Katalin Hangos, Prof, research advisor
Katalin Hangos
Address: 1111 Budapest, Kende u. 13-17.
Room number: K 429
Phone: +36 1 279 6101
Fax: +36 1 466 7483
E-mail: hangosEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.hu
Homepage: http://daedalus.scl.sztaki.hu/PCRG/members/hangos/
Department: Process Control Research Group

Publications

[order by time] [order by categories ] [order by authors]

2009.

Modeling and Identification of a Nuclear Reactor with Temperature Dependent Reactivity
Authors: Fazekas, Csaba; Gábor, Attila; Hangos, Katalin
Department: Process Control Research Group
Date: 2009.
Published by: European Control Conference - ECC 2009, Budapest, Hungary (Page: 3509-3514)
Dynamical Modeling and Identification of a GnRH neuron
Model synthesis and identification of a Hodgkin-Huxley-type GnRH neuron model
Authors: Csercsik, Dávid; Szederkényi, Gábor; Hangos, Katalin; Farkas, Imre
Department: Process Control Research Group
Date: 2009.
Published by: Proceedings of the European Control Conference, Budapest, Hungary (Page: 3058-3063)
Verification of a primary-to-secondary leaking safety procedure in a nuclear power plant using coloured Petri nets.
Authors: Németh, Erzsébet; Bartha, Tamás; Fazekas, Csaba; Hangos, Katalin
Department: Process Control Research Group
Date: 2009.
Published by: Reliability Engineering and System Safety (Volume no.: 94 , Issue no.: 5, Page: 942-953.)
Dynamic Modeling and Analysis of a Synchronous Generator in a Nuclear Power Plant
Modeling and Identification of a Nuclear Reactor with Temperature Effects and Xenon Poisoning
Fault diagnosis based on hazard identification results
Authors: Németh, Erzsébet; Lakner, Rozália; Cameron, Ian; Hangos, Katalin
Department: Process Control Research Group
Date: 2009.
Published by: Preprints of the 7th IFAC Symposium onFault Detection, Supervision and Safety of Technical Processes, Barcelona, Spain, June 30 - July 3 (Page: 1515-1520)
Proceedings of the Workshop on Systems and Control Theory in honor of József Bokor on his 60th birthday
Authors: Hangos, Katalin; Szederkényi, Gábor
Editor: Hangos, Katalin; Nádai, László
Department: Process Control Research Group
Date: 2009.
Published by: Proceedings of the Workshop on Systems and Control Theory in honor of József Bokor on his 60th birthday (Page: 121-139)
Some complexity problems on single input double output controllers
Authors: Hangos, Katalin; Tuza, Zsolt
Department: Process Control Research Group
Date: 2009.
Published by: Discrete Applied Mathematics (Volume no.: 157, Page: 1146-1158)
Line Conditioning with Grid Synchronized Inverter's Power Injection of Renewable Sources in Nonlinear Distorted Mains
Some complexity problems on single input double output controllers
Authors: Hangos, K. M.; Tuza, Zs.; Yeo, A.
Department: Combinatorial Computer Science Research Group
Date: 2009.
Published by: Discrete Applied Mathematics (Volume no.: 157, Issue no.: 5, Page: 1146-1158)

2008.

A simple reaction kinetic model of rapid (G protein dependent) and slow (b-Arrestin dependent) transmission.
Authors: Csercsik, Dávid; Hangos, Katalin; Nagy , György M.
Department: Process Control Research Group
Date: 2008.
Published by: Journal of Theoretical Biology (Volume no.: 255, Page: 119-128)
Determining flat outputs of MIMO nolinear systems using directed graphs.
Authors: Csercsik, Dávid; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2008.
Published by: CONTROLO 2008. 8th Portuguese conference on automatic control. Vila Real, 2008. (Page: 450-455.)
A procedure ontology for advanced diagnosis of process systems.
Authors: Hangos, Katalin; Németh, Erzsébet; Lakner, Rozália
Editor: Lovrek, I; Howlett , RJ; Jain, LC
Department: Process Control Research Group
Date: 2008.
Published by: KES 2008. 12th international conference on knowledge-based and intelligent information and engineering systems. Zagreb, 2008. Part 1. (Lecture notes in artificial ingelligence 5177.) (Page: 501-508.)
Reaction kinetic models of rapid (g-protein dependent) and slow (beta-arrestin dependent) transmission'
Authors: Csercsik, Dávid; Hangos, Katalin; Nagy, György
Date: 2008.
Published by: Proc. IBRO International Workshop on Complex Neural Networks. From synaptic transmission to seeing the brain in action
Analysis of the networked implementation of the primary circuit pressurizer controller at a nuclear power plant.
Authors: Szederkényi, Gábor; Szabó, Zoltán; Bokor, József; Hangos, Katalin
Department: Process Control Research Group
Date: 2008.
Published by: MED 2008. 16th Mediterranean conference on control and automation. Ajaccio, 2008. (Page: 1604-1609.)
A functional systems approach to the development of improved hazard identification for advanced diagnostic systems.
Authors: Cameron, I. T.; Seligmann, B.; Hangos, Katalin; Németh, Erzsébet; Lakner, R.
Editor: Braunschweig, B.; Joulia, X.
Department: Process Control Research Group
Date: 2008.
Published by: ESCAPE 18. 18th European symposium on computer aided process engineering. Lyon, 2008. (Page: 1-6.)
Parameter estimation of Hodgkin-Huxley model of GnRH neurons.
Authors: Csercsik, Dávid; Szederkényi, Gábor; Hangos, Katalin; Farkas, Imre
Editor: Gasperin, M; Pregelj, B
Department: Process Control Research Group
Date: 2008.
Published by: 9th international PhD workshop on systems and control. Izola, 2008. (Length: 1-6. (CD))
Parameter estimation of a simple primary circuit model of a VVER plant.
Authors: Fazekas, Csaba; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2008.
Published by: IEEE Transactions on Nuclear Science (Volume no.: 55, Issue no.: 5, Page: 2643--2653.)
Quantum state tomography with finite sample size.
Authors: Petz, Dénes; Hangos, Katalin; Ruppert, László
Editor: Accardi, L; Freudenberg, W; Ohya, M
Department: Process Control Research Group
Date: 2008.
Published by: Quantum bio-informatics from quantum informatics to bio-informatics. (Page: 247-257.)
Nonlinear reference tracking control of a gas turbine with load torque estimation.
Authors: Pongrácz, Barna; Ailer, Piroska; Hangos, Katalin; Szederkényi, Gábor
Department: Process Control Research Group
Date: 2008.
Published by: International Journal of Adaptive Control and Signal Processing (Volume no.: 22, Issue no.: 8, Page: 757-773.)
Dynamic analysis and control of biochemical reaction networks.
Authors: Otero-Muras, I.; Szederkényi, Gábor; Hangos, Katalin; Alonso, A.
Department: Process Control Research Group
Date: 2008.
Published by: Mathematics and Computers in Simulation (Volume no.: 79, Issue no.: 4, Page: 999-1009)
Local dissipative Hamiltonian description of reversible reaction networks.
Authors: Oteo-Muras, Irene; Szederkényi, Gábor; Alonso, Antonio A.; Hangos, Katalin
Department: Process Control Research Group
Date: 2008.
Published by: Systems and Control Letters (Volume no.: 57, Issue no.: 7, Page: 554-560.)
Identification of the primary circuit dynamics in a pressurized water nuclear power plant.
Authors: Fazekas , Csaba; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2008.
Published by: IFAC 2008. 17th IFAC World congress. Seoul, 2008. (Page: 10640-10645.)
Globally stabilizing feedback control of process systems in generalized Lotka-Volterra form.
Authors: Magyar, Attila; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2008.
Published by: Journal of Process Control (Volume no.: 18, Page: 80-91)
Towards optimal quantum state estimation of a qubit by using indirect measurements.
Authors: Ruppert, László; Magyar, Attila; Hangos, Katalin; Petz, Dénes
Date: 2008.
Published by: Research Report of the Systems and Control Laboratory SCL-002/2008. (Page: 24)

