2011.

Understanding Enterprise Delivery Using the TYPUS Metrics and the KILT model

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2011. 09. 27.
Published by: Proc. of the 13th International Workshop on Computer Science and Information Technology (CSIT?2011) (Volume no.: 1, Page: 1-6)

Application of TYPUS Metrics and KILT model in Life-Cycle Management, EU efforts for recycling- and resource-efficient solutions in manufacturing

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2011. 05. 25.
Published by: Proc. of the GYÁRTÁSAUTOMATIZÁLÁS (Factory Automation 2011) conference (Page: 197-208)

Some interactive multimedia applications in manufacturing

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2011.
Published by: Abstract book of MURPHYS?2010 Conference (Page: 30)

Interactive multimedia and tele-presence in production

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2011.
Published by: Journal of Physics: Conference Series (Volume no.: 268, Issue no.: 1, Page: 1-13)

2010.

Some iteractive multimedia applications in manufacturing.

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2010. 09.
Published by: CSIT 2010. Proceedings of the 12th international workshop on computer science and information technologies. Vol. 1. Moscow - St. Petersburg, 2010. (Page: 1-9.)

Irányelvek a változtatásokhoz - a ManuFuture kapcsán.

Authors: Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2010. 05.
Published by: Gépgyártás (Volume no.: 50, Issue no.: Industria, Page: 15-17.)

2009.

Robotics and Automation

Authors: Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2009. 08. 27.
Published by: Lecture notes for the VIII Seminario Internacional Manufactura Flexible, Robotica-Mecatronica-Automatizacion (Page: 8-40)

Hungarian IT technology transfer results and problems - some EU perspectives. Plenary paper.

Authors: Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2009.
Published by: CSIT 2009. Proceedings of the 11th international workshop on computer science and information technology. Crete, 2009. Vol. 1. (Volume no.: 1, Page: 1-6.)

Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s.

Authors: Kovács, György; Haidegger, Géza; Stokic, D.
Department: Computer Integrated Manufacturing Laboratory
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.)

A karbantartás szerepe az élettartamra tervezésben.

Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Department: Computer Integrated Manufacturing Laboratory
Date: 2009.
Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.)

Managing maintenance in life-cycle engineering.

Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Editor: Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.)

Role of maintenance in life-cycle engineering.

Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János
Department: Computer Integrated Manufacturing Laboratory
Date: 2009.
Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.)

Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs.

Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G.
Editor: Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2009.
Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.)

2008.

Some technology transfer achievements of Hungarian SMEs and Academic Institutions - EU perspectives.

Authors: Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2008.
Published by: ICEE 2008. International conference on engineering education. Pécs, 2008. (Length: 1-6. (CD) page)

Car-recycling SME network with agent-based solutions.

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2008.
Published by: ERCIM News (Issue no.: 73, Page: 53-54.)
Download article: [pdf]

Az információtechnológia növekvő szerepe a vállalkozások/vállalatok nemzetközi együttműködésében.

Authors: Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2008.
Published by: Informatika a felsőoktatásban 2008 konferencia. Debrecen, 2008. (Length: 1-4. (CD) page)

Intelligence management of product life-cycle - a maintenance view.

Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2008.
Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.)

SME networks for car recycling in Hungary: an agent-based approach.

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2008.
Published by: A road map to the development of European SME networks: towards collaborative innovation. (Page: 103-115.)

ManuFuture-Hu: a jövőbeli gyártástechnológia magyar víziója, értékteremtéssel a fenntartható gazdasági növekedésért.

Authors: Haidegger, Géza; Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2008.
Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 16-17.)

2007.

Eljárás és berendezés digitálisan tárolt mozgókép-információból mozifilm képkockák előállítására

Authors: Palotási, A.; Kas, I.; Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2007. 02. 08.
Published by: Szabadalmi okirat (Patent Certificate) (Issue no.: No. 225 393 (P 04 02212))

Multi-agent approach for managing production SME networks for optimising estimated costs/benefits.

Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M.
Editor: Monostori, László
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.)

Car recycling - supported by agent-based solutions.

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: CSIT'2007. Proceedings of the 9th international workshop on computer science and iformation technologies. Krasnousolsk, Ufa, 2007. Vol. 1. (Page: 1-9.)

Ambient intelligence as enabling technology for modern business paradigms.

Authors: Kopácsi, Sándor; Kovács, György; Anufriev, A.; Michelini, R.
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: Robotics and Computer Integrated Manufacturing (Volume no.: 23, Issue no.: 2, Page: 242-256.)

Tooling for novel ISF-incremental sheet forming.

Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János
Editor: Dudás, I.; Szabó, O.; Varga, Gy.
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.)

Service engineering and extended artefact delivery.

Authors: Accacia, G.M.; Kopácsi, Sándor; Kovács, György; Michelini, R.C.; Razzoli, R.P.
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: Knowledge and technology management in virtual organisations. (Page: 24-68.)

Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz.

Authors: Paniti, Imre; Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.)

Recycling technologies for end-of-life vehicles based on multi-agent software solutions.

Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S.
Editor: Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.)

Agent-based Predictive Maintenance of Machine Tools

Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116)

National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs.

Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.)

A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére.

Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.)

Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s.

Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.)

Intelligens hálózatú gyártórendszerek.

Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György
Editor: Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2007.
Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.)

2006.

