- Katalin Hangos, Prof, research advisor

CURRICULUM VITAE OF KATALIN MARIA HANGOS
Content and impact of the major scientific or scholarly contributions A synergetic grey-box approach has been followed to solve research problems in control and diagnosis of nonlinear process systems integrating thermodynamics, mechanics and engineering sciences with systems and control theory. The basis of the approach is process modelling and model analysis using first engineering principles. Within this context the major scholarly contributions are as follows. 1. Computer Aided Process Modelling Formal methods of computer science and artificial intelligence are applied to construct, verify, analyze and simplify process models in a rigorous and automated way. In particular, a formal method for defining syntax and semantics of process models has been proposed. The effect of algebraic, model building and model simplification transformations has been analyzed on the computational and dynamic properties of process models. The approaches and methods of model reduction have also been investigated and applied to define the notion of minimal process models and analyze their properties. The integration frameworks of multiscale process models have been classified, and the newly introduced model metrics have been used to evaluate the computational properties of multi-scale models. Intelligent diagnostic systems that utilize the structure of multi-scale process models have also been developed. 2. Analysis of process models for control The laws of thermodynamics have been used for analyzing structural stability of process systems. An entropy-based storage function has been found for nonlinear process systems, which enables to analyze their passivity. A Hamiltonian description of process models has also been developed which has been used for constructing stabilizing and loop-shaping controllers for nonlinear process systems. Quasi-polynomial system models being generalized Lotka-Volterra systems have been used for a wide class of nonlinear process systems for stability analysis and controller design purposes. It was shown that a Lotka-Volterra system is globally stable with a formerly known entropy-like Lyapunov function candidate if and only if there exists a local dissipative-Hamiltonian description of the system in the neighbourhood of the equilibrium point with a quadratic Hamiltonian function. Furthermore, a method for the estimation of guaranteed quadratic stability neighborhood has been developed using linear matrix inequalities. Globally stabilizing feedback controller design was shown to be solved by using bilinear matrix inequalities. 3. Combinatorial methods for integrated design of processes and their control system Constraint type qualitative models have been used for model-based generation of operating procedures for a distillation column. Coloured Petri nets (CPNs) have been proposed for model-based verification of such operating procedures. Furthermore, an intelligent event-driven diagnostic system has been developed which is based on the CPN model of the process system and able to refine its model using the observed events.
Publications[ order by time]
[ order by categories ]
[ order by authors]
- Towards optimal quantum state estimation of a qubit by using indirect measurements.
Authors: Ruppert, László; Magyar, Attila; Hangos, Katalin; Petz, DénesDate: 2008.Published by: Research Report of the Systems and Control Laboratory SCL-002/2008. (Page: 24)
- Parameter estimation of a simple hierarchial arm model.
Authors: Fazekas, Csaba; Kozmann, Gy.; Magos, T.; Hangos, KatalinDate: 2007.Published by: Technical report of the Systems and Control Laboratory SCL-002/2007. (Length: 31 page)
- Nonlinear lumping of cascade activation reactions.
Authors: Csercsik, Dávid; Hangos, KatalinDate: 2007.Published by: Research Report of the Systems and Control Laboratory SCL-003/2007. (Length: 39 page)
- Improved estimation method of region of stability for nonlinear autonomous systems
Authors: Rozgonyi, Szabolcs; Hangos, Katalin; Szederkényi, GáborDate: 2006.Published by: Technical report of the Systems and Control Laboratory SCL-002/2006. (Length: 15 page)Download article: [pdf]
- State estimation of N-level quantum systems.
Authors: Petz, Dénes; Hangos, Katalin; Magyar, Attila; Ruppert, LászlóDate: 2006.Published by: Technical report of the Systems and Control Laboratory SCL-007/2006. (Length: 32 page)Download article: [pdf]
Book- Nonlinear zero dynamics analysis and control of a low power gas turbine. (Research report SCL-003/2005.)
- Diagnostic goal-driven reduction of multiscale process models. (Research report SCL-001/2005.)
- An algorithm for determining a class of invariants in quasi-polynomial systems. (Research report SCL-002/2005.)
- Coloured Petri Net Model of a Simple Runway. (Research report SCL-001/2004)
Authors: Kovács, Á; Németh, E; Hangos, KMDate: 2004.Published by: Coloured Petri Net Model of a Simple Runway. (Research report SCL-001/2004) (Page: 27)
- Hierarchical modelling in biology: A systematic build-up of a limb model. (Technical report SCL-003/2004)
Authors: Fazekas, CS; Kozmann, GY; Hangos, KMDate: 2004.Published by: Hierarchical modelling in biology: A systematic build-up of a limb model. (Technical report SCL-003/2004) (Page: 50)
- Multi-scale process model description by generalized hierarchical CPN models. (Research report SCL-002/2004)
Authors: Németh, E; Hangos, KMDate: 2004.Published by: Multi-scale process model description by generalized hierarchical CPN models. (Research report SCL-002/2004) (Page: 19)
- Zero dynamics of SISO quasi-polynomial systems. (Technical report SCL-005/2004)
Authors: Schné, T; Hangos, KMDate: 2004.Published by: Zero dynamics of SISO quasi-polynomial systems. (Technical report SCL-005/2004) (Page: 17)
- The structure and analysis of QP-DAE system models. (Research report SCL-004/2004)
Authors: Pongrácz, B; Ingram, G; Hangos, KMDate: 2004.Published by: The structure and analysis of QP-DAE system models. (Research report SCL-004/2004) (Page: 37)
- Analysis and Control of Nonlinear Process Systems (Advanced Textbooks in Control and Signal Processing)
Authors: Hangos, KM; Bokor, J; Szederkényi, GDate: 2004.Published by: Analysis and Control of Nonlinear Process Systems (Advanced Textbooks in Control and Signal Processing) (Page: 308)
- Hierarchical CPN model-based diagnosis using HAZOP knowledge. (Research report SCL-009/2003)
Authors: Németh, E; Lakner, R; Hangos, KM; Cameron, ITDate: 2003.Published by: Hierarchical CPN model-based diagnosis using HAZOP knowledge. (Research report SCL-009/2003) (Page: 24)
- On some properties of quasi-polynomial ordinary differential equations and differential algebraic (QP-DAE) equations (Research report SCL-010/2003)
Authors: Magyar, A; Ingram, G; Pongrácz, B; Szederkényi, G; Hangos, KMDate: 2003.Published by: On some properties of quasi-polynomial ordinary differential equations and differential algebraic (QP-DAE) equations (Research report SCL-010/2003) (Page: 43)
- Nonlinear control of an electro-pneumatic protection valve for circuit pressure limiting. (Research report SCL-005/2003)
Authors: Németh, H; Hangos, KMDate: 2003.Published by: Nonlinear control of an electro-pneumatic protection valve for circuit pressure limiting. (Research report SCL-005/2003) (Page: 22)
- System identification of an electro-pneumatic protection valve. (Research report SCL-001/2003)
Authors: Németh, H; Palkovics, L; Hangos, KMDate: 2003.Published by: System identification of an electro-pneumatic protection valve. (Research report SCL-001/2003) (Page: 29)
- Computer controlled systems.
- Model simplification of a single protection valve: a systematic approach. (Research report of the Systems and Controls Laboratory SCL-004/2002.)