2007.

Control of mass action law based reaction networks.
Authors: Magyar, Attila; Szederkényi, Gábor; Hangos, Katalin
Editor: Mikles, J.; Fikar, M.; Kvasnica, M.
Department: Process Control Research Group
Date: 2007.
Published by: Proceedings of the 16th international conference on process control. Strbské Pleso, 2007. (Page: 120-1-120-7.)
Modeling and simulation of the primary circuit of the Paks nuclear power plant for control and diagnosis.
Authors: Németh, Erzsébet; Fazekas, Csaba; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: EUROSIM 2007. Proceedings of the 6th EUROSIM congress on modelling and simulation. Ljubljana, 2007. Vol. 2. (Page: 1-8.)
Simulator for multi-scale musculoskeletal models with reflex circuits.
Authors: Fazekas, Csaba; Csercsik, Dávid; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: EUROSIM 2007. Proceedings of the 6th EUROSIM congress on modelling and simulation. Ljubljana, 2007. Vol. 2. (Page: 1-6. (CD))
Estimating the region of stability for a hybrid model.
Authors: Rozgonyi, Sz.; Hangos, Katalin
Editor: Mikles, J.; Fikar, M.; Kvasnica, M.
Department: Process Control Research Group
Date: 2007.
Published by: Proceedings of the 16th international conference on process control. Strbské Pleso, 2007. (Page: 012-1-012-8.)
The P3 formalism: a basics for improved diagnosis in complex systems.
Authors: Cameron, I.T.; Seligmann, B.; Hangos, Katalin; Lakner, R.; Németh, Erzsébet
Department: Process Control Research Group
Date: 2007.
Published by: CHEMECA 2007. Conference proceedings. Melbourne, 2007. (Page: 1077-1088.)
Process control based on physically inherent passivity.
Authors: Hangos, Katalin; Szederkényi, Gábor
Department: Process Control Research Group
Date: 2007.
Published by: Process control: the passive systems approach. (Advances in industrial control.) (Page: 193-224.)
Comparison of some methods of quantum state estimation.
Authors: Baier, T.H.; Petz, Dénes; Hangos, Katalin; Magyar, Attila
Department: Process Control Research Group
Date: 2007.
Published by: Quantum probability and infinite dimensional analysis. Proceedings of the 26th conference. Levico, 2005. (Page: 64-78.)
Cascade stabilization and reference tracking of a simple nonlinear limb model.
Authors: Csercsik, Dávid; Szederkényi, Gábor; Hangos, Katalin
Editor: Bruzzone, L.
Department: Process Control Research Group
Date: 2007.
Published by: Proceedings of the 26th IASTED international conference on modelling, identification and control. Innsbruck, 2007. (Page: 369-374.)
Model identification of the primary circuit at the Paks nuclear power plant.
Authors: Fazekas, Csaba; Szederkényi, Gábor; Hangos, Katalin
Editor: Bruzzole, L.
Department: Process Control Research Group
Date: 2007.
Published by: Proceedings of the 26th IASTED international conference on modelling, identification and control. Innsbruck, 2007. (Page: 464-469.)
A simple dynamic model of the primary circuit in VVER plants for controller design purposes.
Authors: Fazekas, Csaba; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: Nuclear Engineering and Design (Volume no.: 237, Page: 1071-1087.)
Prediction-based diagnosis and loss prevention using qualitative multi-scale models.
Authors: Németh, Erzsébet; Lakner, R.; Hangos, Katalin; Cameron, I.T.
Department: Process Control Research Group
Date: 2007.
Published by: Information Sciences (Volume no.: 177, Page: 1916-1930.)
Point estimation of states of finite quantum systems.
Authors: Petz, D.; Hangos, Katalin; Magyar, Attila
Department: Process Control Research Group
Date: 2007.
Published by: Journal of Physics A: Mathematical and Theoretical (Volume no.: 40, Page: 7955-7969.)
Nonlinear lumping of cascade activation reactions.
Authors: Csercsik, Dávid; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: Research Report of the Systems and Control Laboratory SCL-003/2007. (Length: 39)
Parameter estimation of a simple hierarchial arm model.
Authors: Fazekas, Csaba; Kozmann, Gy.; Magos, T.; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: Technical report of the Systems and Control Laboratory SCL-002/2007. (Length: 31)
A non-invasive parameter estimation method based on a planar multi-scale arm model.
Authors: Fazekas, Csaba; Kozmann, Gy.; Magos, T.; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: Proceedings of the 8th international PhD workshop on systems and control a young generation viewpoint. Balatonfüred, 2007. (Page: 106-111.)
Dynamics of quantum mechanical systems under weak measurement.
Authors: Magyar, Attila; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: Proceedings of the 8th international PhD workshop on systems and control a young generation viewpoint. Balatonfüred, 2007. (Page: 49-54.)
Multiscale modeling and time-scale analysis of a auman limb.
Authors: Fazekas, Csaba; Kozmann, Gy.; Hangos, Katalin
Department: Process Control Research Group
Date: 2007.
Published by: Multiscale Modeling and Simulation (Volume no.: 6, Page: 761-791.)

2006.