Some aspects of ambient intelligence

Authors: Kovács, György; Kopácsi, Sándor
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: Acta Polytechnica Hungarica (Volume no.: 3, Issue no.: 1, Page: 35-60)

Agent-based solutions to support car recycling

Authors: Kovács, György; Haidegger, Géza
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: ICM 2006. 3rd IEEE international conference on mechatronics. Budapest, 2006. (Page: 282-287)

Some robot application issues in sheet-metal forming

Authors: Kovács, György; Nacsa, János
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 475-480)

A survey on some aspects of ambient intelligence

Authors: Kovács, György; Kopácsi, Sándor
Editor: Dolgui, A
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: INCOM 2006. 12th IFAC/IFIP/IFORS/IEEE/IMS symposium on control problems in manufacturing. Saint-Etienne, 2006. (Page: 541-552)

Robot applications in sheet-metal forming

Authors: Kovács, György; Nacsa, János
Editor: Yussupova, N
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: CSIT 2006. Proceedings of the 8th international workshop on computer science and information technologies. Karlsruhe, 2006. Vol. 1. (Page: 22-27)

Management and production control issues of distributed enterprises

Authors: Kovács, György
Editor: Wang, K; Kovács, György
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: Knowledge enterprise: intelligent strategies in product design, manufacturing, and management. Proceedings of PROLOMAT 2006, IFIP TC5 international conference. Shanghai, 2006. (Page: 11-20)

Ambient intelligence in product life-cycle management

Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965)

A survey on some aspects of ambient intelligence.

Authors: Kovács, György; Kopácsi, Sándor
Editor: Dolgui, A.; Morel, G.; Pereira, C.
Department: Computer Integrated Manufacturing Laboratory
Date: 2006.
Published by: INCOM 2006. 12th IFAC symposium on information control problems in manufacturing. Saint-Etienne, 2006. Vol. 2. (Page: 529-540.)

2005.

Interactive multimedia for supporting the quality of the production

Authors: Kovács, GL; Haidegger, G; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45)

Business growth through European partnerships conference for SME-s. Budapest, 2005.

Authors: Kovács, GL; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: (Length: 141 page)

Risk assessment of an open source migration project

Authors: Drozdik, S; Kovács, GL; Kochis, PZ
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: OSS 2005. Proceedings of the 1st international conference on open source systems. Genova, 2005. (Page: 246-249)

Risk assessment of an open source migration project in the public administration

Authors: Kovács, GL; Drozdik, S; Kochis, PZ
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: CSIT’2005. Proceedings of the workshop on computer science and information technologies. Ufa, 2005. Vol. 1. (Page: 1-4)

Some aspects of ambient intelligence

Authors: Kovács, GL; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: Proceedings of the 6th international symposium of Hungarian researchers on computational intelligence. Budapest, 2005. (Page: 96-116)

Knowledge management support for machine tool designers using expert enablers

Authors: Nacsa, J; Bueno, R; Alzaga, A; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (Volume no.: 18, Issue no.: 7, Page: 561-571)

Using open source software in the public administration

Authors: Kovács, GL; Drozdik, S; Succi, G; Zuliani, P
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: WMSCI 2005. The 9th world multi-conference on systemics, cybernetics and informatics. Vol. 9. Orlando, 2005. (Page: 75-80)

Some interactive multimedia applications in production engineering

Authors: Kovács, GL; Haidegger, G; Drozdik, S
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167)

Information infrastructures and sustainability

Authors: Michelini, RC; Kovács, György
Editor: Camarinha-Matos, L
Department: Computer Integrated Manufacturing Laboratory
Date: 2005.
Published by: Emerging solutions for future manufacturing systems IFIP TC 5/WG 5.5 sixth IFIP international conference on information technology for balanced automation systems in manufacturing and services. Vienna, 2004. (Page: 347-356)

2004.

Interactive multimedia test scenarios in digital factory projects

Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A
Department: Computer Integrated Manufacturing Laboratory
Date: 2004.
Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455)

Smelling human sex hormone-like compounds affects face gender judgment of men

Authors: Kovács, GY; Gulyás, B; Savic, I; Perrett, DI; Cornwell, RE; Little, AC; Jones, BC; Burt, DM; Gál, V; Vidnyánszky, Z
Department: Cellular Sensory and Optical Wave Computing Laboratory
Date: 2004.
Published by: NEUROREPORT (Volume no.: 15, Issue no.: 8, Page: 1275-1277)

A digital motion picture restoration system for film archives

Authors: Czúni, L; Hanis, A; Levente Attila Kovács; Kránitz, B; Licsár, A; Szirányi, T; Kas, I; Kovács, G; Manno, S
Department: Distributed Events Analysis Research Group
Date: 2004.
Published by: SMPTE MOTION IMAGING JOURNAL (Volume no.: 113, Issue no.: 5-6, Page: 170-176)

Classification of ideas in an industrial innovation management system

Authors: Kopácsi, S; Kovács, György; Stokic, D; Campos, AR
Department: Computer Integrated Manufacturing Laboratory
Date: 2004.
Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 21-30)

A complete solution for motion picture restoration: scanning, processing, recording

Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T; Hanis, A
Department: Cellular Sensory and Optical Wave Computing Laboratory
Date: 2004.
Published by: Advanced Control Strategies for Social and Economic Systems. Proceedings of ACS' 04 IFAC Multitrack Conference Vienna (Page: 6 pages)

Open source software and open data standards in public administration

Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC
Department: Computer Integrated Manufacturing Laboratory
Date: 2004.
Published by: Computational Cybernetics. Proceedings of the ICCC 2004, Second IEEE International Conference Vienna (Page: 421-428)

Multimedia technologies provide test scenarios in a national research project

Authors: Kovács, G; Haidegger, G; Popa, A
Department: Computer Integrated Manufacturing Laboratory
Date: 2004.
Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291)

An intelligent solution for motion picture restoration

Authors: Kovács, G; Kas, I; Manno, S; Czúni, L; Szirányi, T
Department: Cellular Sensory and Optical Wave Computing Laboratory
Date: 2004.
Published by: Professional Practice in AI. Proceedings of the 18th IFIP World Computer Congress 2004, Toulouse (Page: 177-186)

Open source software for the public administration

Authors: Kovács, G; Drozdik, SZ; Zuliani, P; Succi, GC
Department: Computer Integrated Manufacturing Laboratory
Date: 2004.
Published by: Computer Science and Information Technologies. Proceedings of the 6th International Workshop CSIT'2004 Budapest, Vol. 1 (Page: 1-8)

2003.