Authors: Németh, H; Palkovics, L; Hangos, KMDate: 2002.Published by: Model simplification of a single protection valve: a systematic approach. (Research report of the Systems and Controls Laboratory SCL-004/2002.) (Page: 21)
- Modeling and nonlinear analysis of a low-power gas turbine. (Techical report of the Systems and Control Laboratory, SCL-1/2001.)
Authors: Ailer, P; Szederkényi, G; Hangos, KMDate: 2001.Published by: Modeling and nonlinear analysis of a low-power gas turbine. (Techical report of the Systems and Control Laboratory, SCL-1/2001.) (Page: 25)
- Some complexity problems on single input double output controllers. (BRICS report series of Department of Computer Science University of Aarhus, RS-01-18.)
Authors: Hangos, KM; Tuza, ZS; Yeo, ADate: 2001.Published by: Some complexity problems on single input double output controllers. (BRICS report series of Department of Computer Science University of Aarhus, RS-01-18.) (Page: 27)
- Intelligent control systems. An introduction with examples. (Applied optimization 60.)
Authors: Hangos, KM; Lakner, R; Gerzson, MDate: 2001.Published by: Intelligent control systems. An introduction with examples. (Applied optimization 60.) (Page: 301)
- Process modelling and model analysis. I(Process systems engineering 4.)
Authors: Hangos, KM; Cameron, ITDate: 2001.Published by: Process modelling and model analysis. I(Process systems engineering 4.) (Page: 543)
- Grey-box characterization of nonlinear process systems. (Research report of the Systems and Control Laboratory, SCL-1/1999.)
Authors: Hangos, KM; Szederkényi, G; Bokor, JDate: 1999.Published by: Grey-box characterization of nonlinear process systems. (Research report of the Systems and Control Laboratory, SCL-1/1999.) (Page: 17)
- Dinamikus rendszerek paramétereinek becslése.
- Experimental investigation of hierarchical internet object cache characteristics.
Authors: Kolics, B; Hangos, KM; Tétényi, IDate: 1998.Published by: Experimental investigation of hierarchical internet object cache characteristics. (Page: 13)
- Invariant inhesitance in structured operating procedures described by Petri nets. (Technical report of the Systems and Controls Laboratory, SCL-001-1997.)
Authors: Kránicz, B; Gerzson, M; Hangos, KMDate: 1997.Published by: Invariant inhesitance in structured operating procedures described by Petri nets. (Technical report of the Systems and Controls Laboratory, SCL-001-1997.) (Page: 21)
- DYEDIT - qualitative model editor. Task specification. Vers. 2.0. (Research report of the Systems and Control Laboratory SCL-003-1992)
Authors: Csáki, ZS; Hangos, KM; Varga, EIDate: 1992.Published by: DYEDIT - qualitative model editor. Task specification. Vers. 2.0. (Research report of the Systems and Control Laboratory SCL-003-1992) (Page: 19)
- Kémiai rendszerek dinamikája (Research report of the Systems and Control Laboratory SCL-002-1992)
Authors: Hangos, KMDate: 1992.Published by: Kémiai rendszerek dinamikája (Research report of the Systems and Control Laboratory SCL-002-1992) (Page: 53)
Book chapter- Computing realizations of reaction kinetic networks with given properties.
- Coloured Petri net diagnosers for lumped process systems.
Authors: Tóth, Attila; Németh, Erzsébet; Hangos, KatalinDate: 2010.Published by: KES 2010. 14th international conference on knowledge-based and intelligent information and engineering systems. Cardiff, 2010. Part II. (Lecture notes in artificial ingelligence 6277.) (Issue no.: I, Page: 389--398.)
- Detectability and diagnosability of faults in lumped process systems.
Authors: Hangos, Katalin M.; Németh, Erzsébet; Lakner, Rozália; Tóth, AttilaEditor: Pierucci, S.; Buzzi Ferraris, G.Date: 2010.Published by: 20th European symposium on computer aided process engineering - ESCAPE20. Ischia, Naples, 2010. (Computer-aided chemical engineering 28.) (Page: 1447-1452.)
- Proceedings of the Workshop on Systems and Control Theory in honor of József Bokor on his 60th birthday
- Quantum state tomography with finite sample size.
Authors: Petz, Dénes; Hangos, Katalin; Ruppert, LászlóEditor: Accardi, L; Freudenberg, W; Ohya, MDate: 2008.Published by: Quantum bio-informatics from quantum informatics to bio-informatics. (Page: 247-257.)
- Process control based on physically inherent passivity.
Authors: Hangos, Katalin; Szederkényi, GáborDate: 2007.Published by: Process control: the passive systems approach. (Advances in industrial control.) (Page: 193-224.)
- Model tuning, discrimination, and verification
Authors: Hangos, Katalin; Lakner, RozáliaEditor: Puigjaner, L; Heyen, GDate: 2006.Published by: Computer aided process and product engineering. Vol. 1. (Page: 171-187)
- Diagnostic goal-driven reduction of multiscale process models
Authors: Németh, Erzsébet; Lakner, Rozália; Hangos, KatalinEditor: Gorban, AN; Kazantzis, NK; Kevrekidis, IG; Öttinger, HC; Theodoropoulos, CDate: 2006.Published by: Model reduction and coarse-graining approaches for multiscale phenomena (Page: 465-487)
- Multiscale process modeling
Authors: Cameron, IT; Ingram, GD; Hangos, KatalinEditor: Puigjaner, L; Heyen, GDate: 2006.Published by: Computer aided process and product engineering. Vol. 1. (Page: 198-221)
- A technológiai menedzsment modern módszerei.
Authors: Biró, M; Hangos, KM; Krámli, ADate: 1997.Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 102-113)
- Use of qualitative models for the choice of design parameters of MBPC
Authors: Hangos, K; Csáki, ZS; Varga, EIDate: 1994.Published by: Advances in model based predictive control (Page: 344-357)
Conference issue- Analysis and supervisory control of a pressurizer using coloured Petri nets.
Authors: Rudán, J; Hangos, Katalin; Szederkényi, GáborDate: 2011. 11.Published by: ACD 2011. 9th European workshop on advanced control and diagnosis. Budapest, 2011. (Length: 1-8. page)
- Knowledge-based diagnosis of process systems using procedure HAZID information.
Authors: Werner-Strak, Á.; Németh, Erzsébet; Hangos, KatalinDate: 2011. 09. 12.Published by: KES 011. Knowledge-based and intelligent information and engineering systems. 15th international conference. Kaiserslautern, 2011. Part 3. (Lecture notes in computer science 6883.) (Page: 385-394.)
- Experiment design for Pauli channel estimation.
Authors: Balló, G.; Hangos, KatalinDate: 2011. 08. 28.Published by: Preprints of the 18th IFAC World Congress. Milano, 2011. (Page: 4344-4349.)
- Generating cause-implication graphs for process systems via blended hazard identification methods.
Authors: Németh, Erzsébet; Seligmann, B.J.; Hockings , K.; Oakley , J.; O'Brien , C.; Hangos, Katalin; Cameron, I.T.Editor: Pistikopoulos, E.N.; Georgiadis, M.C.; Kokossin, A.C.Date: 2011. 05. 29.Published by: ESCAPE 21. 21st European symposium on computer-aided process engineering. Chalkidiki, 2011. (Computer aided chemical engineering 29.) (Page: 1070-1074.)
- Model based process diagnosis using graph methods.
Authors: Gerzson, M.; Leitold, A.; Hangos, KatalinDate: 2011. 05. 24.Published by: Factory automation 2011 conference. Győr, 2011. (Page: 62-70.)