Bayesian qubit state estimation
Authors: Magyar, Attila; Petz, Dénes; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: SYSID-2006. Preprints of the 14th IFAC symposium on system identification. Newcastle, 2006. (Page: 949-954)
Linear and nonlinear control of muscoskeletal systems
Authors: Fazekas, Csaba; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: MIC 2006. Proceedings of the 25th IASTED international conference on modelling, identification and control. Lanzarote, 2006. (Page: 219-224)
Multiagent realization of prediction-based diagnosis and loss prevention
Authors: Lakner, Rozália; Németh, Erzsébet; Hangos, Katalin; Cameron, IT
Department: Process Control Research Group
Date: 2006.
Published by: Lecture notes in artificial intelligence (Volume no.: 4031, Page: 70-80)
Dynamic analysis and control of chemical and biochemical reaction networks
Authors: Otero-Muras, I; Szederkényi, Gábor; Alonso, AA; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: ADCHEM 2006. International symposium on advanced control of chemical processes. Preprints.Gramado, 2006. Vol. 1. (Page: 165-170)
Nonlinear control design for a mechatronic protection valve
Authors: Palkovics, László; Németh, Huba; Hangos, Katalin
Editor: Bokor, József; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: Proceedings of the workshop on system identification and control systems in honor of László Keviczky on his 60th birthday. Budapest, 2005. (Page: 63-80)
Dynamic analysis and control of biochemical reaction networks
Authors: Otero-Muras, I; Szederkényi, Gábor; Hangos, Katalin; Alonso, AA
Editor: Troch, I
Department: Process Control Research Group
Date: 2006.
Published by: MATHMOD 2006. 5th Vienna symposium on mathematical modelling. Proceedings. Vienna, 2006. Vol. 2. (Volume no.: 2, Page: 4-1-4-10)
Process control based on physical insight: passivity and Hamiltonian system models
Authors: Hangos, Katalin; Szederkényi, Gábor; Otero-Muras, Irene
Editor: Bokor, József; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: Proceedings of the workshop on system identification and control systems in honor of László Keviczky on his 60th birthday. Budapest, 2005. (Page: 129-146)
Quasi-polynomial and Lotka-Volterra representation in nonlinear systems and control theory
Authors: Szederkényi, Gábor; Magyar, Attila; Hangos, Katalin
Editor: Bokor, József; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: Proceedings of the workshop on system identification and control systems in honor of László Keviczky on his 60th birthday. Budapest, 2005. (Page: 147-163)
Modeling and model identification of a pressurizer at the Paks Nuclear Power Plant
Authors: Varga, István; Szederkényi, Gábor; Hangos, Katalin; Bokor, József
Department: Process Control Research Group
Date: 2006.
Published by: SYSID-2006. Preprints of the 14th IFAC symposium on system identification. Newcastle, 2006. (Page: 678-683)
Diagnostic goal-driven reduction of multiscale process models
Authors: Németh, Erzsébet; Lakner, Rozália; Hangos, Katalin
Editor: Gorban, AN; Kazantzis, NK; Kevrekidis, IG; Öttinger, HC; Theodoropoulos, C
Department: Process Control Research Group
Date: 2006.
Published by: Model reduction and coarse-graining approaches for multiscale phenomena (Page: 465-487)
Agent-based diagnosis for granulation processes
Authors: Lakner, Rozália; Németh, Erzsébet; Hangos, Katalin; Cameron, IT
Editor: Marquardt, W; Pantelides, C
Department: Process Control Research Group
Date: 2006.
Published by: ESCAPE-16 - PSE 2006. 16th European symposium on computer aided process engineering and 9th international symposium on process systems engineering. Garmisch-Partenkirchen, 2006. (Page: 1443-1448)
An algorithm for determining a class of invariants in quasi-polynomial systems
Authors: Pongrácz, Barna; Szederkényi, Gábor; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: Computer Physics Communications (Volume no.: 175, Page: 204-211)
Estimating the stability region of a controlled pressurized water reactor
Authors: Rozgonyi, Szabolcs; Hangos, Katalin
Editor: Monostori, László; Ilie-Zudor, Angyalka Elisabeth
Department: Process Control Research Group
Date: 2006.
Published by: MITIP 2006. 8th international conference on the modern information technology in the innovation processes of the industrial enterprises. Budapest, 2006. (Page: 391-396)
Improved estimation method of region of stability for nonlinear autonomous systems
Authors: Rozgonyi, Szabolcs; Hangos, Katalin
Editor: Smídl, V
Department: Process Control Research Group
Date: 2006.
Published by: Proceedings of the 7th international PhD workshop: young generation viewpoint. Hrubá Skála, 2006. (Page: 234-241)
Improved estimation method of region of stability for nonlinear autonomous systems
Authors: Rozgonyi, Szabolcs; Hangos, Katalin; Szederkényi, Gábor
Department: Process Control Research Group
Date: 2006.
Published by: Technical report of the Systems and Control Laboratory SCL-002/2006. (Length: 15)
Download article: [pdf]
State estimation of N-level quantum systems.
Authors: Petz, Dénes; Hangos, Katalin; Magyar, Attila; Ruppert, László
Department: Process Control Research Group
Date: 2006.
Published by: Technical report of the Systems and Control Laboratory SCL-007/2006. (Length: 32)
Download article: [pdf]
Dízelmotorok turbókésedelmének vizsgálata dinamikus motormodellekkel.
Authors: Németh, H; Ailer, P; Hangos, Katalin; Stukovszky, Zs
Department: Process Control Research Group
Date: 2006.
Published by: A Jövő Járműve - Járműipari Innováció (Issue no.: 1-2, Page: 53-56)
State tomography for two qubits using reduced densities
Authors: Petz, D; Hangos, Katalin; Szántó, A; Szöllősi, F
Department: Process Control Research Group
Date: 2006.
Published by: Journal of Physics A-Mathematical and General (Issue no.: 39, Page: 10901-10907)
Multiscale process modeling
Authors: Cameron, IT; Ingram, GD; Hangos, Katalin
Editor: Puigjaner, L; Heyen, G
Department: Process Control Research Group
Date: 2006.
Published by: Computer aided process and product engineering. Vol. 1. (Page: 198-221)
Model tuning, discrimination, and verification
Authors: Hangos, Katalin; Lakner, Rozália
Editor: Puigjaner, L; Heyen, G
Department: Process Control Research Group
Date: 2006.
Published by: Computer aided process and product engineering. Vol. 1. (Page: 171-187)
Biomechanikai rendszerek többléptékű modellezése
Authors: Fazekas, Csaba; Kozmann, György; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: IME (Informatika és Menedzsment az Egészségügyben) (Volume no.: 5, Issue no.: 3, Page: 45-48.)
Download article: [pdf]
Diagnosztikai feladatok megvalósítása ágens-alapú technikával.
Authors: Németh, Erzsébet; Lakner, R.; Hangos, Katalin
Department: Process Control Research Group
Date: 2006.
Published by: Acta Agraria Kaposváriensis (Volume no.: 10, Issue no.: 3, Page: 211-222.)

2005.