A digital film-saver for archives

Authors: Kovács, GL; Kas, I
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: ERCIM NEWS (Volume no.: 52, Page: 52-53)

A planning and management infrastructure for large, complex, distributed projects - beyond ERP and SCM

Authors: Kovács, GL; Paganelli, P
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 51, Page: 165-183)

Recycling technology implementation by the integration of SME operations

Authors: Haidegger, G; Kovács, GL; Bámer, B
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615)

Clustering individual truck owners - the implementation of novel ICT solutions

Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210)

Digital motion picture restoration system for film archives (DIMORF). A complex solution for film scanning, processing and recording

Authors: Bölecz, M; Czúni, L; Gál, B; Hanis, A; Levente Attila Kovács; Kránicz, B; Licsár, A; Szirányi, T; Kovács, G; Manno, S; Kas, I
Department: Distributed Events Analysis Research Group
Date: 2003.
Published by: Proceedings of the International Broadcasting Convention. IBC 2003. Amsterdam (Page: 509-517)

BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei

Authors: Kovács, GL; Bámer, B; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54)

Digitális mozgókép-restauráló rendszer filmarchívumok számára

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Nemzeti kutatási és fejlesztési programok 2. program. Információs és kommunikációs technológiák (Page: 39-51)

Integrated design for sustainability: intelligence for eco-consistent products and services

Authors: Michelini, RC; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: EBS REVIEW (Volume no.: 15, Page: 81-94)

Szimuláció és tudásbázisú rendszerek alkalmazása magas szintű gyártórendszerek tervezésében és irányításában

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Kihívások a magyar menedzserképzésben a 3. évezred elején. BME IMVT konferencia 2002. Balatonfüred (Page: 74-81)

Planning and management of large, distributer systems and projects

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Proceedings of the International Conference in Memoriam John von Neumann (Page: 35-48)

Intelligent integrated design for sustainability - products and services

Authors: Kovács, GL; Michelini, RC
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Computer Science and Information Technologies. Proceedings of the 5th international workshop CSIT'2003 Ufa, Vol. 1. (Page: 31-38)

Wearable computer applications in manufacturing systems

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2003.
Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 75-84)

2002.

Are present multimedia technologies good enough for applications in idustrial environment?

Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110)

Some problems of a digital motion picture restoration system.

Authors: Kovács, GL; Kas, I
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 127-132)

Co-operative bidding of SMEs in health care sector.

Authors: Mezgár, I; Kovács, GL; Bonfatti, F
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: Health data in the information society. Proceedings of MIE2002. Budapest. 2002. (Studies in health technnology and informatics 90.) (Page: 838-842)

Virtual reality in flexible manufacturing.

Authors: Kopácsi, S; Sárközy, F; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 254-259)

Supporting SMEs in software requirement gathering in the field of automation.

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: 11th international workshop on robotics in Alpe-Adria-Danube region. RAAD 2002. Proceedings. Balatonfüred (Page: 415-420)

Some information management and construction problems of a digital motion picture restoration system.

Authors: Kovács, GL; Kas, I
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: Proceedings of the 4th international workshop on computer science and information technologies. CSIT'2002. Patras

Szimuláció és tudásbázisú rendszerek alkalmazása magas szintű gyártórendszerek tervezésében és irányításában.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: BME IMVT konferencia 2002. Kihívások a magyar menedzserképzésben a 3. évezred elején. Balatonfüred (Page: 10-11)

Education offered and performed by a research laboratory.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: ITHET 2002. 3rd international conference on information technology based higher education and training. Budapest (Page: 429-432)

Intelligent, open architecture controller using knowledge server.

Authors: Nacsa, J; Kovács, GL; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 2002.
Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33)

2001.

Automatizálás a gépgyártás-technológiában.

Authors: Erdélyi, F; Kovács, GL; Somló, J
Department: Computer Integrated Manufacturing Laboratory
Date: 2001.
Published by: A technológia helyzete és jövője. (Magyarország az ezredfordulón. Stratégiai kutatások a Magyar Tudományos Akadémián. Műhelytanulmányok.) (Page: 187-211)

Alert State Detection and Switching Order Generation at a 400/120 kV Substation using Knowledge Server

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2001. . 18.
Published by: Proc. of ISAP2001 Conference. (Intelligent Systems Application to Power Systems) (Length: 5 page)

2000.

Interactive multimedia as an affordable tool in factory environment.

Authors: Haidegger, G; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: ASI'2000. The annual conference of ICIMS-NOE. Workshop on integration in manufacturing and beyond. IIMB'2000. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Bordeaux, 2000. (Page: 6-7)

Application of some intelligent tools and means to design robotic systems.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: 3rd EUREL workshop and masterclass. European advanced robotics systems development. Manchester, 2000. Vol. 1. (Page: 1-9)

Számítógéppel segített tervezés és gyártás.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: TERMÉSZET VILÁGA (Volume no.: 131, Issue no.: 2, Page: 79-82)

Hungarian SMEs and academic institutions - some technology transfer results.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: ERCIM NEWS (Volume no.: 40, Page: 49-50)

Co-operative production planning for small- and medium-sized enterprises.

Authors: Mezgár, I; Kovács, GL; Paganelli, P
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (Volume no.: 64, Page: 37-48)

Computer aided design/computer aided manufacture (CAD/CAM), tutorial.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: Proceedings of the 5th international seminar on advanced manufacturing systems. (V. seminario internacional sobre sistemas avanzados de manufactura.) Bogota, 2000. (Page: 76-133)

Some technology transfer results: cooperating SMEs and academic institutions in intelligent manufacturing.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: INES 2000. IEEE international conference on intelligent engineering systems. Proceedings. Portoroz, 2000. (Page: 19-22)

A general model for representing non-manufacturing processes in SMEs; a casy study.

Authors: Mezgár, I; Kovács, GL; Timkó, G; Szabó, C
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: Second conference on management and control of production and logistics. MCPL'2000. Preprints. Grenoble, 2000. (Page: 6)

Intelligent alert state detection and switching order generation at the 400/120 kV substation of the Paks Nuclear Power Plant.

