SZTAKI: Personal information

Magyar
SZTAKIWeb English Search Phonebook Haidegger Géza
Géza Haidegger, Ph.D., senior research fellow Address: 1111 Budapest, Kende u. 13-17. Room number: K 423 Phone: +36 1 2796207, +36 1 279 6224 Fax: +36 1 4667503 E-mail: haideggerEZT_TOROLJE_KI@EZT_TOROLJE_KIsztaki.hu Homepage: http://www.sztaki.hu/munkatars/008001106/ Department: Computer Integrated Manufacturing Laboratory Graduated at the Technical University of Budapest in 1978, begun to work at the Hungarian Academy of Sciences, Computer and Automation Institute, Mechanical Engineering Automation Department. Obtained his second Diploma in 1982 at the Electrical Faculty, Department of Metrology. He got his Ph.D. in 2002. He has been in charge of the design of industrial control systems, such as CNC, distributed PLC systems, industrial cell-controllers. His attention was directed towards standardized communication methods, and focused on MAP networking. He has initiated the East-European MAP/TOP Interest Group, has been elected as Steering Committee member of EMUG and EEMIG, has directed the operation of the MAP Training Center at CAI. Member in Scientific Societies, author and co-author in numerous publications. Main field of interest: communications in CIM systems, networking and recently multimedia in networked architectures. Car recycling, production technologies for micro- and nano-products, robotics are the presently related R&D topics. Project leader of several Hungarian and joint European projects. 100 ++ publications. Publications [order by time] [order by categories ] [order by authors] Agirre Ibarbia, J. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Agirre, J. Smart Connected and Interactive Production Control in a Distributed Environment Authors: Schlegel, T.; Foursa, M.; Meo, F.; Agirre, J.; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. 06. Published by: Proceedings of the 4th Intelligent Production Machines and Systems (IPROMS) Virtual Conference (Length: 6 page) Download article: [html] Anufriev, A Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Armijo, A. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Bausz, I Applying SERCOS industrial control network for OSACA based CNC-s. Authors: Haidegger, G; Nacsa, J; Bausz, I Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of th INCO COPERNICUS project. Budapest, 1998. (Page: 85-92) Birchall, D East-West cooperation Authors: Terk, E; Varblene, U; Birchall, D; Haidegger, G; Viia, A Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Enterprises in technology-intensive business. Toolkit for coping with international environment and developing management competences. Module 2. (Page: 26-39) Biró, Zsolt National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs. Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Bisztray, F Distributed multimedia for advanced applications Authors: Haidegger, G; Bisztray, F Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 263-272) Bogen, M. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Borbás, Lajos Factory of the Future with recycling and resource-efficiency in Manufacturing Authors: Bárdos, ZOltánné; Borbás, Lajos; Igaz, Jenő; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Positioning the MANUFUTURE National Technology Platform to be the driving tool for our surviving national manufacturing. Authors: Haidegger, Géza; Igaz, Jenő; Borbás, Lajos Department: Computer Integrated Manufacturing Laboratory Date: 2010. 04. Published by: Factory automation 2010. Proceedings. Kecskemét, 2010. (Page: 145.) Boril, ZS Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Bámer, B Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei Authors: Kovács, GL; Bámer, B; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54) Recycling technology implementation by the integration of SME operations Authors: Haidegger, G; Kovács, GL; Bámer, B Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615) Bárdos, ZOltánné Factory of the Future with recycling and resource-efficiency in Manufacturing Authors: Bárdos, ZOltánné; Borbás, Lajos; Igaz, Jenő; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Báthor, Miklós Part inspections in 3D; CIS3D, development of a completeness inspection system in 3D for industrial analysis. Authors: Báthor, Miklós; Wögerer, Ch.; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Length: 1-5. page) Canou, J. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Csuzdi , Szonja EUREKA and FP7-NMP, Authors: Wögerer, Christian; Sebő, Gábor; Csuzdi , Szonja; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) d'Angelo, D. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Dickerhoff, M. Technology platform MINAM - an instrument for micro-and nanomanufacturing in Europe. Authors: Wögerer, C.; Dickerhoff, M.; Haidegger, Géza; Szalay, T. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 44-53.) Dickerhoff, Markus Technology platform MINAM - an instrument for micro- and nanomanufacturing in Europe. Authors: Wögerer, Christian; Dickerhoff, Markus; Haidegger, Géza; Szalay, Tibor Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 57-66.) Dobó , József Prepalnned Recycling as a key element for the Factories of the Future Authors: Haidegger, Géza; Dobó , József; Nagy, László Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Drozdik, S Some interactive multimedia applications in production engineering Authors: Kovács, GL; Haidegger, G; Drozdik, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167) Next-generation open controllers needed in the factories of the future. Authors: Drozdik, S; Haidegger, G; Herrera, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 77-81) Drozdik, SZ Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Drozdik, Szilveszter A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Drozdik, Szilveszter Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Erdélyi, F Informatika a gazdaságban. Authors: Erdélyi, F; Szakál, L; Haidegger, G; Vadász, D Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 391-504) Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Falk, GY A LOM szerepe a gépgyártástechnológiában. Látványos és tanulságos üzemlátogatás a FABICAD Kft-nél. Authors: Haidegger, G; Falk, GY Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: GÉPGYÁRTÁS (Volume no.: 39, Issue no.: 2, Page: 7-9) Foursa, M. Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) Smart Connected and Interactive Production Control in a Distributed Environment Authors: Schlegel, T.; Foursa, M.; Meo, F.; Agirre, J.; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. 06. Published by: Proceedings of the 4th Intelligent Production Machines and Systems (IPROMS) Virtual Conference (Length: 6 page) Download article: [html] Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Fuertes, JM International trends on factory data networks. Comments on the 2nd IEEE international workshop on factory communication systems. WFCS'97. Barcelona, 1997. Authors: Fuertes, JM; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of the INCO COPERNICUS project. Budapest, 1998. (Page: 63-75) Gramma, C. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Grosse-Hovest, G. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Groumpos, P Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Haidegger, G East-West cooperation Authors: Terk, E; Varblene, U; Birchall, D; Haidegger, G; Viia, A Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Enterprises in technology-intensive business. Toolkit for coping with international environment and developing management competences. Module 2. (Page: 26-39) Appropriate information processing for telemonitoring of manufacturing processes Authors: Szalay, T; Repcsényi, Z; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005. (Page: 51-56) Solutions for an interpreter-enabled multimedia conferencing system Authors: Sárközy, F; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 32-33) Some interactive multimedia applications in production engineering Authors: Kovács, GL; Haidegger, G; Drozdik, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167) Interactive multimedia for supporting the quality of the production Authors: Kovács, GL; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45) Business growth through European partnerships conference for SME-s. Budapest, 2005. Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: (Length: 141 page) Multimedia technologies provide test scenarios in a national research project Authors: Kovács, G; Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei Authors: Kovács, GL; Bámer, B; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54) Technology and science for the information society. HUN-TING Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Projects of the Centres of Excellence in candidate countries. Cyprus, 2003 (Page: 1-2) Az EU 5. és 6. K+F keretprogramja, EUREKA. Tapasztalatok, lehetőségek, kihívások Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Gyorsan megtérülő gépipari technológiai eljárások. Esztergom, 2003 (Page: 98-100) Recycling technology implementation by the integration of SME operations Authors: Haidegger, G; Kovács, GL; Bámer, B Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615) Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Digital factories, production networks. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54) Assessment of multimedia technologies for use in digital factory projects. Authors: Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 495-499) Intelligent, open architecture controller using knowledge server. Authors: Nacsa, J; Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33) Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Digital enterprises: A national R&D project in Hungary. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272) Nyílt rendszerek a gyártásautomatizálásban. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2001. Published by: (Page: 113) Some problems of intelligent control of open CNCs and manufacturing cells. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28) Application of virtual reality tools for planning, analysing and control of flexible manufacturing systems. Authors: Kopácsi, S; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Applied informatics (AI'2000). Proceedings of IASTED international conference. Innsbruck, 2000. (Page: 198-202) Interactive multimedia as an affordable tool in factory environment. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: ASI'2000. The annual conference of ICIMS-NOE. Workshop on integration in manufacturing and beyond. IIMB'2000. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Bordeaux, 2000. (Page: 6-7) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Trends in industrial data networks. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: MicroCAD '99. International computer science conference. Miskolc, 1999. (Page: 77-81) Nyílt EU-pályázatok. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: BYTE MAGYARORSZ (Volume no.: 3, Issue no.: 7, Page: 27-28) Műszaki-társadalmi célkitűzések az EU 5. Keretprogramjában. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: 37. ipari elektronikus mérés és szabályozás szimpózium előadásai. Székesfehérvár, 1999. (Page: CD-rom) Kutatási-fejlesztési irányok az európai unió 5. keretprogramja tükrében: a GTE pályázati információs központ működése és szolgáltatásai. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: X. (jubileumi) országos tűzvédelmi konferencia-szeminárium '99. előadásainak gyűjteménye. Gyula, 1999. (Page: 228-233) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Minőségmenedzsment és informatika. (Page: 84-137) A LOM szerepe a gépgyártástechnológiában. Látványos és tanulságos üzemlátogatás a FABICAD Kft-nél. Authors: Haidegger, G; Falk, GY Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: GÉPGYÁRTÁS (Volume no.: 39, Issue no.: 2, Page: 7-9) Next-generation open controllers needed in the factories of the future. Authors: Drozdik, S; Haidegger, G; Herrera, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 77-81) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8) Multimedia applications in a virtual enterprise of SME-s. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212) Az interaktív multimédia. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mérés-automatizálás "98 konferencia az "alkalmazott informatika" jegyében. (Page: 337-341) Nyílt ipari vezérlőrendszerek. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mérés-automatizálás '98 konferencia az "alkalmazott informatika" jegyében. Budapest, 1998. (Page: 195-197) Hálózatok és interaktív multimédia lehetőségek. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Kárpát-medencei műszaki konferencia. Információs technológiák és technológia transzfer nemzetközi konferencia. Székesfehérvár, 1998. (Page: 52-55) Advanced communication technologies in the factories of the future. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican-Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 3) Applying SERCOS industrial control network for OSACA based CNC-s. Authors: Haidegger, G; Nacsa, J; Bausz, I Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of th INCO COPERNICUS project. Budapest, 1998. (Page: 85-92) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) International trends on factory data networks. Comments on the 2nd IEEE international workshop on factory communication systems. WFCS'97. Barcelona, 1997. Authors: Fuertes, JM; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of the INCO COPERNICUS project. Budapest, 1998. (Page: 63-75) Built-in intelligent control applications of open CNCs. Authors: Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 388-392) A multimedia design network for manufacturing systems' management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339) Multimedia design network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K) Shop-floor communication with OSACA-compliant controllers. Authors: Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 355-362) Factory communication systems to meet multi-media requirements. Authors: Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 317-320) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Multimedia requirements for management and control of manufacturing systems. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 117-122) Interaktiv multimedia (ipari) alkalmazásai. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: XXXII. ipari informatika, elektronika, mérés és szabályozás szimpózium előadásai. IEMSZSZ '97. Budapest, 1997. (Page: 1-2) Guidelines on interactive multimedia for use in distance education: the results of EU ACTS projects in interactive multimedia. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: 1997 European Distance Education Network (EDEN) conference. Budapest, 1997. (Page: 166-169) Dissemination by guidelines on interactive multimedia, the results of EU ACTS projects. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: ICOMT '97. 