Bayesian qubit tomography
Authors: Magyar, A; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Proceedings of the 6th international PhD workshop on systems and control. Izola, 2005. (Page: 1-6)
Quasi-polynomial system representation for the analysis and control of nonlinear systems
Authors: Magyar, A; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-6)
A multi-agent prediction-based diagnosis system
Authors: Németh, E; Lakner, R; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Proceedings of the 6th international PhD workshop on systems and control. Izola, 2005. (Page: 1-6)
On minimal models of process systems
Authors: Lakner, R; Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2005.
Published by: CHEMICAL ENGINEERING SCIENCE (Volume no.: 60, Issue no.: 4, Page: 1127-1142)
Modeling and optimization of runway traffic flow using coloured Petri nets
Authors: Kovács, Á; Németh, E; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: ICCA 2005. 2005 International conference on control and automation. Budapest, 2005. (Page: 881-886)
Dynamic analysis and control of a simple nonlinear limb model
Authors: Csercsik, D; Fazekas, Cs; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: EMBEC’05. 3rd European medical and biological engineering conference IFMBE European conference on biologicall engineering. Prague, 2005. (Page: 1-3)
Experiment design for parameter estimation of a multi-scale arm model
Authors: Fazekas, Cs; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Proceedings of the 6th international PhD workshop on systems and control. Izola, 2005. (Page: 1-6)
Hierarchical modelling in biology: systematic building of limb models
Authors: Fazekas, Cs; Kozmann, Gy; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Preprints of the 16th IFAC world congress. Prague, 2005. (Page: 1-6)
Diagnostic goal driven modelling and simulation of multiscale process systems
Authors: Németh, E; Cameron, IT; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 29, Issue no.: 4, Page: 783-796)
Diagnostic goal-driven reduction of multiscale process models. (Research report SCL-001/2005.)
Authors: Németh, E; Lakner, R; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: (Length: 23)
Hybrid modelling and control of an industrial vaporizer
Authors: Rozgonyi, Sz; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Process Control’05. 15th international conference on process control. Strbské Pleso, 2005. (Page: 021-1-021-18)
A graph theoretical method in controller structure selection for quasi polynomial systems
Authors: Schné, T; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: Process Control’05. 15th international conference on process control. Strbské Pleso, 2005. (Page: 094-1-094-10)
On the time-reparametrization of quasi-polynomial systems
Authors: Szederkényi, G; Hangos, KM; Magyar, A
Department: Process Control Research Group
Date: 2005.
Published by: PHYSICS LETTERS A (Volume no.: 334, Issue no.: 4, Page: 288-294)
Nonlinear zero dynamics analysis and control of a low power gas turbine. (Research report SCL-003/2005.)
Authors: Pongrácz, B; Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: (Length: 15)
An algorithm for determining a class of invariants in quasi-polynomial systems. (Research report SCL-002/2005.)
Authors: Pongrácz, B; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: (Length: 25)
Prediction-based diagnosis and loss prevention using model-based reasoning
Authors: Németh, E; Lakner, R; Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2005.
Published by: LECTURE NOTES IN COMPUTER SCIENCE (Volume no.: 3533, Page: 367-369)
Prediction-based diagnosis and loss prevention using qualitative multi-scale models
Authors: Németh, E; Lakner, R; Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2005.
Published by: ESCAPE-15. European symposium on computer aided process engineering – 15. Barcelona, 2004. (Page: 535-540)
Unified model simplification procedure applied to a single protection valve
Authors: Németh, H; Palkovics, L; Hangos, KM
Department: Process Control Research Group
Date: 2005.
Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 13, Issue no.: 3, Page: 315-326)
Numerical method-independent structural solvability analysis of Dae models.
Authors: Leitold, A.; Hangos, Katalin
Department: Process Control Research Group
Date: 2005.
Published by: Hungarian Journal of Industrial Chemistry Veszprém (Volume no.: 33, Issue no.: 1-2, Page: 11-21.)

2004.

Structural analysis of the computational properties of QP-DAE systems
Authors: Ingram, GD; Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: European Symposium on Computer- Aided Process Engineering-14, (ESCAPE-14) Lisbon (Page: 1063-1068)
Coloured Petri Net Model of a Simple Runway. (Research report SCL-001/2004)
Authors: Kovács, Á; Németh, E; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Coloured Petri Net Model of a Simple Runway. (Research report SCL-001/2004) (Page: 27)
Stability analysis and feedback design for QP systems
Authors: Magyar, A; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Systems and Control. A young generation viewpoint.Proceedongs of the 5th international PhD workshop Balatonfüred (Page: 5 pages)
Classification and analysis of integrating frameworks in multiscale modelling
Authors: Ingram, GD; Cameron, IT; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: CHEMICAL ENGINEERING SCIENCE (Volume no.: 59, Page: 2171-2187)
Process systems: theory and applications from different aspects
Authors: Hangos, KM; Szederkényi, G
Department: Process Control Research Group
Date: 2004.
Published by: ERCIM NEWS (Issue no.: 56, Page: 35-36)
Hierarchical modelling in biology: A systematic build-up of a limb model. (Technical report SCL-003/2004)
Authors: Fazekas, CS; Kozmann, GY; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Hierarchical modelling in biology: A systematic build-up of a limb model. (Technical report SCL-003/2004) (Page: 50)
The effect of model simplification assumptions on the differential index of lumped process models
Authors: Hangos, KM; Szederkényi, G; Tuza, ZS
Department: Process Control Research Group
Date: 2004.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 28, Page: 129-137)
Multi-scale process model description by generalized hierarchical CPN models. (Research report SCL-002/2004)
Authors: Németh, E; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Multi-scale process model description by generalized hierarchical CPN models. (Research report SCL-002/2004) (Page: 19)
Feedforward bang-bang control design for electro-pneumatic protection valves
Authors: Németh, H; Palkovicz, L; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: PERIODICA POLYTECHNICA-TRANSPORTATION ENGINEERING (Volume no.: 32, Issue no.: 1-2, Page: 3-20)
Zero dynamics of SISO quasi polynomial systems
Authors: Schné, T; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Systems and Control. A young generation viewpoint.Proceedongs of the 5th international PhD workshop Balatonfüred (Page: 7 pages)
Zero dynamics of SISO quasi-polynomial systems. (Technical report SCL-005/2004)
Authors: Schné, T; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Zero dynamics of SISO quasi-polynomial systems. (Technical report SCL-005/2004) (Page: 17)
Global stability and quadratic Hamiltonian structure in Lotka-Volterra and quasi-polynomial systems
Authors: Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: PHYSICS LETTERS A (Volume no.: 324, Issue no.: 5-6, Page: 437-445)
The structure and analysis of QP-DAE system models. (Research report SCL-004/2004)
Authors: Pongrácz, B; Ingram, G; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: The structure and analysis of QP-DAE system models. (Research report SCL-004/2004) (Page: 37)
Stability of zero dynamics of a low-power gas turbine
Authors: Pongrácz, B; Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Control and Automation. Proceedings of the 12th Mediterranean Conference MED 2004, Kusadasi (Page: 5 pages)
Feedforward pressure limiter control for mechatronic air management systems
Authors: Németh, H; Palkovics, L; Hangos, KM
Date: 2004.
Published by: Advanced Vehicle Control. Proceedings of the 7th International Symposium AVEC'04, Arnheim (Page: 7 pages)
Nonlinear zero dynamics analysis and control of a low power gas turbine
Authors: Pongrácz, B; Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2004.
Published by: Systems and Control. A young generation viewpoint.Proceedongs of the 5th international PhD workshop Balatonfüred (Page: 6 pages)
Analysis and Control of Nonlinear Process Systems (Advanced Textbooks in Control and Signal Processing)
Authors: Hangos, KM; Bokor, J; Szederkényi, G
Department: Process Control Research Group
Date: 2004.
Published by: Analysis and Control of Nonlinear Process Systems (Advanced Textbooks in Control and Signal Processing) (Page: 308)

2003.