Authors: Nacsa, J; Kovács, GL; Szederkényi, G
Date: 2000.
Published by: 4th IFAC symposium on fault detection supervision and safety for technical processes. SAFEPROCESS 2000. Preprints. Budapest, 2000. Vol. 2. (Page: 1127-1132)

Some problems of intelligent control of open CNCs and manufacturing cells.

Authors: Kovács, GL; Nacsa, J; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28)

A process model and its environment to manage non-manufacturing processes.

Authors: Kovács, GL; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: IFIP 16th world computer congress 2000. Information technology for business management. Beijing, 2000. (Page: 156-163)

Technology transfer results achieved by Hungarian SMEs and academic institutions.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 2000.
Published by: IFAC conference on technology transfer in developing countries-automation in infrastructure creation. DECOM-TT 2000. Preprints. Pretoria, 2000. (Page: 150-154)

Vision system for avoidance of lane-departure.

Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey,
Date: 2000.
Published by: VEHICLE SYSTEM DYNAMICS (Volume no.: 33, Issue no.: SUPPLEMENT, Page: 282-292)

1999.

Distributed processing of complex logistics flows.

Authors: Kovács, GL; Kopácsi, S; Paganelli, P
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Applied modelling and simulation. Proceedings of the IASTED international conference. Cairns, 1999. (Page: 179-184)

Intelligent decision support system at the 400/120 kV substation of the Paks Nuclear Power Plant.

Authors: Kovács, GL; Nacsa, J; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: INES '99. 1999 IEEE international conference on intelligent engineering systems. Proceedings. Poprad, 1999. (Page: 479-484)

Flow oriented supply chain management, the FLUENT approach.

Authors: Kovács, GL; Paganelli, P
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 125-132)

Management of complex logistics flows, the FLUENT approach.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Leuven, 1999. (Page: 1-2)

Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems.

Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189)

A vállalat egészét átfogó informatikai rendszer koncepciója.

Authors: Haidegger, G; Kovács, GL; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Minőségmenedzsment és informatika. (Page: 84-137)

Some technology transfer results achieved in and by Hungarian SMEs and academic institutions.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Proceedings. Leuven, 1999. (Page: 222-227)

Flow oriented supply chain management, the FLUENT approach.

Authors: Kovács, GL; Paganelli, P
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Advanced control concepts for manufacturing systems. Proceedings of the 2nd AMETMAS-NoE workshop and technology transfer day. St. Petersburg, 2000. (Page: 47-52)

Application of an object repository as an example of cooperative knowledge processing.

Authors: Kovács, GL; Jaccucci, G; Lo Surdo, A; Mambella, E; Ronchetti, M; Succi, G; Uhrik, C; Cardino, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Cooperative knowledge processing for engineering design. (Page: 145-164)

Knowledge organisation and govern-for-flexibility in manufacturing.

Authors: Michelini, RC; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Cooperative knowledge processing for engineering design. (Page: 61-82)

Application of AI tools and methods in robotics.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Bánki Donát Polytechnic 1879-1999. Jubilee international conference. Proceedings. Budapest, 1999. 122-99 (Page: 115-120)

Computational, AI, and multiagent techniques for design of robotics systems.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Handbook of industrial robotics. (Page: 773-794)

Intelligent applications at the 400/120 kV substation of the Paks Nuclear Power Plant.

Authors: Nacsa, J; Kovács, GL; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: IEEE PowerTech '99. International conference on electric power engineering. Budapest, 1999. (Page: Session 5: SCADA and AI tools: no. 2. : 1-2)

An integrated CAD/CAM system for robotized arc welding.

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 8, Issue no.: 1, Page: 7-18)

System for detection and prevention of unintended lane-departure of vehicles.

Authors: Giaone, L; Kovács, G; Bokor, J; Széll, P; Frank, P
Date: 1999.
Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. Vol. Q. Transportation systems, computer control. (Page: 169-174)

Vehicle control system for avoidance of lane-departure.

Authors: Kovács, G; Széll, P; Bokor, J; Palkovics, L; Gianone, L; Semsey,
Date: 1999.
Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)

PLENT: a European project on SME co-operation.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 18, Issue no.: 3-4, Page: 193-201)

A realized virtual enterprise architecture for SMEs.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 111-119)

Some technology transfer results achieved in and by Hungarian SMEs and academic institutions.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: ASI '99. Advanced Summer Institute '99. ICIMS-NOE. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Leuven, 1999. (Page: session TT1.: 1-2)

Technology transfer day. March 2, 1999, Budapest, Hungary.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: ICIMS NEWS (Volume no.: 20-21, Page: 19)

University department - dedicated research laboratory. Is it a real conflict?

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1999.
Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 89-96)

Vision system for avoidance of Lane-depature.

Authors: Palkovics, L; Kovács, G; Gianone, L; Bokor, J; Széll, P; Semsey,
Date: 1999.
Published by: 16th IAVSD symposium. Pretoria, 1999. (Page: 60-62)

1998.

Harmonizing research and teaching activities in a dedicated research laboratory - Is it a real conflict?

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: PROLAMAT'98 conference. Invited paper. Trento, 1998.

Some artificial intelligent techniques to design robotic systems.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: Intelligent systems for manufacturing. Multi-agent systems and virtual organizations. (Page: 265-278)

Teaching in a dedicated research laboratory - is it a real conflict?

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: ASI '98. The annual conference of ICIMS-NOE. Life cycle approaches to production systems. Management, control and supervision. Preprints. Bremen, 1998. (Page: 1-6)

Artificial intelligence techniques to design robotic systems.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: LSS '98. Large scale systems: theory and applications. 8th IFAC/IFORS/ IMACS/IFIP symposium. Preprints. Rio Patras, 1998. Vol.1. (Page: 645-654)

A distributed planning network for manufacturing systems management.

Authors: Kovács, GL; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: 1998 IEEE international conference on robotics and automation. Proceedings. Leuven, 1998. Vol. 2. (Page: 1787-1792)

Gyártórendszerek szimulációjának, tervezésének és üzemeltetésének néhány problémája.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: (Page: 160)

Interactive multimedia applications at the shop floor.