- Low voltage grid optimization with power injection of renewable sources and EV batteries.
Authors: Görbe, P.; Magyar, A.; Hangos, KatalinDate: 2011. 05. 08.Published by: PRES 2011. 14th international conference on process integration, modelling and optimisation for energy saving and pollution reduction. Florence, 2011. (Length: 1-6. page)
- Discrete event model structure identification using process mining.
Authors: Werner-Stark, A.; Gerzson, M.; Hangos, KatalinDate: 2011.Published by: MIC 2011. Proceedings of the IASTED international conference modelling, identification, and control. Innsburck, 2011. (Page: 228-233.)
- Applicability of extended genetic algorithms for process mining
Authors: Werner-Stark, A; Dulai , T; Hangos, K.M.Date: 2011.Published by: Matematikát, fizikát és informatikát oktatók XXXV. konferenciája - MAFIOK 2011 (Length: 1-10 page)
- State estimation methods using indirect measurements.
Authors: Hangos, Katalin; Ruppert, L.Editor: Rebolledo, Rolando; Orszag, MiguelDate: 2011.Published by: Quantum probability and related topics. Proceedings of the 30th conference. Santiago, 2009. (QP-PQ quantum probability and white noise analysis 27.) (Page: 163-180.)
- Identifiability of a Hodgkin-Huxley type ion channel under voltage step measurement conditions.
- Parameter estimation of quantum processes using convex optimization.
Authors: Balló, Gábor; Magyar, Attila; Hangos, Katalin M. Editor: Edelmayer, AndrásDate: 2010.Published by: 19th International symposium on mathematical theory of networks and systems. MTNS 2010. Budapest, 2010. (Page: 2043-2050.)
- Martingale approach in quantum state estimation using indirect measurements.
Authors: Ruppert, László; Hangos, Katalin M.Editor: Edelmayer, AndrásDate: 2010.Published by: 19th International symposium on mathematical theory of networks and systems. MTNS 2010. Budapest, 2010. (Page: 2049-2054.)
- Parameter sensitivity analysis of an industrial synchronous generator.
Authors: Fodor, A.; Magyar, A.; Hangos, Katalin M. Date: 2010.Published by: 11th international PhD workshop on systems and control a young generation viewpoint. Proceedings. Veszprém, 2010. (Page: 2-9.)
- Dynamic Modeling and Model Analysis of a Large Industrial Synchronous Generator
Authors: Fodor, Attila; Magyar, Attila; Hangos, Katalin M. Date: 2010.Published by: IEEE international conference on applied electronics. AE-2010. Pilsen, 2010. (Length: 1-6. page)
- A structured, blended hazard identification framework of advanced process diagnosis.
Authors: Seligmann, B.; Németh , E.; Hockings, K.; McDonald, I.; Lee, J.; O'Brien, C.; Hangos, Katalin M.; Cameron, I. T.Editor: Sutter, G.; De Rademaeker, E.Date: 2010.Published by: Loss prevention and safety promotion in the process industries. Proceedings of the 13th international symposium. Vol. 1. Brugge, 2010. (Page: 193-200.)
- THD reduction with grid synchronized inverter's power injection of renewable sources.
Authors: Görbe, Péter; Magyar, Attila; Hangos, Katalin M. Date: 2010.Published by: SPEEDAM 2010. International symposium on power electronics, electrical drives, automation and motion. Pisa, 2010. (Page: 1381-1386.)
- Power conditioning with electric car battery charging from renewable sources.
Authors: Görbe, Péter; Magyar, Attila; Hangos, KatalinDate: 2010.Published by: 11th international PhD workshop on systems and control a young generation viewpoint. Proceedings. Veszprém, 2010. (Page: 98-105.)
- Modeling and identification of the pressurizer of a VVER nuclear reactor for controller design purposes.
Authors: Gábor, Attila; Hangos, Katalin M. ; Szederkényi, GáborDate: 2010.Published by: 11th international PhD workshop on systems and control a young generation viewpoint. Proceedings. Veszprém, 2010. (Page: 11-19.)
- Modeling and identification of a nuclear reactor with temperature effects and xenon poisoning.
- Dynamic modeling and analysis of a synchronous generator in a nuclear power plant.
- Line conditioning with grid synchronized inverter's power injection of renewable sources in nonlinear distorted mains.
- Model synthesis and identification of a Hodgkin-Huxley-type GnRH neuron model.
- Modeling and identification of a nuclear reactor with temperature dependent reactivity.
- Dynamical modeling and identification of a GnRH neuron.
- Fault diagnosis based on hazard identification results.
Authors: Németh, Erzsébet; Lakner, Rozália; Cameron, Ian T.; Hangos, KatalinDate: 2009. 06. 30.Published by: SAFEPROCESS 2009. 7th IFAC international symposium on fault detection, supervision and safety of technical processes. Barcelona, 2009. (Page: 1515-1520.)
- Special positive systems: the QP and the reaction kinetic system class.
- A functional systems approach to the development of improved hazard identification for advanced diagnostic systems.
Authors: Cameron, I. T.; Seligmann, B.; Hangos, Katalin; Németh, Erzsébet; Lakner, R.Editor: Braunschweig, B.; Joulia, X.Date: 2008.Published by: ESCAPE 18. 18th European symposium on computer aided process engineering. Lyon, 2008. (Page: 1-6.)
- A procedure ontology for advanced diagnosis of process systems.
Authors: Hangos, Katalin; Németh, Erzsébet; Lakner, RozáliaEditor: Lovrek, I; Howlett , RJ; Jain, LCDate: 2008.Published by: KES 2008. 12th international conference on knowledge-based and intelligent information and engineering systems. Zagreb, 2008. Part 1. (Lecture notes in artificial ingelligence 5177.) (Page: 501-508.)
- Analysis of the networked implementation of the primary circuit pressurizer controller at a nuclear power plant.
- Parameter estimation of Hodgkin-Huxley model of GnRH neurons.
- Identification of the primary circuit dynamics in a pressurized water nuclear power plant.
- Determining flat outputs of MIMO nolinear systems using directed graphs.
- Compromising non-demolition and information gaining for qubit state estimation.
Authors: Ruppert, László; Magyar, Attila; Hangos, KatalinEditor: Garcia, J.C.; Quezada, R.; Sontz, S.B.Date: 2008.Published by: Quantum probability and related topics. Proceedings of the 28th conference. CIMAT-Guanajuato, 2007. (QP-PQ. Quantum probability and white noise analysis 23.) (Page: 212-224.)
- Estimating the region of stability for a hybrid model.
Authors: Rozgonyi, Sz.; Hangos, KatalinEditor: Mikles, J.; Fikar, M.; Kvasnica, M.Date: 2007.Published by: Proceedings of the 16th international conference on process control. Strbské Pleso, 2007. (Page: 012-1-012-8.)
- The P3 formalism: a basics for improved diagnosis in complex systems.
Authors: Cameron, I.T.; Seligmann, B.; Hangos, Katalin; Lakner, R.; Németh, ErzsébetDate: 2007.Published by: CHEMECA 2007. Conference proceedings. Melbourne, 2007. (Page: 1077-1088.)
- Comparison of some methods of quantum state estimation.
Authors: Baier, T.H.; Petz, Dénes; Hangos, Katalin; Magyar, AttilaDate: 2007.Published by: Quantum probability and infinite dimensional analysis. Proceedings of the 26th conference. Levico, 2005. (Page: 64-78.)