Hierarchical CPN model-based diagnosis using HAZOP knowledge. (Research report SCL-009/2003)
Authors: Németh, E; Lakner, R; Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2003.
Published by: Hierarchical CPN model-based diagnosis using HAZOP knowledge. (Research report SCL-009/2003) (Page: 24)
On some properties of quasi-polynomial ordinary differential equations and differential algebraic (QP-DAE) equations (Research report SCL-010/2003)
Authors: Magyar, A; Ingram, G; Pongrácz, B; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2003.
Published by: On some properties of quasi-polynomial ordinary differential equations and differential algebraic (QP-DAE) equations (Research report SCL-010/2003) (Page: 43)
Lotka-Volterra representation of process systems for stability analysis
Authors: Magyar, AI; Hangos, KM
Department: Process Control Research Group
Date: 2003.
Published by: 14th international conference on process control. Process control' 03. Strbské Pleso, 2003 (Page: 121-1-121-8)
Construction of minimal models for control purposes
Authors: Lakner, R; Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2003.
Published by: European Symposium on Computer Aided Process Engineering, 13(Computer-Aided Chemical Engineering, 14) (Page: 755-760)
Elektro-pneumatikus védőszelep rendszeridentifikációja
Authors: Németh, H; Hangos, KM
Department: Process Control Research Group
Date: 2003.
Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 33-42)
Nonlinear control of an electro-pneumatic protection valve for circuit pressure limiting. (Research report SCL-005/2003)
Authors: Németh, H; Hangos, KM
Department: Process Control Research Group
Date: 2003.
Published by: Nonlinear control of an electro-pneumatic protection valve for circuit pressure limiting. (Research report SCL-005/2003) (Page: 22)
Nonlinear dynamic output feedback control of fermentation processes
Authors: Péni, T; Szederkényi, G; Hangos, KM
Date: 2003.
Published by: 14th international conference on process control. Process control' 03. Strbské Pleso, 2003 (Page: 130-1-130-10)
Nemlineáris állapotmegfigyelő tervezése fermentációs folyamatokhoz
Authors: Péni, T; Hangos, KM; Bokor, J
Date: 2003.
Published by: MicroCAD-2003. Nemzetközi tudományos konferencia. Miskolc, 2003 (Page: 63-68)
System identification of an electro-pneumatic protection valve. (Research report SCL-001/2003)
Authors: Németh, H; Palkovics, L; Hangos, KM
Date: 2003.
Published by: System identification of an electro-pneumatic protection valve. (Research report SCL-001/2003) (Page: 29)
Nonlinear modelling and model verification of a single protection valve
Authors: Németh, H; Ailer, P; Hangos, KM
Department: Process Control Research Group
Date: 2003.
Published by: PERIODICA POLYTECHNICA-TRANSPORTATION ENGINEERING (Volume no.: 30, Issue no.: 1-2, Page: 69-92)
The effect of algebraic equations on the stability of process systems modelled by differential algebraic equations
Authors: Pongrácz, B; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2003.
Published by: European Symposium on Computer Aided Process Engineering, 13(Computer-Aided Chemical Engineering, 14) (Page: 857-862)

2002.

Reachability of nonlinear fed-batch fermentation processes.
Authors: Szederkényi, G; Kovács, M; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL (Volume no.: 12, Page: 1109-1124)
Nonlinear analysis and control of a continuous fermentation process
Authors: Szederkényi, G; Kristensen, NR; Hangos, KM; Jorgensen, SB
Department: Process Control Research Group
Date: 2002.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 26, Page: 659-670)
Effect of steady state assumption on the structural solvability of dynamic process models.
Authors: Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: HUNGARIAN JOURNAL OF INDUSTRIAL CHEMISTRY (Volume no.: 30, Page: 61-71)
Computer controlled systems.
Authors: Hangos, KM; Bokor, J; Szederkényi, G
Department: Process Control Research Group
Date: 2002.
Published by: Computer controlled systems. (Page: 150)
Nonlinear model-building of a low-power gas turbine.
Authors: Ailer, P; Sánta, I; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: PERIODICA POLYTECHNICA-TRANSPORTATION ENGINEERING (Volume no.: 29, Issue no.: 1-2, Page: 117-135)
Model-based nonlinear control of a low-power gas turbine.
Authors: Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: 15th triennial world congress of the International Federation of Automatic Control. Barcelona
Parameter-estimation and model validation of a low-power gas turbine.
Authors: Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: Proceedings of the IASTED international conference. Modelling, identification, and control. Innsbruck (Page: 604-609)
Linear output selection for feedback linearization.
Authors: Szederkényi, G; Hangos, KM; Bokor, J; Vámos, T
Department: Process Control Research Group
Date: 2002.
Published by: 15th triennial world congress of the International Federation of Automatic Control. Barcelona
The effect of modelling assumptions on the differential index of lumped process models.
Authors: Tuza, ZS; Szederkényi, G; Hangos, KM
Date: 2002.
Published by: European symposium on computer aided process engineering - 12. (Computer-aided chemical engineering 10) (Page: 979-984)
The effect of algebraic equations on the stability of process systems.
Authors: Pongrácz, B; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: Proceedings of the 3rd international PhD workshop: Advances in supervision and control systems young generation viewpoint. Strunjan (Page: 85-90)
Model simplification of a single protection valve: a systematic approach. (Research report of the Systems and Controls Laboratory SCL-004/2002.)
Authors: Németh, H; Palkovics, L; Hangos, KM
Date: 2002.
Published by: Model simplification of a single protection valve: a systematic approach. (Research report of the Systems and Controls Laboratory SCL-004/2002.) (Page: 21)
Computer-aided incremental model building
Authors: Lakner, R; Hangos, KM
Department: Process Control Research Group
Date: 2002.
Published by: Proceedings of the IASTED international conference. Modelling, identification and control. Innsbruck (Page: 426-431)
Structure simplification of dynamic process models
Authors: Leitold, A; Hangos, KM; Tuza, ZS
Department: Process Control Research Group
Date: 2002.
Published by: JOURNAL OF PROCESS CONTROL (Volume no.: 12, Page: 69-83)

2001.

