent control of open CNCs and manufacturing cells. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28) An integrated CAD/CAM system for robotized arc welding. Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 8, Issue no.: 1, Page: 7-18) Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2) Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Kovács, GL; Nacsa, J; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Simulation and control of FMS with application of expert systems. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican-Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 83-89) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8) Organization and technology management issues of joint European projects in a factory and in a research institute. Authors: Kovács, GL; Nacsa, J; Lepsényi, I Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 16, Issue no.: 3, Page: 231-242) Some communication problems of KB-controlled manufacturing systems. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 10, Issue no.: 2, Page: 225-230) An integrated CAD/CAM system for robotized arc welding. Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 287-292) Some communication problems of KB controlled manufacturing systems. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 829-834) Organisation and technology management issues of joint European projects in a factory and in a research institute. Authors: Kovács, GL; Nacsa, J; Lepsényi, I Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Quality, logistics and technology management. Proceedings of the ESPRIT-COPERNICUS symposium. Budapest, 1996. (Page: 238-252) Intelligent control of manufacturing systems using open communications. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180) Application of knowledge based control for an integrated robotized CAD/CAM arc welding system. Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: CAD/CAM. Robotics and factories of the future. Proceedings of the 12th international conference. London, 1996. (Page: 381-386) CAD/CAM integration of an arc welding cell for one-of-a-kind production Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346) A system to assist robotized welding for SME's Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 381-386) Some problems of knowledge based control of manufacturing systems using open communication Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Applications of artificial intelligence in engieneering X. AIENG '95. Tenth international conference. Udine, 1995 (Page: 349-356) A PC-based OSI system to assist robotized welding Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Opening productive partnerships. Concentrated efforts for Europe. Proceedings of the conference in integration in manufacturing. Vienna, 1995. (Advances in design and manufacturing 6.) (Page: 159-165) A PC-based offline programming system to assist robotized welding Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538) Towards intelligent and open control of manufacturing systems Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 1. (Page: 165-169) Knowledge based control of manufacturing systems using open communication Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Large scale systems: theory and applications. IFAC/IFORS/IMACS symposium. Preprints. London, 1995. Vol. 2. (Page: 693-697) Open systems in manufacturing, European and world-wide harmonized initiatives Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 47-54) Knowledge based control and open communication of advanced manufacturing systems Authors: Kovács, GL; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: 11th ISPA/IEE/IFAC international conference on CAD/CAM, robotics & factories of the future. Cars and FOF '95. Pereira, 1995. Vol. 1. (Page: 454-459) Interfacing G2 expert system shell with MMS protocol Authors: Kovács, GL; Nagy, G; Gavalcova, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Gensym Users Society worldwide meeting. Washington, 1994 (Page: 1-13) A knowledge based hybrid system to evaluate flexible manufacturing systems Authors: Kopácsi, S; Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302) Steps towards real-time control using knowledge based simulation of flexible manufacturing systems Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 2nd IFAC workshop on computer software structures integrating AI/KBS systems in process control. Preprints. Lund, 1994 (Page: 88-91) Communication problems of expert systems in manufacturing environment Authors: Nacsa, J; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: AIRTC'94. Symposium on artificial intelligence in real time control. Preprints. Valencia, 1994 (Page: 377-381) A knowledge based and a hybrid system to evaluate flexible manufacturing systems Authors: Kovács, GL; Nacsa, J; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 IEEE international conference on robotics and automation. Proceedings. San Diego, 1994. Vol. 4. (Page: 3570-3575) A knowledge based and a hybrid simulation-scheduling system Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790) A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95) A hybrid simulation-scheduler-quality control system for FMS Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662) Concurrent engineering approach to support CIM reference model-based FMS design Authors: Kovács, G; Mezgár, I; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 1, Page: 17-27) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) Integrated application of real-time expert systems for FMS evaluation and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847) Application of expert and traditional program systems for FMS simulation, scheduling and control Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362) OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166) MAP Training Center as a test-bed for OSI products in manufacturing Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371) First experiences with a MAP-networked CIM pilot plant Authors: Kovács, G; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125) Nacsa, János Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Robot applications in sheet-metal forming Authors: Kovács, György; Nacsa, János Editor: Yussupova, N Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: CSIT 2006. Proceedings of the 8th international workshop on computer science and information technologies. Karlsruhe, 2006. Vol. 1. (Page: 22-27) Some robot application issues in sheet-metal forming Authors: Kovács, György; Nacsa, János Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 475-480) Nagy, G Interfacing G2 expert system shell with MMS protocol Authors: Kovács, GL; Nagy, G; Gavalcova, D; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Gensym Users Society worldwide meeting. Washington, 1994 (Page: 1-13) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) Paganelli, P A planning and management infrastructure for large, complex, distributed projects - beyond ERP and SCM Authors: Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: COMPUTERS IN INDUSTRY (Volume no.: 51, Page: 165-183) Co-operative production planning for small- and medium-sized enterprises. Authors: Mezgár, I; Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 64, Page: 37-48) Flow oriented supply chain management, the FLUENT approach. Authors: Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 125-132) Distributed processing of complex logistics flows. Authors: Kovács, GL; Kopácsi, S; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184) Flow oriented supply chain management, the FLUENT approach. Authors: Kovács, GL; Paganelli, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Advanced control concepts for manufacturing systems. Proceedings of the 2nd AMETMAS-NoE workshop and technology transfer day. St. Petersburg, 2000. (Page: 47-52) Palkovics, L Vision system for avoidance of lane-departure. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 2000. Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292) Vision system for avoidance of Lane-depature. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 1999. Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62) Vehicle control system for avoidance of lane-departure. Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey, Date: 1999. Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom) Lane-departure detection andcontrol system for commercial vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50) Vision system for lane-departure prevention of vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288) Automatic detection of the lane departure of vehicles. Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101) Palotási, A. Eljárás és berendezés digitálisan tárolt mozgókép-információból mozifilm képkockák előállítására Authors: Palotási, A.; Kas, I.; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. 02. 08. Published by: Szabadalmi okirat (Patent Certificate) (Issue no.: No. 225 393 (P 04 02212)) Paniti, Imre Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Peper, S CAD/CAM integration of an arc welding cell for one-of-a-kind production Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346) A PC-based offline programming system to assist robotized welding Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538) Peredi, Z Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Perrett, DI Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Popa, A Multimedia technologies provide test scenarios in a national research project Authors: Kovács, G; Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291) Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Puchalski, S. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Razzoli, R.P. Service engineering and extended artefact delivery. Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.) Ronchetti, M Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Ruiz, GH Design of a machine tool monitoring system Authors: Ruiz, GH; Mazzotti, CG; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: IFAC workshop on automatic control for quality and productivity. ACQP '92. Istambul, 1992. Preprints. Vol. 1. (Page: 61-67) Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) Ruotsalainen, Werner Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Savic, I Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Semsey, Vision system for avoidance of lane-departure. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 2000. Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292) Vision system for avoidance of Lane-depature. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 1999. Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62) Vehicle control system for avoidance of lane-departure. Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey, Date: 1999. Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom) Lane-departure detection andcontrol system for commercial vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50) Vision system for lane-departure prevention of vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288) Silva, M Concurrent product/production system design and Petri Nets in automated manufacturing systems Authors: Kovács, G; Mezgár, I; Silva, M; Di Cesare, F; Desrochers, AA Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Tutorial notes (Page: 1-200) Smater, M. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Somló, J Automatizálás a gépgyártás-technológiában. Authors: Erdélyi, F; Kovács, GL; Somló, J Department: Computer Integrated Manufacturing Laboratory Date: 2001. Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 187-211) Sorli, M. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Soumelidis, A Automatic detection of the lane departure of vehicles. Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101) Spuchalski, S. Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Stanescu, A Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Stokic, D Classification of ideas in an industrial innovation management system Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30) Stokic, D. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s. Authors: Kovács, György; Haidegger, Géza; Stokic, D. Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.) Succi, G Using open source software in the public administration Authors: Kovács, GL; Drozdik, S; Succi, G; Zuliani, P Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: WMSCI 2005. The 9th world multi-conference on systemics, cybernetics and informatics. Vol. 9. Orlando, 2005. (Page: 75-80) Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) SSQL, a set based logic query for a distributed software repository. Authors: Succi, G; Valerio, O; Vernazza, T; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 5, Issue no.: 1, Page: 23-40) Succi, GC Open source software for the public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computer Science and Information Technologies. Proceedings of the 6th International Workshop CSIT'2004 Budapest, Vol. 1 (Page: 1-8) Open source software and open data standards in public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computational Cybernetics. Proceedings of the ICCC 2004, Second IEEE International Conference Vienna (Page: 421-428) Szabó, C A general model for representing non-manufacturing processes in SMEs; a casy study. Authors: Mezgár, I; Kovács, GL; Timkó, G; Szabó, C Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Second conference on management and control of production and logistics. MCPL'2000. Preprints. Grenoble, 2000. (Page: 6) Szabó, Z Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) Authors: Athans, M; Bokor, J; Kovács, G; Szabó, Z Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) (Page: 49) Szalay, T Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Szederkényi, G Intelligent alert state detection and switching order generation at the 400/120 kV substation of the Paks Nuclear Power Plant. Authors: Nacsa, J; Kovács, GL; Szederkényi, G Date: 2000. Published by: 4th IFAC symposium on fault detection supervision and safety for technical processes. SAFEPROCESS 2000. Preprints. Budapest, 2000. Vol. 2. (Page: 1127-1132) Szelke, E One-of-a-kind production - a concurrent engineering approach Authors: Kovács, G; Mezgár, I; Szelke, E; Girnt, M Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: One-of-a-kind production. New approaches. Proceedings of the IFIP WG 5.7 working conference. Bremen, 1991 (Page: 143-156) Application of concurrent engineering in design for one-of-a-kind production Authors: Kovács, G; Mezgár, I; Szelke, E Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Vol. 2 (Page: 956-961) Szilvásy, A CAD/CAM integration of an arc welding cell for one-of-a-kind production Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346) A PC-based offline programming system to assist robotized welding Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538) Szirányi, T An intelligent solution for motion picture restoration Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 177-186) A complete solution for motion picture restoration: scanning, processing, recording Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages) A digital motion picture restoration system for film archives Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S Department: Distributed Events Analysis Research Group Date: 2004. Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176) Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I Department: Distributed Events Analysis Research Group Date: 2003. Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517) Széll, L Lane-departure detection andcontrol system for commercial vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50) Vision system for lane-departure prevention of vehicles. Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288) Széll, P Vision system for avoidance of lane-departure. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 2000. Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292) Vision system for avoidance of Lane-depature. Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey, Date: 1999. Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62) Vehicle control system for avoidance of lane-departure. Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey, Date: 1999. Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom) System for detection and prevention of unintended lane-departure of vehicles. Authors: Giaone, L; Kovács, G; Bokor, J; Széll, P; Frank, P Date: 1999. Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. Vol. Q. Transportation systems, computer control. (Page: 169-174) Sárközy, F Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Virtual reality in flexible manufacturing. Authors: Kopácsi, S; Sárközy, F; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259) Timkó, G A general model for representing non-manufacturing processes in SMEs; a casy study. Authors: Mezgár, I; Kovács, GL; Timkó, G; Szabó, C Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Second conference on management and control of production and logistics. MCPL'2000. Preprints. Grenoble, 2000. (Page: 6) Troupis, DG Knowledge representation and processing in a two-level supervisory industrial environment. Authors: Groumpos, PP; Troupis, DG; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 116-121) Trygg, L Cross-National comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, CL; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Advances in global high-technology management. International management of high technology. Vol. 4. Part B (Page: 91-109) Cross-national comparisons of product development in manufacturing Authors: Ettlie, JE; Dreher, G; Kovács, GL; Trygg, L Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: JOURNAL OF HIGH TECHNOLOGY MANAGEMENT RESEARCH (Volume no.: 4, Issue no.: 2, Page: 139-155) Táncos, A Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) Authors: Táncos, A; Kovács, G; Bokor, J Date: 1998. Published by: Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) (Page: 37) Tóth, T A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Uhrik, C Application of an object repository as an example of cooperative knowledge processing. Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Cooperative knowledge processing for engineering design. (Page: 145-164) Urosevic, L. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Valerio, O SSQL, a set based logic query for a distributed software repository. Authors: Succi, G; Valerio, O; Vernazza, T; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 5, Issue no.: 1, Page: 23-40) Varga, EI Robust analysis of distillation column dynamics Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KM Date: 1995. Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338) The relation between u and l1 robust analysis results Authors: Kovács, GZ; Varga, EI; Hangos, KM Date: 1995. Published by: Automatizálás '95 konferencia nemzetközi részvétellel. Automation '95 with international participation. Proceedings. Budapest, 1995. Vol. 1. (Page: 241-250) Vernazza, T SSQL, a set based logic query for a distributed software repository. Authors: Succi, G; Valerio, O; Vernazza, T; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 5, Issue no.: 1, Page: 23-40) Vidnyánszky, Z Smelling human sex hormone-like compounds affects face gender judgment of men Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z Department: Cellular Sensory and Optical Wave Computing Laboratory Date: 2004. Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277) Vishwanadham, N Concurrent engineering approach and application of AI to manufacturing Authors: Kovács, GL; Mezgár, I; Vishwanadham, N Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Robotics and Automation, 1993. Proceedings of the IEEE International Conference. Tutorial T5 (Page: 255-255) Vonderviszt, L CAD/CAM integration of an arc welding cell for one-of-a-kind production Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346) A PC-based offline programming system to assist robotized welding Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538) Vészi, A CIM reference model based FMS design with concurrent engineering approach Authors: Mezgár, I; Kovács, G; Vészi, A Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Industrial engineering and production management (IEPM'93) Proceedings of the International conference, Mons, 1993. Vol. 2. (Page: 635-644) CIM reference model based FMS design with concurrent engineering approach Authors: Kovács, G; Mezgár, I; Vészi, A Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: Preprints of the 12th IFAC World Congress, 1993. Vol. 6. (Page: 325-330) Weck, M CAD/CAM integration of an arc welding cell for one-of-a-kind production Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346) A PC-based offline programming system to assist robotized welding Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538) Zuliani, P Using open source software in the public administration Authors: Kovács, GL; Drozdik, S; Succi, G; Zuliani, P Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: WMSCI 2005. The 9th world multi-conference on systemics, cybernetics and informatics. Vol. 9. Orlando, 2005. (Page: 75-80) Open source software for the public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computer Science and Information Technologies. Proceedings of the 6th International Workshop CSIT'2004 Budapest, Vol. 1 (Page: 1-8) Open source software and open data standards in public administration Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Computational Cybernetics. Proceedings of the ICCC 2004, Second IEEE International Conference Vienna (Page: 421-428) New search