- Control of mass action law based reaction networks.
Authors: Magyar, Attila; Szederkényi, Gábor; Hangos, KatalinEditor: Mikles, J.; Fikar, M.; Kvasnica, M.Date: 2007.Published by: Proceedings of the 16th international conference on process control. Strbské Pleso, 2007. (Page: 120-1-120-7.)
- Modeling and simulation of the primary circuit of the Paks nuclear power plant for control and diagnosis.
- Dynamics of quantum mechanical systems under weak measurement.
Authors: Magyar, Attila; Hangos, KatalinDate: 2007.Published by: Proceedings of the 8th international PhD workshop on systems and control a young generation viewpoint. Balatonfüred, 2007. (Page: 49-54.)
- Model identification of the primary circuit at the Paks nuclear power plant.
Authors: Fazekas, Csaba; Szederkényi, Gábor; Hangos, KatalinEditor: Bruzzole, L.Date: 2007.Published by: Proceedings of the 26th IASTED international conference on modelling, identification and control. Innsbruck, 2007. (Page: 464-469.)
- A non-invasive parameter estimation method based on a planar multi-scale arm model.
Authors: Fazekas, Csaba; Kozmann, Gy.; Magos, T.; Hangos, KatalinDate: 2007.Published by: Proceedings of the 8th international PhD workshop on systems and control a young generation viewpoint. Balatonfüred, 2007. (Page: 106-111.)
- Cascade stabilization and reference tracking of a simple nonlinear limb model.
- Simulator for multi-scale musculoskeletal models with reflex circuits.
- Dynamic analysis and control of biochemical reaction networks
Authors: Otero-Muras, I; Szederkényi, Gábor; Hangos, Katalin; Alonso, AAEditor: Troch, IDate: 2006.Published by: MATHMOD 2006. 5th Vienna symposium on mathematical modelling. Proceedings. Vienna, 2006. Vol. 2. (Volume no.: 2, Page: 4-1-4-10)
- Modeling and model identification of a pressurizer at the Paks Nuclear Power Plant
- Process control based on physical insight: passivity and Hamiltonian system models
- Nonlinear control design for a mechatronic protection valve
Authors: Palkovics, László; Németh, Huba; Hangos, KatalinEditor: Bokor, József; Hangos, KatalinDate: 2006.Published by: Proceedings of the workshop on system identification and control systems in honor of László Keviczky on his 60th birthday. Budapest, 2005. (Page: 63-80)
- Quasi-polynomial and Lotka-Volterra representation in nonlinear systems and control theory
- Improved estimation method of region of stability for nonlinear autonomous systems
Authors: Rozgonyi, Szabolcs; Hangos, KatalinEditor: Smídl, VDate: 2006.Published by: Proceedings of the 7th international PhD workshop: young generation viewpoint. Hrubá Skála, 2006. (Page: 234-241)
- Bayesian qubit state estimation
Authors: Magyar, Attila; Petz, Dénes; Hangos, KatalinDate: 2006.Published by: SYSID-2006. Preprints of the 14th IFAC symposium on system identification. Newcastle, 2006. (Page: 949-954)
- Agent-based diagnosis for granulation processes
Authors: Lakner, Rozália; Németh, Erzsébet; Hangos, Katalin; Cameron, ITEditor: Marquardt, W; Pantelides, CDate: 2006.Published by: ESCAPE-16 - PSE 2006. 16th European symposium on computer aided process engineering and 9th international symposium on process systems engineering. Garmisch-Partenkirchen, 2006. (Page: 1443-1448)
- Estimating the stability region of a controlled pressurized water reactor
- Dynamic analysis and control of chemical and biochemical reaction networks
Authors: Otero-Muras, I; Szederkényi, Gábor; Alonso, AA; Hangos, KatalinDate: 2006.Published by: ADCHEM 2006. International symposium on advanced control of chemical processes. Preprints.Gramado, 2006. Vol. 1. (Page: 165-170)
- Linear and nonlinear control of muscoskeletal systems
- Bayesian qubit tomography
Authors: Magyar, A; Hangos, KMDate: 2005.Published by: Proceedings of the 6th international PhD workshop on systems and control. Izola, 2005. (Page: 1-6)
- Hierarchical modelling in biology: systematic building of limb models
Authors: Fazekas, Cs; Kozmann, Gy; Hangos, KMDate: 2005.Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-6)
- Dynamic analysis and control of a simple nonlinear limb model
Authors: Csercsik, D; Fazekas, Cs; Hangos, KMDate: 2005.Published by: EMBECâ05. 3rd European medical and biological engineering conference IFMBE European conference on biologicall engineering. Prague, 2005. (Page: 1-3)
- Experiment design for parameter estimation of a multi-scale arm model
Authors: Fazekas, Cs; Hangos, KMDate: 2005.Published by: Proceedings of the 6th international PhD workshop on systems and control. Izola, 2005. (Page: 1-6)
- Modeling and optimization of runway traffic flow using coloured Petri nets
Authors: Kovács, Á; Németh, E; Hangos, KMDate: 2005.Published by: ICCA 2005. 2005 International conference on control and automation. Budapest, 2005. (Page: 881-886)
- Quasi-polynomial system representation for the analysis and control of nonlinear systems
- A graph theoretical method in controller structure selection for quasi polynomial systems
Authors: Schné, T; Hangos, KMDate: 2005.Published by: Process Controlâ05. 15th international conference on process control. StrbskĂŠ Pleso, 2005. (Page: 094-1-094-10)
- Hybrid modelling and control of an industrial vaporizer
Authors: Rozgonyi, Sz; Hangos, KMDate: 2005.Published by: Process Controlâ05. 15th international conference on process control. StrbskĂŠ Pleso, 2005. (Page: 021-1-021-18)
- Prediction-based diagnosis and loss prevention using qualitative multi-scale models
Authors: Németh, E; Lakner, R; Hangos, KM; Cameron, ITDate: 2005.Published by: ESCAPE-15. European symposium on computer aided process engineering â 15. Barcelona, 2004. (Page: 535-540)
- A multi-agent prediction-based diagnosis system
Authors: Németh, E; Lakner, R; Hangos, KMDate: 2005.Published by: Proceedings of the 6th international PhD workshop on systems and control. Izola, 2005. (Page: 1-6)
- Stability analysis and feedback design for QP systems
Authors: Magyar, A; Hangos, KMDate: 2004.Published by: Systems and Control. A young generation viewpoint.Proceedongs of the 5th international PhD workshop Balatonfüred (Page: 5 pages)
- Structural analysis of the computational properties of QP-DAE systems
Authors: Ingram, GD; Leitold, A; Hangos, KMDate: 2004.Published by: European Symposium on Computer- Aided Process Engineering-14, (ESCAPE-14) Lisbon (Page: 1063-1068)
- Feedforward pressure limiter control for mechatronic air management systems
Authors: Németh, H; Palkovics, L; Hangos, KMDate: 2004.Published by: Advanced Vehicle Control. Proceedings of the 7th International Symposium AVEC'04, Arnheim (Page: 7 pages)
- Stability of zero dynamics of a low-power gas turbine
Authors: Pongrácz, B; Ailer, P; Szederkényi, G; Hangos, KMDate: 2004.Published by: Control and Automation. Proceedings of the 12th Mediterranean Conference MED 2004, Kusadasi (Page: 5 pages)
- Zero dynamics of SISO quasi polynomial systems
Authors: Schné, T; Hangos, KMDate: 2004.Published by: Systems and Control. A young generation viewpoint.Proceedongs of the 5th international PhD workshop Balatonfüred (Page: 7 pages)
- Nonlinear zero dynamics analysis and control of a low power gas turbine
Authors: Pongrácz, B; Ailer, P; Szederkényi, G; Hangos, KMDate: 2004.Published by: Systems and Control. A young generation viewpoint.Proceedongs of the 5th international PhD workshop Balatonfüred (Page: 6 pages)
- Lotka-Volterra representation of process systems for stability analysis
Authors: Magyar, AI; Hangos, KMDate: 2003.Published by: 14th international conference on process control. Process control' 03. Strbské Pleso, 2003 (Page: 121-1-121-8)
- Nemlineáris állapotmegfigyelő tervezése fermentációs folyamatokhoz
Authors: Péni, T; Hangos, KM; Bokor, JDate: 2003.Published by: MicroCAD-2003. Nemzetközi tudományos konferencia. Miskolc, 2003 (Page: 63-68)
- Construction of minimal models for control purposes
Authors: Lakner, R; Hangos, KM; Cameron, ITDate: 2003.Published by: European Symposium on Computer Aided Process Engineering, 13(Computer-Aided Chemical Engineering, 14) (Page: 755-760)
- Nonlinear dynamic output feedback control of fermentation processes
Authors: Péni, T; Szederkényi, G; Hangos, KMDate: 2003.Published by: 14th international conference on process control. Process control' 03. Strbské Pleso, 2003 (Page: 130-1-130-10)
- The effect of algebraic equations on the stability of process systems modelled by differential algebraic equations
Authors: Pongrácz, B; Szederkényi, G; Hangos, KMDate: 2003.Published by: European Symposium on Computer Aided Process Engineering, 13(Computer-Aided Chemical Engineering, 14) (Page: 857-862)
- Model-based nonlinear control of a low-power gas turbine.