Hamiltonian view of process systems.
Authors: Hangos, KM; Bokor, J; Szederkényi, G
Department: Process Control Research Group
Date: 2001.
Published by: AICHE JOURNAL (Volume no.: 47, Issue no.: 8, Page: 1819-1831)
Optimal control structure selection for process systems.
Authors: Hangos, KM; Tuza, ZS
Department: Process Control Research Group
Date: 2001.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 25, Page: 1521-1536)
A formal representation of assumptions in process modelling.
Authors: Hangos, KM; Cameron, LT
Department: Process Control Research Group
Date: 2001.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 25, Page: 237-255)
A new structured approach to the teaching of process modelling and model analysis.
Authors: Cameron, IT; Hangos, KM
Department: Process Control Research Group
Date: 2001.
Published by: 6th World congress of chemical engineering. Melbourne, 2001. (Page: 12)
Modeling and nonlinear analysis of a low-power gas turbine. (Techical report of the Systems and Control Laboratory, SCL-1/2001.)
Authors: Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2001.
Published by: Modeling and nonlinear analysis of a low-power gas turbine. (Techical report of the Systems and Control Laboratory, SCL-1/2001.) (Page: 25)
Nonlinear control design of a low-power gas turbine.
Authors: Ailer, P; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2001.
Published by: The 2nd international PhD student workshop on systems and control. "Young generation's viewpoint." Balatonfüred, 2001. (Page: 1-10)
Some complexity problems on single input double output controllers. (BRICS report series of Department of Computer Science University of Aarhus, RS-01-18.)
Authors: Hangos, KM; Tuza, ZS; Yeo, A
Department: Process Control Research Group
Date: 2001.
Published by: Some complexity problems on single input double output controllers. (BRICS report series of Department of Computer Science University of Aarhus, RS-01-18.) (Page: 27)
Assumption retrieval from process models.
Authors: Lakner, R; Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2001.
Published by: European symposium on computer aided process engineering - 11. 34th European symposium of the working party on computer aided process engineering. ESCAPE-11. Kolding, 2001. (Computer-aided chemical engineering, 9.) (Page: 195-200)
Assumption based modelling and model documentation.
Authors: Williams, R; Hangos, KM; McGahey, S; Cameron, LT
Department: Process Control Research Group
Date: 2001.
Published by: 6th World congress of chemical engineering. Melbourne, 2001. (Page: 9)
Process modelling and model analysis. I(Process systems engineering 4.)
Authors: Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 2001.
Published by: Process modelling and model analysis. I(Process systems engineering 4.) (Page: 543)
Reachability of nonlinear fed-batch fermentation processes.
Authors: Szederkényi, G; Kovács, M; Hangos, KM
Department: Process Control Research Group
Date: 2001.
Published by: The 2nd international PhD student workshop on systems and control. "Young generation's viewpoint." Balatonfüred, 2001. (Page: 41-54)
Structural solvability analysis of dynamic process models.
Authors: Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 2001.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 25, Page: 1633-1646)
Intelligent assumption retrieval from process models by model-based reasoning.
Authors: Lakner, R; Hangos, KM
Department: Process Control Research Group
Date: 2001.
Published by: Engineering of intelligent systems. 14th international conference on industrial and engineering applications of artificial intelligence and expert systems, IEA/AIE. Proceedings. Budapest, 2001. (Lecture notes in artificial intelligence, 2070.) (Page: 145-154)
Intelligent control systems. An introduction with examples. (Applied optimization 60.)
Authors: Hangos, KM; Lakner, R; Gerzson, M
Department: Process Control Research Group
Date: 2001.
Published by: Intelligent control systems. An introduction with examples. (Applied optimization 60.) (Page: 301)

2000.

Grey box fault detection of heat exchangers.
Authors: Weyer, E; Szederkényi, G; Hangos, KM
Department: Process Control Research Group
Date: 2000.
Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 8, Issue no.: 2, Page: 121-131)
Grey-box characterization on nonlinear process systems.
Authors: Hangos, KM; Szederkényi, G; Bokor, J
Department: Process Control Research Group
Date: 2000.
Published by: Literature for Nordic process control workshop 9. Lyngby, 2000. (Page: 17)

1999.

Grey box process modelling for fault detection and isolation.
Authors: Hangos, KM; Szaederkényi, G
Department: Process Control Research Group
Date: 1999.
Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)
Thermodynamic approach to the structural stability of process plants.
Authors: Hangos, KM; Alonso, AA; Perkins, JD; Ydstie, BE
Department: Process Control Research Group
Date: 1999.
Published by: AICHE JOURNAL (Volume no.: 45, Issue no.: 4, Page: 802-816)
Systems-governing principles and multimedia. Extended abstracts.
Authors: Vámos, T; Bokor, J; Hangos, KM
Editor: Chen, HF; Cheng, DZ
Department: Machine-Supported Understanding Research Group
Date: 1999.
Published by: Proceedings of the 14th world congress of IFAC. Preprints. Beijing, 1999. (Page: CD-Rom)
Process model structure simplification.
Authors: Hangos, KM; Tuza, ZS
Department: Process Control Research Group
Date: 1999.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 23, Issue no.: Suppl., Page: S 343-S 346)
Grey-box characterization of nonlinear process systems. (Research report of the Systems and Control Laboratory, SCL-1/1999.)
Authors: Hangos, KM; Szederkényi, G; Bokor, J
Department: Process Control Research Group
Date: 1999.
Published by: Grey-box characterization of nonlinear process systems. (Research report of the Systems and Control Laboratory, SCL-1/1999.) (Page: 17)
A toolbox for model-based fault detection and isolation.
Authors: Tesar, L; Berec, L; Dolanc, G; Szederkényi, G; Kadlec, J; Juricic, D; Hangos, KM; Kinnaert, M
Department: Process Control Research Group
Date: 1999.
Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)
An assumption-driven case-specific model editor.
Authors: Lakner, R; Cameron, IT; Hangos, KM
Department: Process Control Research Group
Date: 1999.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 23, Issue no.: Suppl., Page: S 695-S 698)
On probabilistic modeling in fault detection.
Authors: Kárny, M; Hangos, KM
Department: Process Control Research Group
Date: 1999.
Published by: European control conference. ECC '99. Conference proceedings. Karlsruhe, 1999. (Page: CD-rom)
Dinamikus rendszerek paramétereinek becslése.
Authors: Hangos, KM; Szederkényi, G
Department: Process Control Research Group
Date: 1999.
Published by: Dinamikus rendszerek paramétereinek becslése. (Page: 99)

1998.