Authors: Haidegger, G; Kovács, GL; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22)

Multimedia applications in a virtual enterprise of SME-s.

Authors: Kovács, GL; Mezgár, I; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212)

Co-ordination of SME production through a cooperative network.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: JOURNAL OF INTELLIGENT MANUFACTURING (Volume no.: 9, Issue no.: 2, Page: 167-172)

A virtual enterprise architecture for SMEs.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: GÉPGYÁRTÁS (Volume no.: 38, Issue no.: 9, Page: 17-22)

Lane-departure detection andcontrol system for commercial vehicles.

Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L
Date: 1998.
Published by: 1998 IEEE international conference on intelligent vehicles. IV 98. Stuttgart, 1998. (Page: 46-50)

Notes on ? and 1 1 robustness tests.

Authors: Kovács, GZ; Hangos, KM
Date: 1998.
Published by: KIBERNETIKA (Volume no.: 34, Issue no.: 5, Page: 565-578)

Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.)

Authors: Táncos, A; Kovács, G; Bokor, J
Date: 1998.
Published by: Az inverzinga LQ-szabályozása. (Technical report of the Systems and Control Laboratory, SCL-006-1998.) (Page: 37)

Vision system for lane-departure prevention of vehicles.

Authors: Kovács, G; Bokor, J; Palkovics, L; Gianone, L; Semsey, ; Széll, L
Date: 1998.
Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Előadások.Budapest, 1998. (Page: 277-288)

Intelligent control applications of open CNCs using G2.

Authors: Nacsa, J; Haidegger, G; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9)

PLENT: a European project on SME co-operation.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: Distributed enterprise, intelligent automation and industrial benchmarking. "Putting information and communication technologies into practice". (Page: 75-84)

Intelligent control applications of open CNCs using G2.

Authors: Nacsa, J; Haidegger, G; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8)

Simulation and control of FMS with application of expert systems.

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1998.
Published by: Mexican-Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 83-89)

1997.

AI in manufacturing: application to FMS simulation, scheduling and control.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Computer-assisted management and control of manufacturing systems.( Advanced manufacturing series.) (Page: 83-117)

Application of software reuse and object oriented methodologies for the modeling of manufacturing systems.

Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, PP
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: ASI '97. Advanced Summer Institute '97. Annual conference of ICIM-NOE (integrated manufacturing systems-network of excellence in intelligent control). Life cycle approaches to production systems. Preprints. Budapest, 1997. (Page: 1-3)

Experiments with a knowledge-based simulator and scheduler system.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Computer applications in production and engineering. IFIP TC5 international conference. Detroit, 1997. (Page: 370-379)

Software reuse and standardization for SMEs - the CIM-EXP perspective.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: STANDARD VIEW (Volume no.: 5, Issue no.: 2, Page: 58-60)

Design of flexible manufacturing systems with reuse in a KB simulation environment.

Authors: Kovács, GL; Kopácsi, S; Kmecs, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 391-396)

Co-operative knowledge processing in software reuse.

Authors: Kopácsi, S; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: APPLIED COMPUTING REVIEW (Volume no.: 5, Issue no.: 1, Page: 21-26)

A vállalat egészét átfogó informatikai rendszer koncepciója.

Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150)

Számítógépes gyártásirányítás.

Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315)

Some modeling, simulation and control problems of advanced manufacturing systems.

Authors: Groumpos, PP; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Commemoration workshop. Greek-Hungarian science and technology cooperation. Athens, 1997. (Page: 1-4)

Knowledge representation and processing in a two-level supervisory industrial environment.

Authors: Groumpos, PP; Troupis, DG; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 116-121)

Multimedia requirements for management and control of manufacturing systems.

Authors: Haidegger, G; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 117-122)

Simulation of FMS with application of reuse and object-oriented technology.

Authors: Kovács, GL; Kopácsi, S; Kmecs, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: ICRA 97. IEEE international conference on robotics and automation. Abstracts. Albuquerque, 1997. (Page: 582-588)

An intelligent planning network for manufacturing systems management.

Authors: Kovács, GL; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Computer applications in production and engineering. IFIP TC5 international conference. Detroit, 1997. (Page: 606-616)

Co-ordination of SMEs' production through a co-operative network.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 555-560)

Co-operative production planning for SMEs'.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: IEPM '97. International conference on industrial engineering and production management Proceedings. Lyon, 1997. Book 2. (Page: 2-11)

A network-based manufacturing management system.

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 187-197)

Automatic detection of the lane departure of vehicles.

Authors: Soumelidis, A; Kovács, G; Bokor, J; Gáspár, P; Palkovics, L; Gianone, L
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Transportation systems. Preprints of the 8th IFAC/IFIP/IFORS symposium. Chania, 1997. Vol. 3. (Page: 1096-1101)

Organization and technology management issues of joint European projects in a factory and in a research institute.

Authors: Kovács, GL; Nacsa, J; Lepsényi, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: HUMAN SYSTEMS MANAGEMENT (Volume no.: 16, Issue no.: 3, Page: 231-242)

Some communication problems of KB-controlled manufacturing systems.

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 10, Issue no.: 2, Page: 225-230)

Termelő és szolgáltató rendszerek számítógépes tervezése és szimulációja.

Authors: Kovács, GL; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 349-390)

Multimedia design network for manufacturing systems management.

Authors: Kovács, GL; Mezgár, I; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K)

A multimedia design network for manufacturing systems' management.

Authors: Kovács, GL; Mezgár, I; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339)

An intelligent design network for manufacturing systems' cooperation.

Authors: Kovács, GL; Mezgár, I; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: INES '97. 1997 IEEE international conference on intelligent engineering systems. Proceedings. Budapest, 1997. (Page: 511-516)

Applications of software reuse and object oriented methodologies for the modeling of manufacturing systems.