2nd international conference of multimedia technology and digital telecommunication services. Proceedings. Budapest, 1997. (Page: 99-103) Informatika a gazdaságban. Authors: Erdélyi, F; Szakál, L; Haidegger, G; Vadász, D Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 391-504) Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Intelligent control of manufacturing systems using open communications. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180) Telepresence with remote vision in robotic applications. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD '96. Budapest, 1996. Vol. 1. (Page: 557-562) Linking remote intelligent vision systems. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: MECHATRONICS '96 - MMVIP '96. The 5th UK mechatronics forum international conference. The 3rd international conference on mechatronics and machine vision in practice. Proceedings. Guimaraes, 1996. Vol. 1. (Page: 1-297-1-302) Látórendszerek a mechatronikában. Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Mechatronika '96. 7. Mechatroninfo konferencia előadásainak anyaga. Budapest, 1996. (Page: 71-73) Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: GEPGYARTASTECHNOLOGIA (Volume no.: 35, Issue no.: 3-4, Page: 117-120) Open systems in manufacturing, European and world-wide harmonized initiatives Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 55-59) Open systems in manufacturing Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 252-259) Highly automated flexible assembly system Authors: Haidegger, G; Kuba, R Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 347-353) EMUG, EMTUG, EUROSMIG és AIT. Kapcsolódási lehetőségeink európai közösségi projektekhez Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: MicroCAD '95. International computer science conference. Section H: Information technology in mechanical engineering. Miskolc, 1995 (Page: 82-85) Distributed multimedia for advanced applications Authors: Haidegger, G; Bisztray, F Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 1. (Page: 263-272) Distributed control of assembly cells based on virtual manufacturing device model Authors: Nagy, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: DCCS'94. Distruted computer control systems. Preprints of the 12th IFAC workshop. Toledo, 1994 (Page: 77-82) Nyílt rendszerek a gyártás-automatizálásban Authors: Haidegger, G; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 43-49) Ivhegesztő robotos CAD/CAM munkaállomás specifikálása Authors: Haidegger, G; Nacsa, J; Vass, J; Pepper, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IX. hegesztési szeminárium. Siófok, 1994 (Page: 119-120) Intelligens lézer szenzor MAP interfészének kifejlesztése Authors: Haidegger, G; Nagy, G; Kuba, R; Löffler, T Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 115-124) Cell-controller design for a flexible PCB drilling station Authors: Haidegger, G; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 49-52) The applicability of MMS in the future manufacturing systems Authors: Haidegger, G; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 222-225) Object oriented approach for analyzing, designing and controlling manufacturing cells Authors: Nagy, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: AUTOFACT '93 Conference proceedings. Chicago, 1993 (Page: 12-1-12-10) MMS/MAP based and object oriented software approach for controlling shop-floor devices in a CIM enviroment Authors: Nagy, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: 9th international conference on control systems and computer science. CSCS 9. Conference preprints. Bucharest, 1993. Vol. 1. (Page: 391-400) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) East-European requirements for open systems solutions Authors: Harangozó, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: European MAP/TOP users group international conference working with open systems. Paris, 1993 (Page: 1-6) Nyílt rendszerek itt és ott Authors: Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: ALAPLAP (Volume no.: 11, Issue no.: 7, Page: 9-11) Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166) MAP Training Center as a test-bed for OSI products in manufacturing Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371) MAP activities in Hungary - setting up a "MAP Training Center Authors: Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: The enterprise networking event 1992. ENE'92. conference. Training others in OSI forum. Washington, 1992 (Page: 1-10) First experiences with a MAP-networked CIM pilot plant Authors: Kovács, G; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125) Nyíl rendszerek a mechatronikában Authors: Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MECHATRONINFO'92 nemzetközi részvételű konferencia előadásainak anyaga (Page: 137-142) Haidegger, Géza A jövő gyára - kutatási és innováció feladatgyűjtemény az európai gazdaság kilábalási lehetőségeire a globális gazdasági és pénzügyi válságból. Authors: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Gép (Volume no.: 62, Issue no.: 3, Page: 7-13.) The global priorities for sustainable, high added value manufacturing, joint European efforts. Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 232-236.) PRO-FACTORY production technologies and EUREKA. Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 123-129.) Application of TYPUS metrics and KILT modell, recycling and resource-efficient REMAKE solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 197-208.) Interactive multimedia and tele-presence in production. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Journal of Physics: Conference Series (Volume no.: 268, Page: 012015) A Robotika jövője, ROAD-MAPs for Robotics. in: MANUFACTURING 2010 Conference Authors: Perity, Gábor; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) EUREKA and FP7-NMP, Authors: Wögerer, Christian; Sebő, Gábor; Csuzdi , Szonja; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Prepalnned Recycling as a key element for the Factories of the Future Authors: Haidegger, Géza; Dobó , József; Nagy, László Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Factory of the Future with recycling and resource-efficiency in Manufacturing Authors: Bárdos, ZOltánné; Borbás, Lajos; Igaz, Jenő; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Part inspections in 3D; CIS3D, development of a completeness inspection system in 3D for industrial analysis. Authors: Báthor, Miklós; Wögerer, Ch.; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Length: 1-5. page) Positioning the MANUFUTURE National Technology Platform to be the driving tool for our surviving national manufacturing. Authors: Haidegger, Géza; Igaz, Jenő; Borbás, Lajos Department: Computer Integrated Manufacturing Laboratory Date: 2010. 04. Published by: Factory automation 2010. Proceedings. Kecskemét, 2010. (Page: 145.) Manufuture-Hu Nemzeti Technológiai Platform, és a magyar gépgyártás jövőképe. Authors: Igaz, Jenő; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 02. Published by: Hegesztéstechnika (Volume no.: 21, Issue no.: 1, Page: 32-36.) Some iteractive multimedia applications in manufacturing. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 09. Published by: CSIT 2010. Proceedings of the 12th international workshop on computer science and information technologies. Vol. 1. Moscow - St. Petersburg, 2010. (Page: 1-9.) Some interactive multimedia applications in manufacturing Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Abstract book of MURPHYS?2010 Conference (Page: 30) MANUFUTURE-HU nemzeti technológiai platform, és a magyar gépgyártás jövőképe. Authors: Igaz, Jenő; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 195-204.) Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Technology platform MINAM - an instrument for micro- and nanomanufacturing in Europe. Authors: Wögerer, Christian; Dickerhoff, Markus; Haidegger, Géza; Szalay, Tibor Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 57-66.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s. Authors: Kovács, György; Haidegger, Géza; Stokic, D. Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.) INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) Smart Connected and Interactive Production Control in a Distributed Environment Authors: Schlegel, T.; Foursa, M.; Meo, F.; Agirre, J.; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. 06. Published by: Proceedings of the 4th Intelligent Production Machines and Systems (IPROMS) Virtual Conference (Length: 6 page) Download article: [html] Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) Technology platform MINAM - an instrument for micro-and nanomanufacturing in Europe. Authors: Wögerer, C.; Dickerhoff, M.; Haidegger, Géza; Szalay, T. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 44-53.) ManuFuture-Hu: a jövőbeli gyártástechnológia magyar víziója, értékteremtéssel a fenntartható gazdasági növekedésért. Authors: Haidegger, Géza; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 16-17.) SME networks for car recycling in Hungary: an agent-based approach. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: A road map to the development of European SME networks: towards collaborative innovation. (Page: 103-115.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Car-recycling SME network with agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: ERCIM News (Issue no.: 73, Page: 53-54.) Download article: [pdf] Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs. Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Micro- and nano-manufacturing technologies managed as an EU technology platform named: MINAM. Authors: Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 57-58.) Mechatronic systems in sheet metal froming. Authors: Lammers, E.; Paniti, Imre; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 35-48.) Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Car recycling - supported by agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: CSIT'2007. Proceedings of the 9th international workshop on computer science and iformation technologies. Krasnousolsk, Ufa, 2007. Vol. 1. (Page: 1-9.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Control development for mechatronic sheet metal forming processes. Authors: Paniti, Imre; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: microCAD 2007. International scientific conference. Miskolc, 2007. (Page: 207-212.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Agent-based solutions to support car recycling Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: ICM 2006. 3rd IEEE international conference on mechatronics. Budapest, 2006. (Page: 282-287) HAIDEGGER, Géza ManuFuture konferencia a gyártás jövőjéről a Mach-Tech kiállításon Authors: HAJDÚ, György; HAIDEGGER, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 05. Published by: GÉPGYÁRTÁS L- évfolyam, 2010. GTE Industria szám, HU-ISSN 0016-8580 (Volume no.: L- évfolyam, 2010, Page: 3-6) HAJDÚ, György ManuFuture konferencia a gyártás jövőjéről a Mach-Tech kiállításon Authors: HAJDÚ, György; HAIDEGGER, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 05. Published by: GÉPGYÁRTÁS L- évfolyam, 2010. GTE Industria szám, HU-ISSN 0016-8580 (Volume no.: L- évfolyam, 2010, Page: 3-6) Harangozó, J East-European requirements for open systems solutions Authors: Harangozó, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: European MAP/TOP users group international conference working with open systems. Paris, 1993 (Page: 1-6) Hermann, GY Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Herrera, G Next-generation open controllers needed in the factories of the future. Authors: Drozdik, S; Haidegger, G; Herrera, G Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Proceedings of the second Mexican-Hungarian workshop on factory automation and material sciences. Queretaro-San Juan del Rio, 1999. (Page: 77-81) Herrmann Praturlon, A. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Igaz, Jenő Factory of the Future with recycling and resource-efficiency in Manufacturing Authors: Bárdos, ZOltánné; Borbás, Lajos; Igaz, Jenő; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Positioning the MANUFUTURE National Technology Platform to be the driving tool for our surviving national manufacturing. Authors: Haidegger, Géza; Igaz, Jenő; Borbás, Lajos Department: Computer Integrated Manufacturing Laboratory Date: 2010. 04. Published by: Factory automation 2010. Proceedings. Kecskemét, 2010. (Page: 145.) Manufuture-Hu Nemzeti Technológiai Platform, és a magyar gépgyártás jövőképe. Authors: Igaz, Jenő; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 02. Published by: Hegesztéstechnika (Volume no.: 21, Issue no.: 1, Page: 32-36.) MANUFUTURE-HU nemzeti technológiai platform, és a magyar gépgyártás jövőképe. Authors: Igaz, Jenő; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 195-204.) Keul, ZS Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Kopácsi, S Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Application of virtual reality tools for planning, analysing and control of flexible manufacturing systems. Authors: Kopácsi, S; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: Applied informatics (AI'2000). Proceedings of IASTED international conference. Innsbruck, 2000. (Page: 198-202) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) Interaktiv multimedia (ipari) alkalmazásai. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: XXXII. ipari informatika, elektronika, mérés és szabályozás szimpózium előadásai. IEMSZSZ '97. Budapest, 1997. (Page: 1-2) Guidelines on interactive multimedia for use in distance education: the results of EU ACTS projects in interactive multimedia. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: 1997 European Distance Education Network (EDEN) conference. Budapest, 1997. (Page: 166-169) Telepresence with remote vision in robotic applications. Authors: Haidegger, G; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Proceedings. 5th international workshop on robotics in Alpe-Adria-Danube region. RAAD '96. Budapest, 1996. Vol. 1. (Page: 557-562) Kopácsi, Sándor The global priorities for sustainable, high added value manufacturing, joint European efforts. Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 232-236.) PRO-FACTORY production technologies and EUREKA. Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 123-129.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Kovács, G Multimedia technologies provide test scenarios in a national research project Authors: Kovács, G; Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166) MAP Training Center as a test-bed for OSI products in manufacturing Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371) First experiences with a MAP-networked CIM pilot plant Authors: Kovács, G; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125) Kovács, GL Some interactive multimedia applications in production engineering Authors: Kovács, GL; Haidegger, G; Drozdik, S Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ICCC 2005. IEEE 3rd international conference on computational cybernetics. Proceedings. Mauritius, 2005. (Page: 161-167) Interactive multimedia for supporting the quality of the production Authors: Kovács, GL; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45) Business growth through European partnerships conference for SME-s. Budapest, 2005. Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: (Length: 141 page) BEATRICE-SME. Újrahasznosításban élenjáró technológiával dolgozó kisvállalkozások sikeres módszerei Authors: Kovács, GL; Bámer, B; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: GEP (Volume no.: 54, Issue no.: 3-4, Page: 54) Recycling technology implementation by the integration of SME operations Authors: Haidegger, G; Kovács, GL; Bámer, B Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 2. (Page: 611-615) Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Intelligent, open architecture controller using knowledge server. Authors: Nacsa, J; Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33) Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Some problems of intelligent control of open CNCs and manufacturing cells. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28) Interactive multimedia as an affordable tool in factory environment. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: ASI'2000. The annual conference of ICIMS-NOE. Workshop on integration in manufacturing and beyond. IIMB'2000. Life cycle approaches to production systems. Management, control, and supervision. Preprints. Bordeaux, 2000. (Page: 6-7) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Minőségmenedzsment és informatika. (Page: 84-137) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8) Multimedia applications in a virtual enterprise of SME-s. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212) Interactive multimedia applications at the shop floor. Authors: Haidegger, G; Kovács, GL; Kopácsi, S Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: XIII. szerszámgép konferencia. B, D, E, F szekciók kiadványa = XIIIth conference on machine tools. Miskolc, 1998. (Page: 14-22) A multimedia design network for manufacturing systems' management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339) Multimedia design network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Multimedia requirements for management and control of manufacturing systems. Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Preprints of the IFAC-workshop on manufacturing systems: modelling, management and control MIM '97. Vienna, 1997. (Page: 117-122) Számítógépes gyártásirányítás. Authors: Erdélyi, F; Kovács, GL; Haidegger, G; Hermann, GY Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 1. rész. (Page: 235-315) Intelligent control of manufacturing systems using open communications. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180) Gyártó- és szerelőrendszerek irányítási, tervezési és hálózati kérdéseinek vizsgálata a SZTAKI CIM Kutatólaboratóriumában Authors: Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: GEPGYARTASTECHNOLOGIA (Volume no.: 35, Issue no.: 3-4, Page: 117-120) Open systems in manufacturing Authors: Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Second international workshop on learning in intelligent manufacturing systems. Preprints. Budapest, 1995 (Page: 252-259) Kovács, György Application of TYPUS metrics and KILT modell, recycling and resource-efficient REMAKE solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 197-208.) Interactive multimedia and tele-presence in production. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Journal of Physics: Conference Series (Volume no.: 268, Page: 012015) Some iteractive multimedia applications in manufacturing. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 09. Published by: CSIT 2010. Proceedings of the 12th international workshop on computer science and information technologies. Vol. 1. Moscow - St. Petersburg, 2010. (Page: 1-9.) Some interactive multimedia applications in manufacturing Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2011. Published by: Abstract book of MURPHYS?2010 Conference (Page: 30) Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s. Authors: Kovács, György; Haidegger, Géza; Stokic, D. Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.) ManuFuture-Hu: a jövőbeli gyártástechnológia magyar víziója, értékteremtéssel a fenntartható gazdasági növekedésért. Authors: Haidegger, Géza; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Gépgyártás (Volume no.: 48, Issue no.: 4, Page: 16-17.) SME networks for car recycling in Hungary: an agent-based approach. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: A road map to the development of European SME networks: towards collaborative innovation. (Page: 103-115.) Intelligence management of product life-cycle - a maintenance view. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: CSIT 2008. Proceedings of the 10th international workshop on computer science and information technology. Antalya, 2008. Vol. 1. (Volume no.: 1, Page: 1-16.) Car-recycling SME network with agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: ERCIM News (Issue no.: 73, Page: 53-54.) Download article: [pdf] Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) National and EU nanotechnological platform activities. Coordination of actions in nano- and micromanufacturing-technology, in respect of the European IPMMAN and MINAM activies within the EU 6th and 7th framework programs. Authors: Haidegger, Géza; Biró, Zsolt; Kovács, György Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: HUNN - Hungarian Network of Excellent Centres on nanosciences. II. technology transfer day. Budapest, 2007. (Page: 32-36.) A roncsautókezelés informatikai támogatására irányuló E-Mult project céljai és lehetősége az egyablakos adminisztráció bevezetésére. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1. nemzetközi gépjármű nyilvántartási és eredetiségvizsgálati konferencia. Siófok, 2007. (Page: 94-97.) Novel, ICT experiment for implementing a user-friendly scenario for deregistering ELV-s. Authors: Haidegger, Géza; Kovács, György; Kopácsi, Sándor; Drozdik, Szilveszter Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: 1st international conference on vehicle registration and originality examination. Siófok, 2007. (Page: 102-105.) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Car recycling - supported by agent-based solutions. Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: CSIT'2007. Proceedings of the 9th international workshop on computer science and iformation technologies. Krasnousolsk, Ufa, 2007. Vol. 1. (Page: 1-9.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Agent-based solutions to support car recycling Authors: Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: ICM 2006. 3rd IEEE international conference on mechatronics. Budapest, 2006. (Page: 282-287) Kuba, R Highly automated flexible assembly system Authors: Haidegger, G; Kuba, R Department: Computer Integrated Manufacturing Laboratory Date: 1995. Published by: Automatizálás '95 konferecia nemzetközi részvétellel. Automation '95 conference with international participations. Proceedings. Budapest, 1995. Vol. 2. (Page: 347-353) Intelligens lézer szenzor MAP interfészének kifejlesztése Authors: Haidegger, G; Nagy, G; Kuba, R; Löffler, T Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 115-124) Lammers, E. Mechatronic systems in sheet metal froming. Authors: Lammers, E.; Paniti, Imre; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 35-48.) Lichodziejevski, C. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Lichodziejewski, C. Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Löffler, T Intelligens lézer szenzor MAP interfészének kifejlesztése Authors: Haidegger, G; Nagy, G; Kuba, R; Löffler, T Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 115-124) Mazzotti, CG Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) Meo, F. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) Smart Connected and Interactive Production Control in a Distributed Environment Authors: Schlegel, T.; Foursa, M.; Meo, F.; Agirre, J.; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. 06. Published by: Proceedings of the 4th Intelligent Production Machines and Systems (IPROMS) Virtual Conference (Length: 6 page) Download article: [html] INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Mezgár, I A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: Minőségmenedzsment és informatika. (Page: 84-137) Multimedia applications in a virtual enterprise of SME-s. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Preprints of the first international symposium on concurrent enterprising. ISoCE'98. Co-operation towards competitiveness. Sinaia, 1998. (Page: 203-212) A multimedia design network for manufacturing systems' management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: SCI '97. World multiconference on systemics, cybernetics and informatics. Proceedings. Caracas, 1997. Vol. 2. (Page: 332-339) Multimedia design network for manufacturing systems management. Authors: Kovács, GL; Mezgár, I; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: AUTOFACT '97. Conference proceedings. Detroit, 1997. (Page: 458D-458K) A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Mezgár, István Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Michelini, R Ambient intelligence in product life-cycle management Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Michelini, R Department: Computer Integrated Manufacturing Laboratory Date: 2006. Published by: Engineering Applications of Artificial Intelligence (Volume no.: 19, Page: 953-965) Monostori, L Digital factories, production networks. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54) Digital enterprises: A national R&D project in Hungary. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272) Nacsa, J Interactive multimedia for supporting the quality of the production Authors: Kovács, GL; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 44-45) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Intelligent, open architecture controller using knowledge server. Authors: Nacsa, J; Kovács, GL; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Sensors and Controls for Intelligent Manufacturing II. Intelligent Systems and Advanced Manufacturing. Boston, 2001. (Proceedings of SPIE 4563) (Page: 25-33) Some problems of intelligent control of open CNCs and manufacturing cells. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2000. Published by: IFAC symposium on artificial intelligence in real time control. AIRTC-2000. Preprints. Budapest, 2000. (Page: 21-28) Application of software reuse and object-oriented methodologies for the modelling and control of manufacturing systems. Authors: Kovács, GL; Kopácsi, S; Nacsa, J; Haidegger, G; Groumpos, P Department: Computer Integrated Manufacturing Laboratory Date: 1999. Published by: COMPUTERS IN INDUSTRY (Volume no.: 39, Issue no.: 3, Page: 177-189) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Mexican - Hungarian workshop on factory automation and material sciences. Proceedings. Miskolc and Budapest, 1998. (Page: 1-9) Intelligent control applications of open CNCs using G2. Authors: Nacsa, J; Haidegger, G; Kovács, GL Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Gensym Users Society conference proceedings. GUS'98. Newport, 1998. (Page: 1-8) Applying SERCOS industrial control network for OSACA based CNC-s. Authors: Haidegger, G; Nacsa, J; Bausz, I Department: Computer Integrated Manufacturing Laboratory Date: 1998. Published by: Proceedings of the symposium on FIELDBUS systems and application technics. Workshop of th INCO COPERNICUS project. Budapest, 1998. (Page: 85-92) Built-in intelligent control applications of open CNCs. Authors: Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: The second world congress on intelligent manufacturing processes and systems. Proceedings. Budapest, 1997. (Page: 388-392) Shop-floor communication with OSACA-compliant controllers. Authors: Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 355-362) Factory communication systems to meet multi-media requirements. Authors: Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: WFCS '97. Proceedings. 1997 IEEE workshop on factory communication systems. Barcelona, 1997. (Page: 317-320) Intelligent control of manufacturing systems using open communications. Authors: Kovács, GL; Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1996. Published by: Preprints of the 13th world congress of International Federation of Automatic Control. San Francisco, 1996. Vol. B. Manufacturing, social effects, bioproduction, biomedical, environment. (Page: 175-180) Ivhegesztő robotos CAD/CAM munkaállomás specifikálása Authors: Haidegger, G; Nacsa, J; Vass, J; Pepper, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IX. hegesztési szeminárium. Siófok, 1994 (Page: 119-120) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) OSI gyártásautomatizálási termékek vizsgálata a MAP Oktató Központban Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MERES ES AUTOMATIKA (Volume no.: 40, Issue no.: 3, Page: 164-166) MAP Training Center as a test-bed for OSI products in manufacturing Authors: Nacsa, J; Haidegger, G; Kovács, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Automation'92. Conference with international participation. Budapest, 1992. Vol. 2. (Page: 363-371) MAP activities in Hungary - setting up a "MAP Training Center Authors: Nacsa, J; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: The enterprise networking event 1992. ENE'92. conference. Training others in OSI forum. Washington, 1992 (Page: 1-10) First experiences with a MAP-networked CIM pilot plant Authors: Kovács, G; Haidegger, G; Nacsa, J Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: CAD/CAM Technologies (CAMP'92) Budapest. Proceedings of 2nd International Exhibition and Conference (Page: 118-125) Nyíl rendszerek a mechatronikában Authors: Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MECHATRONINFO'92 nemzetközi részvételű konferencia előadásainak anyaga (Page: 137-142) Nacsa, János Managing maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 73-83.) Role of maintenance in life-cycle engineering. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E6, Page: 15-23.) A karbantartás szerepe az élettartamra tervezésben. Authors: Kovács, György; Kopácsi, Sándor; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Gépgyártás (Volume no.: 49, Issue no.: 4-5, Page: 27-35.) Agent-based Predictive Maintenance of Machine Tools Authors: Kopácsi, Sándor; Mezgár, István; Kovács, György; Haidegger, Géza; Nacsa, János Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the Manufacturing 2006 Conference (Page: 109-116) Intelligens hálózatú gyártórendszerek. Authors: Kopácsi, Sándor; Mezgár, István; Haidegger, Géza; Nacsa, János; Kovács, György Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 109-116.) Mechatronic systems in sheet metal froming. Authors: Lammers, E.; Paniti, Imre; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 35-48.