Authors: Ailer, P; Szederkényi, G; Hangos, KMDate: 2002.Published by: 15th triennial world congress of the International Federation of Automatic Control. Barcelona
- Parameter-estimation and model validation of a low-power gas turbine.
Authors: Ailer, P; Szederkényi, G; Hangos, KMDate: 2002.Published by: Proceedings of the IASTED international conference. Modelling, identification, and control. Innsbruck (Page: 604-609)
- Computer-aided incremental model building
Authors: Lakner, R; Hangos, KMDate: 2002.Published by: Proceedings of the IASTED international conference. Modelling, identification and control. Innsbruck (Page: 426-431)
- The effect of modelling assumptions on the differential index of lumped process models.
Authors: Tuza, ZS; Szederkényi, G; Hangos, KMDate: 2002.Published by: European symposium on computer aided process engineering - 12. (Computer-aided chemical engineering 10) (Page: 979-984)
- Linear output selection for feedback linearization.
- The effect of algebraic equations on the stability of process systems.
Authors: Pongrácz, B; Szederkényi, G; Hangos, KMDate: 2002.Published by: Proceedings of the 3rd international PhD workshop: Advances in supervision and control systems young generation viewpoint. Strunjan (Page: 85-90)
- A new structured approach to the teaching of process modelling and model analysis.
Authors: Cameron, IT; Hangos, KMDate: 2001.Published by: 6th World congress of chemical engineering. Melbourne, 2001. (Page: 12)
- Nonlinear control design of a low-power gas turbine.
Authors: Ailer, P; Szederkényi, G; Hangos, KMDate: 2001.Published by: The 2nd international PhD student workshop on systems and control. "Young generation's viewpoint." Balatonfüred, 2001. (Page: 1-10)
- Assumption retrieval from process models.
Authors: Lakner, R; Hangos, KM; Cameron, ITDate: 2001.Published by: European symposium on computer aided process engineering - 11. 34th European symposium of the working party on computer aided process engineering. ESCAPE-11. Kolding, 2001. (Computer-aided chemical engineering, 9.) (Page: 195-200)
- Assumption based modelling and model documentation.
Authors: Williams, R; Hangos, KM; McGahey, S; Cameron, LTDate: 2001.Published by: 6th World congress of chemical engineering. Melbourne, 2001. (Page: 9)
- Reachability of nonlinear fed-batch fermentation processes.
Authors: Szederkényi, G; Kovács, M; Hangos, KMDate: 2001.Published by: The 2nd international PhD student workshop on systems and control. "Young generation's viewpoint." Balatonfüred, 2001. (Page: 41-54)
- Intelligent assumption retrieval from process models by model-based reasoning.
Authors: Lakner, R; Hangos, KMDate: 2001.Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence, 2070.) (Page: 145-154)
- Grey-box characterization on nonlinear process systems.
- Grey box process modelling for fault detection and isolation.
Authors: Hangos, KM; Szaederkényi, GDate: 1999.Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)
- Systems-governing principles and multimedia. Extended abstracts.
Authors: Vámos, T; Bokor, J; Hangos, KMEditor: Chen, HF; Cheng, DZDate: 1999.Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. (Page: CD-Rom)
- On probabilistic modeling in fault detection.
Authors: Kárny, M; Hangos, KMDate: 1999.Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)
- A toolbox for model-based fault detection and isolation.
Authors: Tesar, L; Berec, L; Dolanc, G; Szederkényi, G; Kadlec, J; Juricic, D; Hangos, KM; Kinnaert, MDate: 1999.Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)
- Tapasztalatok a Hungarnet hierarchikus cache rendszerében.
- SDG model-based structuresfor fault detection.
Authors: Gál, IP; Hangos, KMDate: 1998.Published by: IFAC workshop on on-line-fault detection and supervisionin the chemical process industries. Conferences. Lyon, 1998. Vol. 1. (Page: 1-6)
- A CPN model of an internet object cache.
Authors: Kolics, B; Hangos, KMDate: 1998.Published by: Workshop on practical use of coloured Petri nets and design/CPN. Aarhus, 1998. (Page: 233-248)
- Experimental investigation of hierarchical Internet object cachecharacteristics.
Authors: Kolics, B; Hangos, KM; Tétényi, IDate: 1998.Published by: INET'98. The Internet summit. The annual meeting of theInternet Society. Geneva, 1998.
- Simultaneousfault detection of heat exchangers.
Authors: Szederkényi, G; Weyer, E; Hangos, KMDate: 1998.Published by: IFAC workshop on on-line-fault detection and supervision in the chemical process industries. Posters. Lyon, 1998. (Page: 1-6)
- On algebraic model transformations.
Authors: Leitold, A; Hangos, KMDate: 1998.Published by: Computer-intensive methods in control and data processing. Can we beat the course of dimensionality? CPM'98. Preprints of the 3rdEuropean IEEE workshop. Prague, 1998. (Page: 133-138)
- An intelligent diagnostic systembased on Petri nets.
Authors: Szücs, A; Gerzson, M; Leitold, A; Hangos, KMDate: 1997.Published by: Workshop automation 2001. Proceedings. Vienna, 1997. (Page: 113-122)
- The ubiquity of system science. Philosophy and teaching.
Authors: Vámos, T; Bokor, J; Hangos, KEditor: Koussoulas, NT; Groumpos, PPDate: 1997.Published by: LSS'98. Large scale systems: theory and applications. 8th IFAC/IFORS/IMACS/IFIP symposium. Preprints. Rio Patras, 1998. (Page: 10-15)
- Grey box fault detection in heat exchanger networks.