Experimental investigation of hierarchical internet object cache characteristics.
Authors: Kolics, B; Hangos, KM; Tétényi, I
Department: Process Control Research Group
Date: 1998.
Published by: Experimental investigation of hierarchical internet object cache characteristics. (Page: 13)
Tapasztalatok a Hungarnet hierarchikus cache rendszerében.
Authors: Kolics, B; Hangos, KM; Tétényi, I
Department: Process Control Research Group
Date: 1998.
Published by: Networkshop '98. Győr, 1998.
Integrated structure design of a process and its control system.
Authors: Gál, IP; Varga, JB; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: JOURNAL OF PROCESS CONTROL (Volume no.: 8, Issue no.: 4, Page: 251-263)
SDG model-based structuresfor fault detection.
Authors: Gál, IP; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: IFAC workshop on on-line-fault detection and supervisionin the chemical process industries. Conferences. Lyon, 1998. Vol. 1. (Page: 1-6)
A CPN model of an internet object cache.
Authors: Kolics, B; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: Workshop on practical use of coloured Petri nets and design/CPN. Aarhus, 1998. (Page: 233-248)
Experimental investigation of hierarchical Internet object cachecharacteristics.
Authors: Kolics, B; Hangos, KM; Tétényi, I
Department: Process Control Research Group
Date: 1998.
Published by: INET'98. The Internet summit. The annual meeting of theInternet Society. Geneva, 1998.
Simultaneousfault detection of heat exchangers.
Authors: Szederkényi, G; Weyer, E; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: IFAC workshop on on-line-fault detection and supervision in the chemical process industries. Posters. Lyon, 1998. (Page: 1-6)
On algebraic model transformations.
Authors: Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: Computer-intensive methods in control and data processing. Can we beat the course of dimensionality? CPM'98. Preprints of the 3rdEuropean IEEE workshop. Prague, 1998. (Page: 133-138)
Invariant inheritance in structured operating procedures described by petri nets.
Authors: Kránicz, B; Gerzson, M; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 22, Issue no.: Suppl., Page: S969-S972)
Notes on ? and 1 1 robustness tests.
Authors: Kovács, GZ; Hangos, KM
Date: 1998.
Published by: KIBERNETIKA (Volume no.: 34, Issue no.: 5, Page: 565-578)
An intelligent diagnostic system based on Petri nets.
Authors: Szűcs, A; Gerzson, G; Hangos, KM
Department: Process Control Research Group
Date: 1998.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 22, Issue no.: 9, Page: 1335-1344)

1997.

Irányított technológiai rendszerek vizsgálata magas szintű Petri-hálók segítségével. I. Modellezés.
Authors: Gerzson, M; Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 1997.
Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 103, Issue no.: 5, Page: 197-208)
Irányított technológiai rendszerek vizsgálata magas szintű Petri-hálók segítségével. II. Analízis.
Authors: Gerzson, M; Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 1997.
Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 103, Issue no.: 5, Page: 209-223)
A technológiai menedzsment modern módszerei.
Authors: Biró, M; Hangos, KM; Krámli, A
Department: Process Control Research Group
Date: 1997.
Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 102-113)
The formal representation of process system modelling assumptions and their implications.
Authors: Hangos, KM; Cameron, IT
Department: Process Control Research Group
Date: 1997.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 21, Issue no.: Suppl., Page: S823-S828)
Structural stability of chemical process plants.
Authors: Hangos, KM; Perkins, JD
Department: Process Control Research Group
Date: 1997.
Published by: AICHE JOURNAL (Volume no.: 43, Issue no.: 6, Page: 1511-1518)
Grey box fault detection in heat exchanger networks.
Authors: Weyer, E; Hangos, KM
Department: Process Control Research Group
Date: 1997.
Published by: IFAC symposium on fault detection, supervision and safety for technical processes. SAFEPROCESS '97. Preprints. Hull, 1997. Vol. 1. (Page: 187-192)
An intelligent diagnostic systembased on Petri nets.
Authors: Szücs, A; Gerzson, M; Leitold, A; Hangos, KM
Department: Process Control Research Group
Date: 1997.
Published by: Workshop automation 2001. Proceedings. Vienna, 1997. (Page: 113-122)
Invariant inhesitance in structured operating procedures described by Petri nets. (Technical report of the Systems and Controls Laboratory, SCL-001-1997.)
Authors: Kránicz, B; Gerzson, M; Hangos, KM
Department: Process Control Research Group
Date: 1997.
Published by: Invariant inhesitance in structured operating procedures described by Petri nets. (Technical report of the Systems and Controls Laboratory, SCL-001-1997.) (Page: 21)
The ubiquity of system science. Philosophy and teaching.
Authors: Vámos, T; Bokor, J; Hangos, K
Editor: Koussoulas, NT; Groumpos, PP
Department: Machine-Supported Understanding Research Group
Date: 1997.
Published by: LSS'98. Large scale systems: theory and applications. 8th IFAC/IFORS/IMACS/IFIP symposium. Preprints. Rio Patras, 1998. (Page: 10-15)

1996.

Graph-theoretic method for integrated process, control and diagnostic system synthesis.
Authors: Gál, IP; Hangos, KM
Department: Process Control Research Group
Date: 1996.
Published by: Modelling and simulation 1996. European simulation multiconference. Budapest, 1996. (Page: 719-723)
Knowledge acquisition in a qualitative diagnostic toolbox.
Authors: Gál, IP; Znidarsic, A; Csáki, ZS; Hangos, KM; Juricic, D
Department: Process Control Research Group
Date: 1996.
Published by: Proceedings. IEEE-SMC CESA'96 IMACS multiconference. Symposium on robotics and cybernetics. Lille, 1996. (Page: 105-109)
Computational aspects of graph theoretic methods in control.
Authors: Hangos, KM; Tuza, ZS
Department: Process Control Research Group
Date: 1996.
Published by: Preprints of the second European IEEE workshop on computer-intensive methods in control and signal processing. CMP'96. Prague, 1996. (Page: 25-36)
Process structure driven control structure selection.
Authors: Hangos, KM; Tuza, ZS
Department: Process Control Research Group
Date: 1996.
Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. M. Chemical process control, mineral, metal, mining. (Page: 187-192)
An intelligent diagnostic system based on Petri nets.
Authors: Szűcs, A; Gerzson, M; Hangos, KM
Department: Process Control Research Group
Date: 1996.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 20, Issue no.: Suppl. A, Page: S635-S640)

1995.

Note on the effect of recycle on the dynamics of chemical process plants
Authors: Hangos, KM; Varga, EI
Department: Process Control Research Group
Date: 1995.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 19, Issue no.: 5, Page: 607-610)
Integrated synthesis of a process and its fault-tolerant control system
Authors: Hangos, KM; Varga, JB; Friedler, F; Fan, LT
Department: Process Control Research Group
Date: 1995.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 19, Issue no.: suppl., Page: S465-S470)
Operátori eljárásokkal irányított rendszerek leírása a rendszer kvalitatív modellje alapján magas szintű Petri hálók segítségével
Authors: Gerzson, M; Hangos, KM
Department: Process Control Research Group
Date: 1995.
Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 101, Issue no.: 3, Page: 97-114)
Analysis of controlled technological systems using high level Petri nets
Authors: Gerzson, M; Hangos, KM
Department: Process Control Research Group
Date: 1995.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 19, Issue no.: suppl., Page: S531-S536)
Grey-box modelling for control: Qualitative models as a unifying framework
Authors: Jörgensen, SB; Hangos, KM
Department: Process Control Research Group
Date: 1995.
Published by: INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING (Volume no.: 9, Issue no.: 6, Page: 547-562)
The relation between u and l1 robust analysis results
Authors: Kovács, GZ; Varga, EI; Hangos, KM
Date: 1995.
Published by: Automatizálás '95 konferencia nemzetközi részvétellel. Automation '95 with international participation. Proceedings. Budapest, 1995. Vol. 1. (Page: 241-250)
Robust analysis of distillation column dynamics
Authors: Varga, EI; Kovács, GZ; Jörgensen, SB; Hangos, KM
Date: 1995.
Published by: DYCORD+'95. 4th IFAC symposium on dynamics and control of chemical reactors, distillation columns, and bath processes. Preprints. Copenhagen, 1995 (Page: 333-338)
Controllability and observability of heat exchanger networks in the time-varying parameter case
Authors: Varga, EI; Hangos, KM; Szigeti, F
Department: Process Control Research Group
Date: 1995.
Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 3, Issue no.: 10, Page: 1409-1419)
The effect of design parameters on robust performance
Authors: Varga, EI; Bokor, J; Hangos, KM
Date: 1995.
Published by: ACASP'95. Adaptive systems in control and signal processing. 5th IFAC symposium. Preprints. Budapest, 1995 (Page: 353-358)
Fuzzy learning for qualitative prediction
Authors: Csáki, ZS; Hangos, KM
Department: Process Control Research Group
Date: 1995.
Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 609-627)

1994.