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Nagy, G Distributed control of assembly cells based on virtual manufacturing device model Authors: Nagy, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: DCCS'94. Distruted computer control systems. Preprints of the 12th IFAC workshop. Toledo, 1994 (Page: 77-82) Nyílt rendszerek a gyártás-automatizálásban Authors: Haidegger, G; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 43-49) Intelligens lézer szenzor MAP interfészének kifejlesztése Authors: Haidegger, G; Nagy, G; Kuba, R; Löffler, T Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: XXX. ipari elektronikus mérés és szabályozás szimpózium. Előadások. Balatonszéplak, 1994 (Page: 115-124) Cell-controller design for a flexible PCB drilling station Authors: Haidegger, G; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: Mechatronics. The basis for new industrial development. Proceedings of the joint Hungarian-British international mechatronics conference. Budapest, 1993 (Page: 49-52) The applicability of MMS in the future manufacturing systems Authors: Haidegger, G; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IMS'94. 2nd IFAC/IFIP/IFORS Workshop. Intelligent manufacturing systems. Preprints. Vienna, 1994 (Page: 222-225) Object oriented approach for analyzing, designing and controlling manufacturing cells Authors: Nagy, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: AUTOFACT '93 Conference proceedings. Chicago, 1993 (Page: 12-1-12-10) MMS/MAP based and object oriented software approach for controlling shop-floor devices in a CIM enviroment Authors: Nagy, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: 9th international conference on control systems and computer science. CSCS 9. Conference preprints. Bucharest, 1993. Vol. 1. (Page: 391-400) Plans of the MAP training centre in Budapest Authors: Kovács, G; Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1993. Published by: XV. international symposium on nuclear electronics and international seminar. CAMAC-92. Warsaw, 1992. (Joint Institute for Nuclear Research D13-92-581) (Page: 81-91) Nyíl rendszerek a mechatronikában Authors: Haidegger, G; Nacsa, J; Nagy, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: MECHATRONINFO'92 nemzetközi részvételű konferencia előadásainak anyaga (Page: 137-142) Nagy, László Prepalnned Recycling as a key element for the Factories of the Future Authors: Haidegger, Géza; Dobó , József; Nagy, László Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Narayanan, R. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Paniti, Imre The global priorities for sustainable, high added value manufacturing, joint European efforts. Authors: Haidegger, Géza; Paniti, Imre; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 232-236.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) Mechatronic systems in sheet metal froming. Authors: Lammers, E.; Paniti, Imre; Haidegger, Géza; Nacsa, János Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 35-48.) Mechatronikai rendszer prés-szerszámnélküli lemezalakításhoz. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Gép (Volume no.: 58, Issue no.: 12, Page: 21-23.) Tooling for novel ISF-incremental sheet forming. Authors: Paniti, Imre; Kovács, György; Haidegger, Géza; Nacsa, János Editor: Dudás, I.; Szabó, O.; Varga, Gy. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: ICT-2007. Proceedings of the international conference on tools. Miskolc, 2007. (Page: 269-274.) Control development for mechatronic sheet metal forming processes. Authors: Paniti, Imre; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: microCAD 2007. International scientific conference. Miskolc, 2007. (Page: 207-212.) Pepper, S Ivhegesztő robotos CAD/CAM munkaállomás specifikálása Authors: Haidegger, G; Nacsa, J; Vass, J; Pepper, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IX. hegesztési szeminárium. Siófok, 1994 (Page: 119-120) Peredi, Z Clustering individual truck owners - the implementation of novel ICT solutions Authors: Haidegger, G; Keul, ZS; Kovács, GL; Peredi, Z Department: Computer Integrated Manufacturing Laboratory Date: 2003. Published by: Proceedings of the 4th workshop on European scientific and industrial collaboration, WESIC 2003, Miskolc, Vol. 1. (Page: 203-210) Perity, Gábor A Robotika jövője, ROAD-MAPs for Robotics. in: MANUFACTURING 2010 Conference Authors: Perity, Gábor; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Popa, A Multimedia technologies provide test scenarios in a national research project Authors: Kovács, G; Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Intelligent Systems Design and Application. Proceedings of IEEE 4th International Conference ISDA 2004, Budapest, Vol. 1 (Page: 287-291) Assessment of multimedia technologies for use in digital factory projects. Authors: Haidegger, G; Popa, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Gépészet 2002. Proceedings of the third conference on mechanical engineering. Budapest. Vol. 2. (Page: 495-499) Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Puchalski, S. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Repcsényi, Z Appropriate information processing for telemonitoring of manufacturing processes Authors: Szalay, T; Repcsényi, Z; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005. (Page: 51-56) Ruiz, GH Desarollo de un CAM nacinal como alternativa en la automatizacion flexible para la industria Authors: Ruiz, GH; Mazzotti, CG; Kovács, G; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 1992. Published by: Memorias V. congreso latinoamericano de control automatico. Informatica '92. La Habana, 1992. Vol. 1. (Page: 402-408) Ruotsalainen, Werner Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Salle, D. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) Sallé, D. INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Schlegel, T. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) Smart Connected and Interactive Production Control in a Distributed Environment Authors: Schlegel, T.; Foursa, M.; Meo, F.; Agirre, J.; Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. 06. Published by: Proceedings of the 4th Intelligent Production Machines and Systems (IPROMS) Virtual Conference (Length: 6 page) Download article: [html] Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, T.; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 153-159.) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Schlegel, Thomas Ontology-based safety and reliability issues at the factory control operations. Authors: Mezgár, István; Schlegel, Thomas; Foursa, M.; Haidegger, Géza; Kopácsi, Sándor; Paniti, Imre Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 173-179.) Sebő, Gábor EUREKA and FP7-NMP, Authors: Wögerer, Christian; Sebő, Gábor; Csuzdi , Szonja; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Smater, M. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Multi-agent approach for managing production SME networks for optimising estimated costs/benefits. Authors: Kovács, György; Haidegger, Géza; Drozdik, Szilveszter; Biró, Zsolt; Kopácsi, Sándor; Lichodziejewski, C.; Puchalski, S.; Smater, M. Editor: Monostori, László Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: MIM'07. IFAC workshop on manufacturing modelling, management and control. Budapest, 2007. (Page: 37-42.) Sorli, M. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Spuchalski, S. Recycling technologies for end-of-life vehicles based on multi-agent software solutions. Authors: Kovács, György; Haidegger, Géza; Smater, M.; Spuchalski, S. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Proceedings of the manufacturing 2006 conference. Budapest, 2007. (Page: 96-101.) Srinivasan, A. INT-MANUS: interactive production control in a distributed environment Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Salle, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. 07. Published by: Proceedings of the 12th International Conference on Human-Computer Interaction (HCII) (Page: 1150-1159) INT-MANUS: interactive production control in a distributed environment. Authors: Schlegel, T.; Srinivasan, A.; Foursa, M.; Bogen, M.; Narayanan, R.; d'Angelo, D.; Haidegger, Géza; Mezgár, István; Canou, J.; Sallé, D.; Meo, F.; Agirre Ibarbia, J.; Herrmann Praturlon, A. Editor: Jacko, J.A. Department: Computer Integrated Manufacturing Laboratory Date: 2007. Published by: Human-computer interaction. 12th international conference on HCI. Beijing, 2007. Part IV. (Lecture notes in computer science 4552.) (Page: 1150-1159.) Stanescu, A Are present multimedia technologies good enough for applications in idustrial environment? Authors: Popa, A; Kovács, GL; Haidegger, G; Stanescu, A Department: Computer Integrated Manufacturing Laboratory Date: 2002. Published by: Proceedings VIPromCom 2002. 4th EURASIP-IEEE region 8 international symposium on video/image processing and multimedia communications. Zadar (Page: 105-110) Stokic, D. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Car recycling supported by multi-Agent SW technology - enabling efficient dismantling of ELV-s. Authors: Kovács, György; Haidegger, Géza; Stokic, D. Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Journal of Machine Manufacturing (Volume no.: 49, Issue no.: E1, Page: 13-18.) Szakál, L Informatika a gazdaságban. Authors: Erdélyi, F; Szakál, L; Haidegger, G; Vadász, D Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 391-504) Szalay, T Appropriate information processing for telemonitoring of manufacturing processes Authors: Szalay, T; Repcsényi, Z; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Proceedings of the 10th IMEKO TC10. International conference on technical diagnostics. Budapest, 2005. (Page: 51-56) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Szalay, T. Technology platform MINAM - an instrument for micro-and nanomanufacturing in Europe. Authors: Wögerer, C.; Dickerhoff, M.; Haidegger, Géza; Szalay, T. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 44-53.) Szalay, Tibor Technology platform MINAM - an instrument for micro- and nanomanufacturing in Europe. Authors: Wögerer, Christian; Dickerhoff, Markus; Haidegger, Géza; Szalay, Tibor Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 57-66.) Sárközy, F Solutions for an interpreter-enabled multimedia conferencing system Authors: Sárközy, F; Haidegger, G Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: ERCIM NEWS (Issue no.: 62, Page: 32-33) Interactive multimedia test scenarios in digital factory projects Authors: Haidegger, G; Drozdik, SZ; Bámer, B; Kovács, G; Sárközy, F; Nacsa, J; Biró, Zsolt; Kopácsi, S; Boril, ZS; Szalay, T; Anufriev, A Department: Computer Integrated Manufacturing Laboratory Date: 2004. Published by: Manufacturing Systems. Digital Enterprises, Production Networks, Proceedings of the 37th CIRP International Seminar Budapest (Page: 449-455) Terk, E East-West cooperation Authors: Terk, E; Varblene, U; Birchall, D; Haidegger, G; Viia, A Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Enterprises in technology-intensive business. Toolkit for coping with international environment and developing management competences. Module 2. (Page: 26-39) Tóth, T A vállalat egészét átfogó informatikai rendszer koncepciója. Authors: Haidegger, G; Kovács, GL; Mezgár, I; Tóth, T Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: Minőségmenedzsment és informatika. 1. rész. (Page: 86-150) Urosevic, L. Operations management of dismantling and re-use of ELV-s by novel multi-agent system, processing added value and estimation of detailed costs. Authors: Haidegger, Géza; Kovács, György; Ruotsalainen, Werner; Stokic, D.; Lichodziejevski, C.; Urosevic, L.; Smater, M.; Puchalski, S.; Gramma, C.; Sorli, M.; Armijo, A.; Grosse-Hovest, G. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 189-194.) Vadász, D Informatika a gazdaságban. Authors: Erdélyi, F; Szakál, L; Haidegger, G; Vadász, D Department: Computer Integrated Manufacturing Laboratory Date: 1997. Published by: A technológiai menedzsment informatikai eszközei; információ rendszerek. 2. rész. (Page: 391-504) Varblene, U East-West cooperation Authors: Terk, E; Varblene, U; Birchall, D; Haidegger, G; Viia, A Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Enterprises in technology-intensive business. Toolkit for coping with international environment and developing management competences. Module 2. (Page: 26-39) Vass, J Ivhegesztő robotos CAD/CAM munkaállomás specifikálása Authors: Haidegger, G; Nacsa, J; Vass, J; Pepper, S Department: Computer Integrated Manufacturing Laboratory Date: 1994. Published by: IX. hegesztési szeminárium. Siófok, 1994 (Page: 119-120) Viharos, ZSJ Digital factories, production networks. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54) Digital enterprises: A national R&D project in Hungary. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272) Viia, A East-West cooperation Authors: Terk, E; Varblene, U; Birchall, D; Haidegger, G; Viia, A Department: Computer Integrated Manufacturing Laboratory Date: 2005. Published by: Enterprises in technology-intensive business. Toolkit for coping with international environment and developing management competences. Module 2. (Page: 26-39) Váncza, J Digital factories, production networks. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: ERCIM NEWS (Volume no.: 51, Page: 53-54) Digital enterprises: A national R&D project in Hungary. Authors: Monostori, L; Haidegger, G; Váncza, J; Viharos, ZSJ Date: 2002. Published by: Proceedings of the 1st CIRP(UK) seminar on digital enterprise technology. Durham, 2002. Vol. I. Technical papers. (Page: 269-272) Wögerer, C. Technology platform MINAM - an instrument for micro-and nanomanufacturing in Europe. Authors: Wögerer, C.; Dickerhoff, M.; Haidegger, Géza; Szalay, T. Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2008. Published by: Manufacturing 2008. Biannual 19th international conference. Preprints. Budapest, 2008. (Page: 44-53.) Wögerer, Ch. Part inspections in 3D; CIS3D, development of a completeness inspection system in 3D for industrial analysis. Authors: Báthor, Miklós; Wögerer, Ch.; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: Gyártás 2010 - Manufacturing 2010 "Manufuture". Budapest, 2010. (Length: 1-5. page) Wögerer, Christian PRO-FACTORY production technologies and EUREKA. Authors: Wögerer, Christian; Haidegger, Géza; Kopácsi, Sándor Department: Computer Integrated Manufacturing Laboratory Date: 2011. 05. 25. Published by: Factory automation 2011 conference. Győr, 2011. (Page: 123-129.) EUREKA and FP7-NMP, Authors: Wögerer, Christian; Sebő, Gábor; Csuzdi , Szonja; Haidegger, Géza Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2010. 11. Published by: MANUFACTURING-2010 Conference Preprints (Volume no.: XX. Conf.) Technology platform MINAM - an instrument for micro- and nanomanufacturing in Europe. Authors: Wögerer, Christian; Dickerhoff, Markus; Haidegger, Géza; Szalay, Tibor Editor: Haidegger, Géza Department: Computer Integrated Manufacturing Laboratory Date: 2009. Published by: Manufacturing 2008. Biannual 19th international conference. Proceedings. Budapest, 2008. (Page: 57-66.) New search