Authors: Weyer, E; Hangos, KMDate: 1997.Published by: IFAC symposium on fault detection, supervision and safety for technical processes. SAFEPROCESS '97. Preprints. Hull, 1997. Vol. 1. (Page: 187-192)
- Graph-theoretic method for integrated process, control and diagnostic system synthesis.
Authors: Gál, IP; Hangos, KMDate: 1996.Published by: Modelling and simulation 1996. European simulation multiconference. Budapest, 1996. (Page: 719-723)
- Knowledge acquisition in a qualitative diagnostic toolbox.
Authors: Gál, IP; Znidarsic, A; Csáki, ZS; Hangos, KM; Juricic, DDate: 1996.Published by: Proceedings. IEEE-SMC CESA'96 IMACS multiconference. Symposium on robotics and cybernetics. Lille, 1996. (Page: 105-109)
- Computational aspects of graph theoretic methods in control.
Authors: Hangos, KM; Tuza, ZSDate: 1996.Published by: Preprints of the second European IEEE workshop on computer-intensive methods in control and signal processing. CMP'96. Prague, 1996. (Page: 25-36)
- Process structure driven control structure selection.
Authors: Hangos, KM; Tuza, ZSDate: 1996.Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. M. Chemical process control, mineral, metal, mining. (Page: 187-192)
- The relation between u and l1 robust analysis results
Authors: Kovács, GZ; Varga, EI; Hangos, KMDate: 1995.Published by: Automatizálás '95 konferencia nemzetközi részvétellel. Automation '95 with international participation. Proceedings. Budapest, 1995. Vol. 1. (Page: 241-250)
- The effect of design parameters on robust performance
Authors: Varga, EI; Bokor, J; Hangos, KMDate: 1995.Published by: ACASP'95. Adaptive systems in control and signal processing. 5th IFAC symposium. Preprints. Budapest, 1995 (Page: 353-358)
- Fuzzy learning for qualitative prediction
Authors: Csáki, ZS; Hangos, KMDate: 1995.Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 609-627)
- Robust analysis of distillation column dynamics
Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KMDate: 1995.Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338)
- Grey box identification of vehicle dynamics
Authors: Gianone, L; Bokor, J; Hangos, KDate: 1994.Published by: SYSID'94. 10th IFAC symposium on system identification. Copenhagen, 1994. Vol. 3. (Page: 225-230)
- The effect of model formulation on the complexity of control problems
Authors: Hangos, K; Rónyai, LDate: 1994.Published by: CMP'94. IEEE European workshop on computer-intensive methods in control and signal processing. Prague, 1994 (Page: 215-227)
- Start-up of process plants by conservative learning based qualitative reasoning
Authors: Csáki, ZS; Hangos, KDate: 1994.Published by: SICICA'94. Intelligent components and instruments for control applications. 2nd IFAC symposium. Preprints. Budapest, 1994 (Page: 328-333)
- Robust analysis of potential large overshoots in heat exchanger networks
Authors: Varga, EI; Bokor, J; Hangos, KDate: 1994.Published by: ACC'94. Proceedings of the 1994 American control conference. Baltimore, 1994. Vol. 2. (Page: 1422-1426)
- Grey-box modeling for identification and control: an emerging discipline or an established technology?
Authors: Jorgensen, SB; Hangos, KDate: 1994.Published by: SYSID'94. 10th IFAC symposium on system identification. Copenhagen, 1994. Vol. 3. (Page: 231-236)
- A graph-theoretic approach to integrated process and control system synthesis
Authors: Hangos, K; Friedler, F; Varga, JB; Fan, LTDate: 1994.Published by: IPDC'94. IFAC workshop on integration of process design and control. Preprints. Baltimore, 1994 (Page: 58-63)
- Use of qualitative models for the choice of design parameters of MBPC
Authors: Hangos, KM; Csáki, ZS; Varga, EIDate: 1993.Published by: Advances in model-based predictive control. Conference proceedings. Oxford, 1993. Vol. 1. (Page: 53-64)
- Grey dynamics of heat exchanger networks
Authors: Varga, EI; Bokor, J; Hangos, KMDate: 1993.Published by: 12th IFAC world congress. Preprints. Sydney, 1993. Vol.2. (Page: 149-154)
- Lessons learned from a prototype operator advisor system for real-time process control
Authors: Csáki, ZS; Hangos, KMDate: 1992.Published by: ECAI 92. 10th European Conference on Artificial Intelligence. Workshop notes W9. Advances in real-time expert systems technologies (Page: 23-31)
- Complexity of dynamic models for intelligent control
Authors: Hangos, KMDate: 1992.Published by: IFAC workshop on mutual impact of computing power and control theory. MICC '92 Preprints. Prague, 1992 (Page: 45-56)
- Structural control properties of technological networks
Authors: Hangos, KMDate: 1992.Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 445-454)
- The effect of the heat exchanger network topology on the network control properties
Authors: Varga, EI; Hangos, KMDate: 1992.Published by: Proceedings of the 2nd IFAC workshop on system structure and control, Prague, 1992 (Page: 220-223)
ISI journal article- Final comments by the authors.
Authors: Gábor, A.; Fazekas, C.; Szederkényi, Gábor; Hangos, KatalinDate: 2011.Published by: European Journal of Control (Volume no.: 17, Issue no.: 1, Page: 119-122.)
- Modeling and identification of a nuclear reactor with temperature effects and xenon posioning.
Authors: Gábor, A.; Fazekas, Cs.; Szederkényi, Gábor; Hangos, KatalinDate: 2011.Published by: European Journal of Control (Volume no.: 17, Issue no.: 1, Page: 104-115. )
- Domain of attraction analysis of a controlled hybrid reactor model.
Authors: Rozgonyi, S.; Hangos, KatalinDate: 2011.Published by: Annals of Nuclear Energy (Volume no.: 38, Page: 969-975.)
- Maximal and minimal realizations of reaction kinetic systems: computation and properties.
- Decentralised controller stucture design and retrofit of process systems based on graph theory.
Authors: Schné, T.; Hangos, KatalinDate: 2011.Published by: International Journal of Systems Science (Volume no.: 42, Issue no.: 6, Page: 1023-1033.)
- Finding complex balanced and detailed balanced realizations of chemical reaction networks.
- Hodgkin-Huxley type modelling and parameter estimation of GnRH neurons.
- Identification and dynamic inversion-based control of a pressurizer at the Paks NPP.
- A procedure ontology for advanced diagnosis of process systems.
- Determining the domain of attraction of hybrid non-linear systems using maximal Lyapunov functions.
- Verification of a primary-to-secondary leaking safety procedure in a nuclear power plant using coloured Petri nets.
- Some complexity problems on single input double output controllers.
Authors: Hangos, Katalin; Tuza, Zsolt; Yeo, A.Date: 2009.Published by: Discrete Applied Mathematics (Volume no.: 157, Issue no.: 5, Page: 1146-1158.)
- Nonlinear reference tracking control of a gas turbine with load torque estimation.
Authors: Pongrácz, Barna; Ailer, Piroska; Hangos, Katalin; Szederkényi, GáborDate: 2008.Published by: International Journal of Adaptive Control and Signal Processing (Volume no.: 22, Issue no.: 8, Page: 757-773.)