Authors: Kopácsi, S; Kovács, GL; Kmecs, I; Groumpos, M
Department: Computer Integrated Manufacturing Laboratory
Date: 1997.
Published by: Life cycle approaches to production systems. Management, control, supervision. (Page: 97-105)

1996.

Design of flexible manufacturing systems with reuse in a KB simulation environment.

Authors: Kovács, GL; Kopácsi, S; Kmecs, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Integrated design and process technology. Proceedings of the second world conference on integrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357)

Intelligent control of manufacturing systems using open communications.

Authors: Kovács, GL; Nacsa, J; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180)

Mechatronikai K+F a SZTAKI CIM Laborjában.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Mechatronika '96. 7. Mechatroninfo konferencia előadásainak anyaga. Budapest, 1996. (Page: 13-14)

Changing paradigms in manufacturing automation.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Proceedings of the 1996 IEEE international conference on robotics and automation. Minneapolis, 1996. Vol. 4. (Page: 3343-3348)

Application of knowledge based control for an integrated robotized CAD/CAM arc welding system.

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: CAD/CAM. Robotics and factories of the future. Proceedings of the 12th international conference. London, 1996. (Page: 381-386)

Creating reusable assets from simulation models of flexible manufacturing systems.

Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Robotics and manufacturing. Proceedings of the fourth IASTED international conference. Honolulu, 1996. (Page: 357-360)

AI in manufacturing: application to FMS simulation, scheduling and control.

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Computer-assisted management and control of manufacturing systems. Chapter 3. (Page: 83-115)

Organisation and technology management issues of joint European projects in a factory and in a research institute.

Authors: Kovács, GL; Nacsa, J; Lepsényi, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Quality, logistics and technology management. Proceedings of the ESPRIT-COPERNICUS symposium. Budapest, 1996. (Page: 238-252)

Some communication problems of KB controlled manufacturing systems.

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 829-834)

Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.)

Authors: Athans, M; Bokor, J; Kovács, G; Szabó, Z
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Multivariable identification of the MIT interferometer testbed using generalized orthonormal basis. (Technical report of the Systems and Controls Laboratory SCL - 002 - 1996.) (Page: 49)

Reuse in a simulation environment for flexible manufacturing systems.

Authors: Kopácsi, S; Kovács, GL; Gavalcová, D; Kmecs, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: APPLIED COMPUTING REVIEW (Volume no.: 4, Issue no.: 2, Page: 2-7)

SSQL, a set based logic query for a distributed software repository.

Authors: Succi, G; Valerio, O; Vernazza, T; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: STUDIES IN INFORMATICS AND CONTROL (Volume no.: 5, Issue no.: 1, Page: 23-40)

An integrated CAD/CAM system for robotized arc welding.

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Robotics towards 2000. 27th international symposium on industrial robots. Proceedings. Milan, 1996. (Page: 287-292)

Some experiments with a knowledge based simulator-scheduler.

Authors: Kovács, GL; Gavalcová, D
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: Proceedings of the Japan-USA symposium on flexible automation. Boston, 1996. Vol. 2. (Page: 1337-1344)

A coupled system for re-engineering of robust manufacturing system configurations.

Authors: Mezgár, I; Egresits, CS; Monostori, L; Kovács, GL
Date: 1996.
Published by: Critical technology. Proceedings of the third world congress of expert systems. Seoul, 1996. Vol. 1. (Page: 57-64)

Design of flexible manufacturing systems with reuse in a KB simulation environment.

Authors: Kovács, GL; Kopácsi, S; Kmecs, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1996.
Published by: IDPT. Proceedings of the second world conference on intergrated design and process technology. Austin, 1996. Vol. 3. (Page: 350-357)

1995.

Intelligent control of FMS - open communications

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: PUBLICATIONS OF THE UNIVERSITY OF MISKOLC. SERIES C. MECHANICAL ENGINEERING (Volume no.: 45, Issue no.: 1, Page: 93-101)

Knowledge based control and open communication of advanced manufacturing systems

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: 11th ISPA/IEE/IFAC international conference on CAD/CAM, robotics & factories of the future. Cars and FOF '95. Pereira, 1995. Vol. 1. (Page: 454-459)

Open systems in manufacturing, European and world-wide harmonized initiatives

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 47-54)

Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában

Authors: Kovács, GL; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: GEPGYARTASTECHNOLOGIA (Volume no.: 35, Issue no.: 3-4, Page: 117-120)

Computer aided design/computer aided manufacturing

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Seminario de sistemas avanzados de manufactura. Seminario de robotica. Pereira, 1995 (Page: 303-355)

Open systems in manufacturing

Authors: Haidegger, G; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 252-259)

Changing paradigms in manufacturing automation. Survey paper

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 1. (Page: 13-18)

Knowledge based control of manufacturing systems using open communication

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Large scale systems: theory and applications. IFAC/IFORS/IMACS symposium. Preprints. London, 1995. Vol. 2. (Page: 693-697)

Towards intelligent and open control of manufacturing systems

Authors: Kovács, GL; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 1. (Page: 165-169)

A system to assist robotized welding for SME's

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: 3rd IFAC/IFIP/IFORS workshop on intelligent manufacturing systems. IMS '95. Preprints. Bucharest, 1995. Vol. 2. (Page: 381-386)

CAD/CAM integration of an arc welding cell for one-of-a-kind production

Authors: Weck, M; Peper, S; Kovács, GL; Nacsa, J; Szilvásy, A; Vonderviszt, L
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 337-346)

The relation between u and l1 robust analysis results

Authors: Kovács, GZ; Varga, EI; Hangos, KM
Date: 1995.
Published by: Automatizálás '95 konferencia nemzetközi részvétellel. Automation '95 with international participation. Proceedings. Budapest, 1995. Vol. 1. (Page: 241-250)

Some problems of knowledge based control of manufacturing systems using open communication

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Applications of artificial intelligence in engieneering X. AIENG '95. Tenth international conference. Udine, 1995 (Page: 349-356)

A PC-based OSI system to assist robotized welding

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Opening productive partnerships. Concentrated efforts for Europe. Proceedings of the conference in integration in manufacturing. Vienna, 1995. (Advances in design and manufacturing 6.) (Page: 159-165)

Problems of products' and production systems' quality

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Zbornik z 15. konferencie. QUALITY '95. Kvalita práce, produkcie a zivota. Piestany, 1995 (Page: 127-132)

A PC-based offline programming system to assist robotized welding

Authors: Nacsa, J; Kovács, GL; Weck, M; Peper, S; Szilvásy, A; Vonderviszt, L
Department: Computer Integrated Manufacturing Laboratory
Date: 1995.
Published by: Recent advances in mechatronics. ICRAM '95. Proceedings of the international conference. Istanbul, 1995. Vol. 1. (Page: 533-538)

Robust analysis of distillation column dynamics

Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KM
Date: 1995.
Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338)

1994.