Grey box identification of vehicle dynamics
Authors: Gianone, L; Bokor, J; Hangos, K
Date: 1994.
Published by: SYSID'94. 10th IFAC symposium on system identification. Copenhagen, 1994. Vol. 3. (Page: 225-230)
Start-up of process plants by conservative learning based qualitative reasoning
Authors: Csáki, ZS; Hangos, K
Department: Process Control Research Group
Date: 1994.
Published by: SICICA'94. Intelligent components and instruments for control applications. 2nd IFAC symposium. Preprints. Budapest, 1994 (Page: 328-333)
Az Akadémia tudományos bizottságai - műszaki kémikus szemmel
Authors: Blickle, T; Hangos, K
Department: Process Control Research Group
Date: 1994.
Published by: MAGYAR TUDOMANY (Volume no.: 39, Issue no.: 12, Page: 1505-1508)
The effect of model formulation on the complexity of control problems
Authors: Hangos, K; Rónyai, L
Department: Process Control Research Group
Date: 1994.
Published by: CMP'94. IEEE European workshop on computer-intensive methods in control and signal processing. Prague, 1994 (Page: 215-227)
A graph-theoretic approach to integrated process and control system synthesis
Authors: Hangos, K; Friedler, F; Varga, JB; Fan, LT
Department: Process Control Research Group
Date: 1994.
Published by: IPDC'94. IFAC workshop on integration of process design and control. Preprints. Baltimore, 1994 (Page: 58-63)
Grey-box modeling for identification and control: an emerging discipline or an established technology?
Authors: Jorgensen, SB; Hangos, K
Department: Process Control Research Group
Date: 1994.
Published by: SYSID'94. 10th IFAC symposium on system identification. Copenhagen, 1994. Vol. 3. (Page: 231-236)
Use of qualitative models for the choice of design parameters of MBPC
Authors: Hangos, K; Csáki, ZS; Varga, EI
Department: Process Control Research Group
Date: 1994.
Published by: Advances in model based predictive control (Page: 344-357)
A magyar kemometriai kutatások helyzete és fejlődésének lehetséges irányai
Authors: Hangos, K
Department: Process Control Research Group
Date: 1994.
Published by: MAGYAR KEMIAI FOLYOIRAT (Volume no.: 100, Issue no.: 6, Page: 251-256)
Robust analysis of potential large overshoots in heat exchanger networks
Authors: Varga, EI; Bokor, J; Hangos, K
Date: 1994.
Published by: ACC'94. Proceedings of the 1994 American control conference. Baltimore, 1994. Vol. 2. (Page: 1422-1426)

1993.

Qualitative model based verification of operating procedures by high level Petri nets.( ESCAPE-3. European symposium on computer aided process engineering-3)
Authors: Gerzson, M; Csáki, ZS; Hangos, KM
Department: Process Control Research Group
Date: 1993.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 18, Issue no.: Suppl., Page: S565-S569)
Use of qualitative models for the choice of design parameters of MBPC
Authors: Hangos, KM; Csáki, ZS; Varga, EI
Department: Process Control Research Group
Date: 1993.
Published by: Advances in model-based predictive control. Conference proceedings. Oxford, 1993. Vol. 1. (Page: 53-64)
The effect of the heat exchanger network topology on the network control properties
Authors: Varga, EI; Hangos, KM
Department: Process Control Research Group
Date: 1993.
Published by: CONTROL ENGINEERING PRACTICE (Volume no.: 1, Issue no.: 2, Page: 375-380)
Grey dynamics of heat exchanger networks
Authors: Varga, EI; Bokor, J; Hangos, KM
Date: 1993.
Published by: 12th IFAC world congress. Preprints. Sydney, 1993. Vol.2. (Page: 149-154)

1992.

Így látom
Authors: Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: OTKA HIRLEVEL (Volume no.: 2, Page: 15-16)
Complexity of dynamic models for intelligent control
Authors: Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: IFAC workshop on mutual impact of computing power and control theory. MICC '92 Preprints. Prague, 1992 (Page: 45-56)
Lessons learned from a prototype operator advisor system for real-time process control
Authors: Csáki, ZS; Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: ECAI 92. 10th European Conference on Artificial Intelligence. Workshop notes W9. Advances in real-time expert systems technologies (Page: 23-31)
DYEDIT - qualitative model editor. Task specification. Vers. 2.0. (Research report of the Systems and Control Laboratory SCL-003-1992)
Authors: Csáki, ZS; Hangos, KM; Varga, EI
Department: Process Control Research Group
Date: 1992.
Published by: DYEDIT - qualitative model editor. Task specification. Vers. 2.0. (Research report of the Systems and Control Laboratory SCL-003-1992) (Page: 19)
Kémiai rendszerek dinamikája (Research report of the Systems and Control Laboratory SCL-002-1992)
Authors: Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: Kémiai rendszerek dinamikája (Research report of the Systems and Control Laboratory SCL-002-1992) (Page: 53)
Qualitative model-based intelligent control of a distillation column
Authors: Hangos, KM; Csáki, ZS; Jörgensen, SB
Department: Process Control Research Group
Date: 1992.
Published by: ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (Volume no.: 5, Issue no.: 5, Page: 431-440)
A tool for development of qualitative and approximate quantitative process models
Authors: Németh, T; Varga, EI; Hangos, KM; Jörgensen, SB
Department: Process Control Research Group
Date: 1992.
Published by: COMPUTERS & CHEMICAL ENGINEERING (Volume no.: 16, Issue no.: (suppl), Page: S491-S498)
Technológiai hálózatok strukturális szabályozástechnikai tulajdonságai
Authors: Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 1, Page: 12-15)
Structural control properties of technological networks
Authors: Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 445-454)
Qualitative simulation in the limit
Authors: Hangos, KM; Csáki, ZS
Department: Process Control Research Group
Date: 1992.
Published by: ARTIFICIAL INTELLIGENCE IN ENGINEERING (Volume no.: 7, Issue no.: 2, Page: 105-109)
The effect of the heat exchanger network topology on the network control properties
Authors: Varga, EI; Hangos, KM
Department: Process Control Research Group
Date: 1992.
Published by: Proceedings of the 2nd IFAC workshop on system structure and control, Prague, 1992 (Page: 220-223)

New search