- A simple reaction kinetic model of rapid (G protein dependent) and slow (b-Arrestin dependent) transmission.
- Globally stabilizing feedback control of process systems in generalized Lotka-Volterra form.
- Parameter estimation of a simple primary circuit model of a VVER plant.
Authors: Fazekas, Csaba; Szederkényi, Gábor; Hangos, KatalinDate: 2008.Published by: IEEE Transactions on Nuclear Science (Volume no.: 55, Issue no.: 5, Page: 2643--2653.)
- Local dissipative Hamiltonian description of reversible reaction networks.
Authors: Oteo-Muras, Irene; Szederkényi, Gábor; Alonso, Antonio A.; Hangos, KatalinDate: 2008.Published by: Systems and Control Letters (Volume no.: 57, Issue no.: 7, Page: 554-560.)
- Dynamic analysis and control of biochemical reaction networks.
Authors: Otero-Muras, I.; Szederkényi, Gábor; Hangos, Katalin; Alonso, A.Date: 2008.Published by: Mathematics and Computers in Simulation (Volume no.: 79, Issue no.: 4, Page: 999-1009)
- Multiagent realization of prediction-based diagnosis and loss prevention
Authors: Lakner, Rozália; Németh, Erzsébet; Hangos, Katalin; Cameron, ITDate: 2006.Published by: Lecture notes in artificial intelligence (Volume no.: 4031, Page: 70-80)
- State tomography for two qubits using reduced densities
Authors: Petz, D; Hangos, Katalin; Szántó, A; Szöllősi, FDate: 2006.Published by: Journal of Physics A-Mathematical and General (Issue no.: 39, Page: 10901-10907)
- An algorithm for determining a class of invariants in quasi-polynomial systems
Journal article- Modeling and identification of a nuclear eactor with temperature effects and xenon posioning
- Számítógéppel támogatott folyamatmérnökség - hazai és nemzetközi eredmények, a jövő kihívásai.
Authors: Abonyi , J.; Hangos, KatalinDate: 2011.Published by: Magyar Kémiai Folyóirat (Volume no.: 117, Issue no.: 4, Page: 157-165.)
- Parameter sensitivity analysis of a synchronous generator.
Authors: Fodor, A.; Magyar, A.; Hangos, KatalinDate: 2011.Published by: Hungarian Journal of Industrial Chemistry (Volume no.: 38, Page: 21-26.)
- Model-based fault detection and isolation using process mining.
Authors: Werner-Stark, Á.; Gerzson, M.; Hangos, KatalinDate: 2011.Published by: World Academy of Science, Engineering and Technology (Issue no.: 73, Page: 851-856.)
- Mass action realizations of reaction kinetic system models on various time scales.
- Modelling of rapid and slow transmission using the theory of reaction kinetic networks.
- Engineering model reduction and entropy-based Lyapunov functions in chemical reaction kinetics.
Authors: Hangos, KatalinDate: 2010.Published by: Entropy (Volume no.: 12, Page: 772-797.)
- Reaction kinetic models of rapid (g-protein dependent) and slow (beta-arrestin dependent) transmission'
Authors: Csercsik, Dávid; Hangos, Katalin; Nagy, GyörgyDate: 2008.Published by: Proc. IBRO International Workshop on Complex Neural Networks. From synaptic transmission to seeing the brain in action
- Point estimation of states of finite quantum systems.
Authors: Petz, D.; Hangos, Katalin; Magyar, AttilaDate: 2007.Published by: Journal of Physics A: Mathematical and Theoretical (Volume no.: 40, Page: 7955-7969.)
- Multiscale modeling and time-scale analysis of a auman limb.
Authors: Fazekas, Csaba; Kozmann, Gy.; Hangos, KatalinDate: 2007.Published by: Multiscale Modeling and Simulation (Volume no.: 6, Page: 761-791.)
- A simple dynamic model of the primary circuit in VVER plants for controller design purposes.
- Prediction-based diagnosis and loss prevention using qualitative multi-scale models.
- Biomechanikai rendszerek többléptékű modellezése
Authors: Fazekas, Csaba; Kozmann, György; Hangos, KatalinDate: 2006.Published by: IME (Informatika és Menedzsment az Egészségügyben) (Volume no.: 5, Issue no.: 3, Page: 45-48.)Download article: [pdf]
- Dízelmotorok turbókésedelmének vizsgálata dinamikus motormodellekkel.
Authors: Németh, H; Ailer, P; Hangos, Katalin; Stukovszky, ZsDate: 2006.Published by: A Jövő Járműve - Járműipari Innováció (Issue no.: 1-2, Page: 53-56)
- Diagnosztikai feladatok megvalósítása ágens-alapú technikával.
- On minimal models of process systems
Authors: Lakner, R; Hangos, KM; Cameron, ITDate: 2005.Published by: CHEMICAL ENGINEERING SCIENCE (Volume no.: 60, Issue no.: 4, Page: 1127-1142)
- Numerical method-independent structural solvability analysis of Dae models.
Authors: Leitold, A.; Hangos, KatalinDate: 2005.Published by: Hungarian Journal of Industrial Chemistry Veszprém (Volume no.: 33, Issue no.: 1-2, Page: 11-21.)
- Diagnostic goal driven modelling and simulation of multiscale process systems
Authors: Németh, E; Cameron, IT; Hangos, KMDate: 2005.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 29, Issue no.: 4, Page: 783-796)
- Prediction-based diagnosis and loss prevention using model-based reasoning
Authors: Németh, E; Lakner, R; Hangos, KM; Cameron, ITDate: 2005.Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3533, Page: 367-369)
- On the time-reparametrization of quasi-polynomial systems
- Unified model simplification procedure applied to a single protection valve
Authors: Németh, H; Palkovics, L; Hangos, KMDate: 2005.Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 13, Issue no.: 3, Page: 315-326)
- The effect of model simplification assumptions on the differential index of lumped process models
- Process systems: theory and applications from different aspects
- Global stability and quadratic Hamiltonian structure in Lotka-Volterra and quasi-polynomial systems
Authors: Szederkényi, G; Hangos, KMDate: 2004.Published by: PHYSICS LETTERS A (Volume no.: 324, Issue no.: 5-6, Page: 437-445)
- Classification and analysis of integrating frameworks in multiscale modelling
Authors: Ingram, GD; Cameron, IT; Hangos, KMDate: 2004.Published by: CHEMICAL ENGINEERING SCIENCE (Volume no.: 59, Page: 2171-2187)
- Feedforward bang-bang control design for electro-pneumatic protection valves
Authors: Németh, H; Palkovicz, L; Hangos, KMDate: 2004.Published by: PERIODICA POLYTECHNICA-TRANSPORTATION ENGINEERING (Volume no.: 32, Issue no.: 1-2, Page: 3-20)
- Elektro-pneumatikus védőszelep rendszeridentifikációja
Authors: Németh, H; Hangos, KMDate: 2003.Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 33-42)
- Nonlinear modelling and model verification of a single protection valve
Authors: Németh, H; Ailer, P; Hangos, KMDate: 2003.Published by: PERIODICA POLYTECHNICA-TRANSPORTATION ENGINEERING (Volume no.: 30, Issue no.: 1-2, Page: 69-92)
- Effect of steady state assumption on the structural solvability of dynamic process models.