A hybrid simulation-scheduler-quality control system for FMS

Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Nacsa, J; Groumpos, P
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 655-662)

A hybrid simulation-scheduler-quality control system to assist the design of flexible manufacturing systems

Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Applications and impacts. Information processing'94. Proceedings of the IFIP 13th world computer congress. Hamburg, 1994. Vol. 2. (IFIP transactions A-52.) (Page: 92-95)

A knowledge based and a hybrid simulation-scheduling system

Authors: Kovács, GL; Mezgár, I; Nacsa, J; Kopácsi, S; Gavalcová, D
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: 1994 Japan-USA symposium on flexible automation. Proceedings. Kobe, 1994. Vol. 2. (Page: 783-790)

A hybrid simulation-scheduler-quality control system

Authors: Kovács, GL; Mezgár, I; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: The 10th ISPE/IFAC international conference on CAD/CAM, robotics and factories of the future. CARs and FOF '94. Information technology for modern manufacturing. Conference proceedings. Ottawa, 1994 (Page: 584-589)

Concurrent engineering approach to support CIM reference model-based FMS design

Authors: Kovács, G; Mezgár, I; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 1, Page: 17-27)

Application of artificial intelligence to problems in advanced manufacturing systems

Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 7, Issue no.: 3, Page: 153-160)

Application of expert systems to solve some problems of advanced manufacturing systems

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Moving toward expert systems globally in the 21st century. Second world congress on expert systems. Lisbon/Estoril, 1994 (Page: 1259-1264)

A knowledge based and a hybrid system to evaluate flexible manufacturing systems

Authors: Kovács, GL; Nacsa, J; Gavalcová, D
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: 1994 IEEE international conference on robotics and automation. Proceedings. San Diego, 1994. Vol. 4. (Page: 3570-3575)

Possibilities of quality asssurance in a virtual manufacturing environment

Authors: Mezgár, I; Gavalcová, D; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 61-66)

Interfacing G2 expert system shell with MMS protocol

Authors: Kovács, GL; Nagy, G; Gavalcova, D; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Gensym Users Society worldwide meeting. Washington, 1994 (Page: 1-13)

A simulation-scheduling system using hybrid technology

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Proceedings of the fourth international conference on computer integrated manufacturing and automation technology. Troy, 1994 (Page: 351-356)

A knowledge based hybrid system to evaluate flexible manufacturing systems

Authors: Kopácsi, S; Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Proceedings of 1st international symposium on advances in intelligent computer integrated manufacturing systems. Seoul, 1994 (Page: 299-302)

Cross-National comparisons of product development in manufacturing

Authors: Ettlie, JE; Dreher, CL; Kovács, GL; Trygg, L
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: Advances in global high-technology management. International management of high technology. Vol. 4. Part B (Page: 91-109)

Communication problems of expert systems in manufacturing environment

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: AIRTC'94. Symposium on artificial intelligence in real time control. Preprints. Valencia, 1994 (Page: 377-381)

Steps towards real-time control using knowledge based simulation of flexible manufacturing systems

Authors: Nacsa, J; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: 2nd IFAC workshop on computer software structures integrating AI/KBS systems in process control. Preprints. Lund, 1994 (Page: 88-91)

Some aspects of knowledge based simulation and control of flexible manufacturing systems

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1994.
Published by: The first world-congress on intelligent manufacturing processes and systems. Proceedings. Mayagüez-San Juan, 1995. Vol. l. (Page: 63-71)

1993.

CIM reference model based FMS design with concurrent engineering approach

Authors: Kovács, G; Mezgár, I; Vészi, A
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Preprints of the 12th IFAC World Congress, 1993. Vol. 6. (Page: 325-330)

Combining AI means and traditional programming to solve some problems of FMS simulation, scheduling and control

Authors: Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Ikinci Türk yapay zeka ve yapay sinir aglari sempozyumu. Istanbul, 1993. /Second Turkish conference on artificial intelligence and artificial neural networks/ (Page: 319-324)

Concurrent engineering approach and application of AI to manufacturing

Authors: Kovács, GL; Mezgár, I; Vishwanadham, N
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Robotics and Automation, 1993. Proceedings of the IEEE International Conference. Tutorial T5 (Page: 255-255)

Application of expert and traditional program systems for FMS simulation, scheduling and control

Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Proceedings of 9th International Conference on Control Systems and Computer Science, CSCS 9, Bucharest, 1993. Vol. 1. (Page: 346-362)

A knowledge based simulation system for flexible manufacturing

Authors: Kopácsi, S; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Robotics and Automation, 1993. Vol. 1. Proceedings of the IEEE International Conference, Atlanta, 1993 (Page: 858-863)

A CS-PROLOG based expert system for manufacturing cell design, simulation and animation

Authors: Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Information Control Problems in Manufacturing Technology 1992. Selected Papers from the 7th IFAC/IFIP/IFORS/IMACS/ISPE Symposium, Toronto (IFAC Symposia Series, 9304) (Page: 105-109)

Knowledge based hybrid simulation of FMS

Authors: Kopácsi, S; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Proceedings of IMACS/IFAC second international conference on mathematical and intelligent models in system simulation, MIM-SS'93 Brussels, 1993 (Page: 89-92)

Integrated application of real-time expert systems for FMS evaluation and control

Authors: Kovács, GL; Mezgár, I; Kopácsi, S; Gavalcová, D; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Applications of artificial intelligence in engineering VIII. AIENG/93. Toulouse, 1993. Vol. 2. (Page: 835-847)

KB simulation and CE approach to assist in quality assurance of products and production systems

Authors: Kovács, G; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Computer integrated manufacturing. Proceedings of the 2nd international conference. Singapore, 1993. Vol. 2. (Page: 161-169)

Hybrid systems for CIM components' configuration/reconfiguration

Authors: Mezgár, I; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 61-72)

Cross-national comparisons of product development in manufacturing

Authors: Ettlie, JE; Dreher, G; Kovács, GL; Trygg, L
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: JOURNAL OF HIGH TECHNOLOGY MANAGEMENT RESEARCH (Volume no.: 4, Issue no.: 2, Page: 139-155)

Hybrid systems for CIM components' configuration/reconfiguration

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Knowledge Based Hybrid Systems, Proceedings of the IFIP TC5/WG5.3/IFAC International Working Conference on Knowledge Based Hybrid Systems in Engineering and Manufacturing, KNOWHSEM '93, Budapest, Hungary, 20-22 April, 1993 (IFIP transactions B-11) (Page: 77-88)

CIM reference model based FMS design with concurrent engineering approach

Authors: Mezgár, I; Kovács, G; Vészi, A
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Industrial engineering and production management (IEPM'93) Proceedings of the International conference, Mons, 1993. Vol. 2. (Page: 635-644)

CE approach to quality assurance of products and production systems

Authors: Mezgár, I; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: Advances in production management systems. Proceedings of the IFIP TC5/WG5.7 fifth international conference on APMS'93. Athens, 1993 (IFIP transactions B-13) (Page: 259-266)

Plans of the MAP training centre in Budapest

Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91)

Tudásalapú gyártórendszer-szimuláció és -termelésütemezés

Authors: Kovács, GY; Mezgár, I; Kopácsi, S; Gavalcová, D
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: MicroCAD-SYSTEM'93. Nemzetközi számítástechnikai találkozó. Miskolc, 1993. I. szekció (Page: 29-36)

Parallel quality assurance of products and production systems using the CE approach

Authors: Mezgár, I; Kovács, GL
Department: Computer Integrated Manufacturing Laboratory
Date: 1993.
Published by: CE94. Concurrent engineering: research and applications. Conference proceedings. Pittsburgh, 1994 (Page: 451-459)

1992.

One-of-a-kind production - a concurrent engineering approach

Authors: Kovács, G; Mezgár, I; Szelke, E; Girnt, M
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: One-of-a-kind production. New approaches. Proceedings of the IFIP WG 5.7 working conference. Bremen, 1991 (Page: 143-156)

Pilot plants to assist FMS/CIM evaluation, design and industrial applications

Authors: Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: COMPUTER INTEGRATED MANUFACTURING SYSTEMS (Volume no.: 5, Issue no.: 1, Page: 54-60)

A Prolog based manufacturing cell design system

Authors: Kovács, G; Mezgár, I; Kopácsi, S
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 90-97)

First experiences with a MAP-networked CIM pilot plant

Authors: Kovács, G; Haidegger, G; Nacsa, J
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125)

Concurrent product/production system design and Petri Nets in automated manufacturing systems

Authors: Kovács, G; Mezgár, I; Silva, M; Di Cesare, F; Desrochers, AA
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Tutorial notes (Page: 1-200)

Application of concurrent engineering in design for one-of-a-kind production

Authors: Kovács, G; Mezgár, I; Szelke, E
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Robotics and Automation. Proceedings of the 1992 IEEE International Conference Nice, 1992. Vol. 2 (Page: 956-961)

Concurrent engineering: a way to design intelligent manufacturing systems

Authors: Kovács, G; Mezgár, I
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Flexible Automation 1992. Proceedings of the Japan-USA symposium, San Francisco, 1992. Vol. 1. (Page: 461-466)

Application of cooperative agents (co-gents) for simulation of flexible manufacturing systems

Authors: Létray, Z; Kopácsi, S; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Open distributed processing. Proceedings of the IFIP TC6/WG6.4 International Workshop on Open Distributed Processing, Berlin, Germany, 8-11 October 1991. (IFIP Transactions C-1) (Page: 415-420)

Cooperative hybrid expert systems for concurrent design of FMS

Authors: Molina, A; Mezgár, I; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Intelligent manufacturing systems. Preprints of the IFAC workshop. Dearborn, 1992 (Page: 51-56)

OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban

Authors: Nacsa, J; Haidegger, G; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166)

Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria

Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408)

Design of a machine tool monitoring system

Authors: Ruiz, GH; Mazzotti, CG; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: IFAC workshop on automatic control for quality and productivity. ACQP '92. Istambul, 1992. Preprints. Vol. 1. (Page: 61-67)

MAP Training Center as a test-bed for OSI products in manufacturing

Authors: Nacsa, J; Haidegger, G; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371)

Object knowledge representation models for concurrent design for FMS

Authors: Molina, A; Mezgár, I; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Human aspects in computer integrated manufacturing. Proceedings of the IFIPTC5/WG5.3 eight international PROLAMAT conference. Tokyo, 1992 (Page: 779-788)

FMS design based on concurrent engineering: a blackboard architecture approach

Authors: Molina, A; Mezgár, I; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 353-362)

Konkurrens RGYR tervezés blackboard arhitektúrájú keretrendszerrel

Authors: Molina, A; Mezgár, I; Kovács, GY
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 42-46)

Concurrent engineering approach to FMS design using a blackboard architecture

Authors: Molina, A; Mezgár, I; Kovács, G
Department: Computer Integrated Manufacturing Laboratory
Date: 1992.
Published by: IFAC-INCOM '92. Toronto, 1992. Preprints. Vol. 2. (Page: 457-462)