Authors: Leitold, A; Hangos, KMDate: 2002.Published by: HUNGARIAN JOURNAL OF INDUSTRIAL CHEMISTRY (Volume no.: 30, Page: 61-71)
- Reachability of nonlinear fed-batch fermentation processes.
Authors: Szederkényi, G; Kovács, M; Hangos, KMDate: 2002.Published by: INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL (Volume no.: 12, Page: 1109-1124)
- Nonlinear model-building of a low-power gas turbine.
Authors: Ailer, P; Sánta, I; Szederkényi, G; Hangos, KMDate: 2002.Published by: PERIODICA POLYTECHNICA-TRANSPORTATION ENGINEERING (Volume no.: 29, Issue no.: 1-2, Page: 117-135)
- Nonlinear analysis and control of a continuous fermentation process
Authors: Szederkényi, G; Kristensen, NR; Hangos, KM; Jorgensen, SBDate: 2002.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 26, Page: 659-670)
- Structure simplification of dynamic process models
Authors: Leitold, A; Hangos, KM; Tuza, ZSDate: 2002.Published by: JOURNAL OF PROCESS CONTROL (Volume no.: 12, Page: 69-83)
- A formal representation of assumptions in process modelling.
Authors: Hangos, KM; Cameron, LTDate: 2001.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 25, Page: 237-255)
- Hamiltonian view of process systems.
- Optimal control structure selection for process systems.
Authors: Hangos, KM; Tuza, ZSDate: 2001.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 25, Page: 1521-1536)
- Structural solvability analysis of dynamic process models.
Authors: Leitold, A; Hangos, KMDate: 2001.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 25, Page: 1633-1646)
- Grey box fault detection of heat exchangers.
Authors: Weyer, E; Szederkényi, G; Hangos, KMDate: 2000.Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 8, Issue no.: 2, Page: 121-131)
- Thermodynamic approach to the structural stability of process plants.
Authors: Hangos, KM; Alonso, AA; Perkins, JD; Ydstie, BEDate: 1999.Published by: AICHE JOURNAL (Volume no.: 45, Issue no.: 4, Page: 802-816)
- An assumption-driven case-specific model editor.
Authors: Lakner, R; Cameron, IT; Hangos, KMDate: 1999.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 23, Issue no.: Suppl., Page: S 695-S 698)
- Process model structure simplification.
Authors: Hangos, KM; Tuza, ZSDate: 1999.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 23, Issue no.: Suppl., Page: S 343-S 346)
- Integrated structure design of a process and its control system.
Authors: Gál, IP; Varga, JB; Hangos, KMDate: 1998.Published by: JOURNAL OF PROCESS CONTROL (Volume no.: 8, Issue no.: 4, Page: 251-263)
- Notes on ? and 1 1 robustness tests.
Authors: Kovács, GZ; Hangos, KMDate: 1998.Published by: KIBERNETIKA (Volume no.: 34, Issue no.: 5, Page: 565-578)
- Invariant inheritance in structured operating procedures described by petri nets.
Authors: Kránicz, B; Gerzson, M; Hangos, KMDate: 1998.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 22, Issue no.: Suppl., Page: S969-S972)
- An intelligent diagnostic system based on Petri nets.
Authors: Szűcs, A; Gerzson, G; Hangos, KMDate: 1998.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 22, Issue no.: 9, Page: 1335-1344)
- Irányított technológiai rendszerek vizsgálata magas szintű Petri-hálók segítségével. II. Analízis.
Authors: Gerzson, M; Leitold, A; Hangos, KMDate: 1997.Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 103, Issue no.: 5, Page: 209-223)
- Irányított technológiai rendszerek vizsgálata magas szintű Petri-hálók segítségével. I. Modellezés.
Authors: Gerzson, M; Leitold, A; Hangos, KMDate: 1997.Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 103, Issue no.: 5, Page: 197-208)
- Structural stability of chemical process plants.
Authors: Hangos, KM; Perkins, JDDate: 1997.Published by: AICHE JOURNAL (Volume no.: 43, Issue no.: 6, Page: 1511-1518)
- The formal representation of process system modelling assumptions and their implications.
Authors: Hangos, KM; Cameron, ITDate: 1997.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 21, Issue no.: Suppl., Page: S823-S828)
- An intelligent diagnostic system based on Petri nets.
Authors: Szűcs, A; Gerzson, M; Hangos, KMDate: 1996.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 20, Issue no.: Suppl. A, Page: S635-S640)
- Operátori eljárásokkal irányított rendszerek leírása a rendszer kvalitatív modellje alapján magas szintű Petri hálók segítségével
Authors: Gerzson, M; Hangos, KMDate: 1995.Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 101, Issue no.: 3, Page: 97-114)
- Integrated synthesis of a process and its fault-tolerant control system
Authors: Hangos, KM; Varga, JB; Friedler, F; Fan, LTDate: 1995.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 19, Issue no.: suppl., Page: S465-S470)
- Analysis of controlled technological systems using high level Petri nets
Authors: Gerzson, M; Hangos, KMDate: 1995.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 19, Issue no.: suppl., Page: S531-S536)
- Note on the effect of recycle on the dynamics of chemical process plants
Authors: Hangos, KM; Varga, EIDate: 1995.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 19, Issue no.: 5, Page: 607-610)
- Controllability and observability of heat exchanger networks in the time-varying parameter case
Authors: Varga, EI; Hangos, KM; Szigeti, FDate: 1995.Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 3, Issue no.: 10, Page: 1409-1419)
- Grey-box modelling for control: Qualitative models as a unifying framework
Authors: Jörgensen, SB; Hangos, KMDate: 1995.Published by: INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING (Volume no.: 9, Issue no.: 6, Page: 547-562)
- Az Akadémia tudományos bizottságai - műszaki kémikus szemmel
Authors: Blickle, T; Hangos, KDate: 1994.Published by: MAGYAR TUDOMANY (Volume no.: 39, Issue no.: 12, Page: 1505-1508)
- A magyar kemometriai kutatások helyzete és fejlődésének lehetséges irányai
Authors: Hangos, KDate: 1994.Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 100, Issue no.: 6, Page: 251-256)
- Qualitative model based verification of operating procedures by high level Petri nets.( ESCAPE-3. European symposium on computer aided process engineering-3)
Authors: Gerzson, M; Csáki, ZS; Hangos, KMDate: 1993.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 18, Issue no.: Suppl., Page: S565-S569)
- The effect of the heat exchanger network topology on the network control properties
Authors: Varga, EI; Hangos, KMDate: 1993.Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 1, Issue no.: 2, Page: 375-380)
- Így látom
Authors: Hangos, KMDate: 1992.Published by: OTKA HIRLEVEL (Volume no.: 2, Page: 15-16)
- Qualitative model-based intelligent control of a distillation column
Authors: Hangos, KM; Csáki, ZS; Jörgensen, SBDate: 1992.Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 5, Issue no.: 5, Page: 431-440)
- Qualitative simulation in the limit
Authors: Hangos, KM; Csáki, ZSDate: 1992.Published by: ARTIFICIAL INTELLIGENCE IN ENGINEERING (Volume no.: 7, Issue no.: 2, Page: 105-109)
- Technológiai hálózatok strukturális szabályozástechnikai tulajdonságai
Authors: Hangos, KMDate: 1992.Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 12-15)
- A tool for development of qualitative and approximate quantitative process models
Authors: Németh, T; Varga, EI; Hangos, KM; Jörgensen, SBDate: 1992.Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 16, Issue no.: (suppl), Page: S491-S498)
New search
|